@@ -983,7 +983,7 @@ static int vdec_stop_capture(struct venus_inst *inst)
switch (inst->codec_state) {
case VENUS_DEC_STATE_DECODING:
ret = hfi_session_flush(inst, HFI_FLUSH_ALL);
- /* fallthrough */
+ fallthrough;
case VENUS_DEC_STATE_DRAIN:
vdec_cancel_dst_buffers(inst);
inst->codec_state = VENUS_DEC_STATE_STOPPED;
@@ -53,7 +53,7 @@ static int qcom_usb_hs_phy_set_mode(struct phy *phy,
case PHY_MODE_USB_OTG:
case PHY_MODE_USB_HOST:
val |= ULPI_INT_IDGRD;
- /* fall through */
+ fallthrough;
case PHY_MODE_USB_DEVICE:
val |= ULPI_INT_SESS_VALID;
default:
@@ -793,13 +793,13 @@ static int pmic_gpio_populate(struct pmic_gpio_state *state,
switch (subtype) {
case PMIC_GPIO_SUBTYPE_GPIO_4CH:
pad->have_buffer = true;
- /* Fall through */
+ fallthrough;
case PMIC_GPIO_SUBTYPE_GPIOC_4CH:
pad->num_sources = 4;
break;
case PMIC_GPIO_SUBTYPE_GPIO_8CH:
pad->have_buffer = true;
- /* Fall through */
+ fallthrough;
case PMIC_GPIO_SUBTYPE_GPIOC_8CH:
pad->num_sources = 8;
break;
@@ -346,7 +346,7 @@ static int pm8xxx_pin_config_set(struct pinctrl_dev *pctldev,
return -EINVAL;
}
pin->pull_up_strength = arg;
- /* FALLTHROUGH */
+ fallthrough;
case PIN_CONFIG_BIAS_PULL_UP:
pin->bias = pin->pull_up_strength;
banks |= BIT(2);
@@ -553,7 +553,7 @@ static void qcom_glink_receive_version(struct qcom_glink *glink,
break;
case GLINK_VERSION_1:
glink->features &= features;
- /* FALLTHROUGH */
+ fallthrough;
default:
qcom_glink_send_version_ack(glink);
break;
@@ -584,7 +584,7 @@ static void qcom_glink_receive_version_ack(struct qcom_glink *glink,
break;
glink->features &= features;
- /* FALLTHROUGH */
+ fallthrough;
default:
qcom_glink_send_version(glink);
break;
@@ -325,7 +325,7 @@ static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
debugfs_create_x32("raw_device_number", 0400,
qcom_socinfo->dbg_root,
&qcom_socinfo->info.raw_device_num);
- /* Fall through */
+ fallthrough;
case SOCINFO_VERSION(0, 11):
case SOCINFO_VERSION(0, 10):
case SOCINFO_VERSION(0, 9):
@@ -333,12 +333,12 @@ static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
debugfs_create_u32("foundry_id", 0400, qcom_socinfo->dbg_root,
&qcom_socinfo->info.foundry_id);
- /* Fall through */
+ fallthrough;
case SOCINFO_VERSION(0, 8):
case SOCINFO_VERSION(0, 7):
DEBUGFS_ADD(info, pmic_model);
DEBUGFS_ADD(info, pmic_die_rev);
- /* Fall through */
+ fallthrough;
case SOCINFO_VERSION(0, 6):
qcom_socinfo->info.hw_plat_subtype =
__le32_to_cpu(info->hw_plat_subtype);
@@ -346,7 +346,7 @@ static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
debugfs_create_u32("hardware_platform_subtype", 0400,
qcom_socinfo->dbg_root,
&qcom_socinfo->info.hw_plat_subtype);
- /* Fall through */
+ fallthrough;
case SOCINFO_VERSION(0, 5):
qcom_socinfo->info.accessory_chip =
__le32_to_cpu(info->accessory_chip);
@@ -354,27 +354,27 @@ static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
debugfs_create_u32("accessory_chip", 0400,
qcom_socinfo->dbg_root,
&qcom_socinfo->info.accessory_chip);
- /* Fall through */
+ fallthrough;
case SOCINFO_VERSION(0, 4):
qcom_socinfo->info.plat_ver = __le32_to_cpu(info->plat_ver);
debugfs_create_u32("platform_version", 0400,
qcom_socinfo->dbg_root,
