new file mode 100644
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/amlogic,meson-mx-sdhc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SDHC controller Device Tree Bindings
+
+allOf:
+ - $ref: "mmc-controller.yaml"
+
+maintainers:
+ - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |
+ The SDHC MMC host controller on Amlogic SoCs provides an eMMC and MMC
+ card interface with 1/4/8-bit bus width.
+ It supports eMMC spec 4.4x/4.5x including HS200 (up to 100MHz clock).
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - amlogic,meson8-sdhc
+ - amlogic,meson8b-sdhc
+ - amlogic,meson8m2-sdhc
+ - const: amlogic,meson-mx-sdhc
+
+ reg:
+ minItems: 1
+
+ interrupts:
+ minItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ clocks:
+ minItems: 9
+
+ clock-names:
+ items:
+ - const: clkin0
+ - const: clkin1
+ - const: clkin2
+ - const: clkin3
+ - const: pclk
+ - const: mod_clk
+ - const: sd_clk
+ - const: tx_clk
+ - const: rx_clk
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#clock-cells"
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/meson-mx-sdhc-clkc.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ sdhc: mmc@8e00 {
+ compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+ reg = <0x8e00 0x42>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+ #clock-cells = <1>;
+ clocks = <&xtal>,
+ <&fclk_div4>,
+ <&fclk_div3>,
+ <&fclk_div5>,
+ <&sdhc_pclk>,
+ <&sdhc SDHC_CLKID_MOD_CLK>,
+ <&sdhc SDHC_CLKID_SD_CLK>,
+ <&sdhc SDHC_CLKID_TX_CLK>,
+ <&sdhc SDHC_CLKID_RX_CLK>;
+ clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk",
+ "mod_clk", "sd_clk", "tx_clk", "rx_clk";
+ };
new file mode 100644
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#define SDHC_CLKID_SRC_SEL 0
+#define SDHC_CLKID_DIV 1
+#define SDHC_CLKID_MOD_CLK 2
+#define SDHC_CLKID_SD_CLK 3
+#define SDHC_CLKID_TX_CLK 4
+#define SDHC_CLKID_RX_CLK 5
This documents the devicetree bindings for the SDHC MMC host controller found in Meson6, Meson8, Meson8b and Meson8m2 SoCs. It can use a bus-width of 1/4/8-bit and it supports eMMC spec 4.4x/4.5x including HS200 mode (up to 100MHz clock). It embeds an internal clock controller which outputs four clocks (mod_clk, sd_clk, tx_clk and rx_clk) and is fed by four external input clocks (clkin[0-3]). "pclk" is the module register clock, it has to be enabled to access the registers. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- .../bindings/mmc/amlogic,meson-mx-sdhc.yaml | 83 +++++++++++++++++++ .../dt-bindings/clock/meson-mx-sdhc-clkc.h | 8 ++ 2 files changed, 91 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml create mode 100644 include/dt-bindings/clock/meson-mx-sdhc-clkc.h