@@ -1,173 +1 @@
-* Common leds properties.
-
-LED and flash LED devices provide the same basic functionality as current
-regulators, but extended with LED and flash LED specific features like
-blinking patterns, flash timeout, flash faults and external flash strobe mode.
-
-Many LED devices expose more than one current output that can be connected
-to one or more discrete LED component. Since the arrangement of connections
-can influence the way of the LED device initialization, the LED components
-have to be tightly coupled with the LED device binding. They are represented
-by child nodes of the parent LED device binding.
-
-
-Optional properties for child nodes:
-- led-sources : List of device current outputs the LED is connected to. The
- outputs are identified by the numbers that must be defined
- in the LED device binding documentation.
-
-- function: LED functon. Use one of the LED_FUNCTION_* prefixed definitions
- from the header include/dt-bindings/leds/common.h.
- If there is no matching LED_FUNCTION available, add a new one.
-
-- color : Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions
- from the header include/dt-bindings/leds/common.h.
- If there is no matching LED_COLOR_ID available, add a new one.
-
-- function-enumerator: Integer to be used when more than one instance
- of the same function is needed, differing only with
- an ordinal number.
-
-- label : The label for this LED. If omitted, the label is taken from the node
- name (excluding the unit address). It has to uniquely identify
- a device, i.e. no other LED class device can be assigned the same
- label. This property is deprecated - use 'function' and 'color'
- properties instead. function-enumerator has no effect when this
- property is present.
-
-- default-state : The initial state of the LED. Valid values are "on", "off",
- and "keep". If the LED is already on or off and the default-state property is
- set the to same value, then no glitch should be produced where the LED
- momentarily turns off (or on). The "keep" setting will keep the LED at
- whatever its current state is, without producing a glitch. The default is
- off if this property is not present.
-
-- linux,default-trigger : This parameter, if present, is a
- string defining the trigger assigned to the LED. Current triggers are:
- "backlight" - LED will act as a back-light, controlled by the framebuffer
- system
- "default-on" - LED will turn on (but for leds-gpio see "default-state"
- property in Documentation/devicetree/bindings/leds/leds-gpio.txt)
- "heartbeat" - LED "double" flashes at a load average based rate
- "disk-activity" - LED indicates disk activity
- "ide-disk" - LED indicates IDE disk activity (deprecated),
- in new implementations use "disk-activity"
- "timer" - LED flashes at a fixed, configurable rate
- "pattern" - LED alters the brightness for the specified duration with one
- software timer (requires "led-pattern" property)
-
-- led-pattern : Array of integers with default pattern for certain triggers.
- Each trigger may parse this property differently:
- - one-shot : two numbers specifying delay on and delay off (in ms),
- - timer : two numbers specifying delay on and delay off (in ms),
- - pattern : the pattern is given by a series of tuples, of
- brightness and duration (in ms). The exact format is
- described in:
- Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
-
-
-- led-max-microamp : Maximum LED supply current in microamperes. This property
- can be made mandatory for the board configurations
- introducing a risk of hardware damage in case an excessive
- current is set.
- For flash LED controllers with configurable current this
- property is mandatory for the LEDs in the non-flash modes
- (e.g. torch or indicator).
-
-- panic-indicator : This property specifies that the LED should be used,
- if at all possible, as a panic indicator.
-
-- trigger-sources : List of devices which should be used as a source triggering
- this LED activity. Some LEDs can be related to a specific
- device and should somehow indicate its state. E.g. USB 2.0
- LED may react to device(s) in a USB 2.0 port(s).
- Another common example is switch or router with multiple
- Ethernet ports each of them having its own LED assigned
- (assuming they are not hardwired). In such cases this
- property should contain phandle(s) of related source
- device(s).
- In many cases LED can be related to more than one device
- (e.g. one USB LED vs. multiple USB ports). Each source
- should be represented by a node in the device tree and be
- referenced by a phandle and a set of phandle arguments. A
- length of arguments should be specified by the
- #trigger-source-cells property in the source node.
-
-Required properties for flash LED child nodes:
-- flash-max-microamp : Maximum flash LED supply current in microamperes.
-- flash-max-timeout-us : Maximum timeout in microseconds after which the flash
- LED is turned off.
-
-For controllers that have no configurable current the flash-max-microamp
-property can be omitted.
-For controllers that have no configurable timeout the flash-max-timeout-us
-property can be omitted.
-
-* Trigger source providers
-
-Each trigger source should be represented by a device tree node. It may be e.g.
-a USB port or an Ethernet device.
-
-Required properties for trigger source:
-- #trigger-source-cells : Number of cells in a source trigger. Typically 0 for
- nodes of simple trigger sources (e.g. a specific USB
- port).
-
-* Examples
-
-#include <dt-bindings/leds/common.h>
-
-led-controller@0 {
- compatible = "gpio-leds";
-
- led0 {
- function = LED_FUNCTION_STATUS;
- linux,default-trigger = "heartbeat";
- gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
- };
-
- led1 {
- function = LED_FUNCTION_USB;
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- };
-};
-
-led-controller@0 {
- compatible = "maxim,max77693-led";
-
- led {
- function = LED_FUNCTION_FLASH;
- color = <LED_COLOR_ID_WHITE>;
- led-sources = <0>, <1>;
- led-max-microamp = <50000>;
- flash-max-microamp = <320000>;
- flash-max-timeout-us = <500000>;
- };
-};
-
-led-controller@30 {
- compatible = "panasonic,an30259a";
- reg = <0x30>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@1 {
- reg = <1>;
- linux,default-trigger = "heartbeat";
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <1>;
- };
-
- led@2 {
- reg = <2>;
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <2>;
- };
-
- led@3 {
- reg = <3>;
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <3>;
- };
-};
+This file has moved to ./common.yaml.
new file mode 100644
@@ -0,0 +1,228 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common leds properties
+
+maintainers:
+ - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+ - Pavel Machek <pavel@ucw.cz>
+
+description:
+ LED and flash LED devices provide the same basic functionality as current
+ regulators, but extended with LED and flash LED specific features like
+ blinking patterns, flash timeout, flash faults and external flash strobe mode.