&qcom_socinfo->info.plat_ver);
- /* Fall through */
+ fallthrough;
case SOCINFO_VERSION(0, 3):
qcom_socinfo->info.hw_plat = __le32_to_cpu(info->hw_plat);
debugfs_create_u32("hardware_platform", 0400,
qcom_socinfo->dbg_root,
&qcom_socinfo->info.hw_plat);
- /* Fall through */
+ fallthrough;
case SOCINFO_VERSION(0, 2):
qcom_socinfo->info.raw_ver = __le32_to_cpu(info->raw_ver);
debugfs_create_u32("raw_version", 0400, qcom_socinfo->dbg_root,
&qcom_socinfo->info.raw_ver);
- /* Fall through */
+ fallthrough;
case SOCINFO_VERSION(0, 1):
DEBUGFS_ADD(info, build_id);
break;
@@ -163,7 +163,7 @@ static int calibrate_8916(struct tsens_priv *priv)
p2[4] = (qfprom_cdata[1] & MSM8916_S4_P2_MASK) >> MSM8916_S4_P2_SHIFT;
for (i = 0; i < priv->num_sensors; i++)
p2[i] = ((base1 + p2[i]) << 3);
- /* Fall through */
+ fallthrough;
case ONE_PT_CALIB2:
base0 = (qfprom_cdata[0] & MSM8916_BASE0_MASK);
p1[0] = (qfprom_cdata[0] & MSM8916_S0_P1_MASK) >> MSM8916_S0_P1_SHIFT;
@@ -228,7 +228,7 @@ static int calibrate_8974(struct tsens_priv *priv)
p2[8] = (calib[5] & S8_P2_BKP_MASK) >> S8_P2_BKP_SHIFT;
p2[9] = (calib[5] & S9_P2_BKP_MASK) >> S9_P2_BKP_SHIFT;
p2[10] = (calib[5] & S10_P2_BKP_MASK) >> S10_P2_BKP_SHIFT;
- /* Fall through */
+ fallthrough;
case ONE_PT_CALIB:
case ONE_PT_CALIB2:
base1 = bkp[0] & BASE1_MASK;
@@ -263,7 +263,7 @@ static int calibrate_8974(struct tsens_priv *priv)
p2[8] = (calib[4] & S8_P2_MASK) >> S8_P2_SHIFT;
p2[9] = (calib[4] & S9_P2_MASK) >> S9_P2_SHIFT;
p2[10] = (calib[4] & S10_P2_MASK) >> S10_P2_SHIFT;
- /* Fall through */
+ fallthrough;
case ONE_PT_CALIB:
case ONE_PT_CALIB2:
base1 = calib[0] & BASE1_MASK;
@@ -293,7 +293,7 @@ static int calibrate_8974(struct tsens_priv *priv)
p2[i] <<= 2;
p2[i] |= BIT_APPEND;
}
- /* Fall through */
+ fallthrough;
case ONE_PT_CALIB2:
for (i = 0; i < priv->num_sensors; i++) {
p1[i] += base1;
@@ -202,7 +202,7 @@ static int calibrate_v1(struct tsens_priv *priv)
p2[9] = (qfprom_cdata[3] & S9_P2_MASK) >> S9_P2_SHIFT;
for (i = 0; i < priv->num_sensors; i++)
p2[i] = ((base1 + p2[i]) << 2);
- /* Fall through */
+ fallthrough;
case ONE_PT_CALIB2:
base0 = (qfprom_cdata[4] & BASE0_MASK) >> BASE0_SHIFT;
p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
@@ -263,7 +263,7 @@ static int calibrate_8976(struct tsens_priv *priv)
for (i = 0; i < priv->num_sensors; i++)
p2[i] = ((base1 + p2[i]) << 2);
- /* Fall through */
+ fallthrough;
case ONE_PT_CALIB2:
base0 = qfprom_cdata[0] & MSM8976_BASE0_MASK;
p1[0] = (qfprom_cdata[0] & MSM8976_S0_P1_MASK) >> MSM8976_S0_P1_SHIFT;
Convert the various uses of fallthrough comments to fallthrough; Done via script Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe.com/ Signed-off-by: Joe Perches <joe@perches.com> --- drivers/media/platform/qcom/venus/vdec.c | 2 +- drivers/phy/qualcomm/phy-qcom-usb-hs.c | 2 +- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 4 ++-- drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c | 2 +- drivers/rpmsg/qcom_glink_native.c | 4 ++-- drivers/soc/qcom/socinfo.c | 16 ++++++++-------- drivers/thermal/qcom/tsens-v0_1.c | 8 ++++---- drivers/thermal/qcom/tsens-v1.c | 4 ++-- 8 files changed, 21 insertions(+), 21 deletions(-)