+
+ Many LED devices expose more than one current output that can be connected
+ to one or more discrete LED component. Since the arrangement of connections
+ can influence the way of the LED device initialization, the LED components
+ have to be tightly coupled with the LED device binding. They are represented
+ by child nodes of the parent LED device binding.
+
+properties:
+ led-sources:
+ description:
+ List of device current outputs the LED is connected to. The outputs are
+ identified by the numbers that must be defined in the LED device binding
+ documentation.
+ $ref: /schemas/types.yaml#definitions/uint32-array
+
+ function:
+ description:
+ LED function. Use one of the LED_FUNCTION_* prefixed definitions
+ from the header include/dt-bindings/leds/common.h. If there is no
+ matching LED_FUNCTION available, add a new one.
+ $ref: /schemas/types.yaml#definitions/string
+
+ color:
+ description:
+ Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
+ the header include/dt-bindings/leds/common.h. If there is no matching
+ LED_COLOR_ID available, add a new one.
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32
+ minimum: 0
+ maximum: 8
+
+ function-enumerator:
+ description:
+ Integer to be used when more than one instance of the same function is
+ needed, differing only with an ordinal number.
+ $ref: /schemas/types.yaml#definitions/uint32
+
+ label:
+ description:
+ The label for this LED. If omitted, the label is taken from the node name
+ (excluding the unit address). It has to uniquely identify a device, i.e.
+ no other LED class device can be assigned the same label. This property is
+ deprecated - use 'function' and 'color' properties instead.
+ function-enumerator has no effect when this property is present.
+
+ default-state:
+ description:
+ The initial state of the LED. If the LED is already on or off and the
+ default-state property is set the to same value, then no glitch should be
+ produced where the LED momentarily turns off (or on). The "keep" setting
+ will keep the LED at whatever its current state is, without producing a
+ glitch.
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/string
+ enum:
+ - on
+ - off
+ - keep
+ default: off
+
+ linux,default-trigger:
+ description:
+ This parameter, if present, is a string defining the trigger assigned to
+ the LED.
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/string
+ enum:
+ # LED will act as a back-light, controlled by the framebuffer system
+ - backlight
+ # LED will turn on (but for leds-gpio see "default-state" property in
+ # Documentation/devicetree/bindings/leds/leds-gpio.txt)
+ - default-on
+ # LED "double" flashes at a load average based rate
+ - heartbeat
+ # LED indicates disk activity
+ - disk-activity
+ # LED indicates IDE disk activity (deprecated), in new implementations
+ # use "disk-activity"
+ - ide-disk
+ # LED flashes at a fixed, configurable rate
+ - timer
+ # LED alters the brightness for the specified duration with one software
+ # timer (requires "led-pattern" property)
+ - pattern
+
+ led-pattern:
+ description: |
+ Array of integers with default pattern for certain triggers.
+
+ Each trigger may parse this property differently:
+ - one-shot : two numbers specifying delay on and delay off (in ms),
+ - timer : two numbers specifying delay on and delay off (in ms),
+ - pattern : the pattern is given by a series of tuples, of
+ brightness and duration (in ms). The exact format is
+ described in:
+ Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32-matrix
+ items:
+ minItems: 2
+ maxItems: 2
+
+ led-max-microamp:
+ description:
+ Maximum LED supply current in microamperes. This property can be made
+ mandatory for the board configurations introducing a risk of hardware
+ damage in case an excessive current is set.
+ For flash LED controllers with configurable current this property is
+ mandatory for the LEDs in the non-flash modes (e.g. torch or indicator).
+
+ panic-indicator:
+ description:
+ This property specifies that the LED should be used, if at all possible,
+ as a panic indicator.
+ type: boolean
+
+ trigger-sources:
+ description: |
+ List of devices which should be used as a source triggering this LED
+ activity. Some LEDs can be related to a specific device and should somehow
+ indicate its state. E.g. USB 2.0 LED may react to device(s) in a USB 2.0
+ port(s).
+ Another common example is switch or router with multiple Ethernet ports
+ each of them having its own LED assigned (assuming they are not
+ hardwired). In such cases this property should contain phandle(s) of
+ related source device(s).
+ In many cases LED can be related to more than one device (e.g. one USB LED
+ vs. multiple USB ports). Each source should be represented by a node in
+ the device tree and be referenced by a phandle and a set of phandle
+ arguments. A length of arguments should be specified by the
+ #trigger-source-cells property in the source node.
+ $ref: /schemas/types.yaml#definitions/phandle-array
+
+ # Required properties for flash LED child nodes:
+ flash-max-microamp:
+ description:
+ Maximum flash LED supply current in microamperes. Required for flash LED
+ nodes with configurable current.
+
+ flash-max-timeout-us:
+ description:
+ Maximum timeout in microseconds after which the flash LED is turned off.
+ Required for flash LED nodes with configurable timeout.
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ led-controller {
+ compatible = "gpio-leds";
+
+ led0 {
+ function = LED_FUNCTION_STATUS;
+ linux,default-trigger = "heartbeat";
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led1 {
+ function = LED_FUNCTION_USB;
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ };
+ };
+
+ led-controller@0 {
+ compatible = "maxim,max77693-led";
+ reg = <0 0x100>;
+
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <0>, <1>;
+ led-max-microamp = <50000>;
+ flash-max-microamp = <320000>;
+ flash-max-timeout-us = <500000>;
+ };
+ };
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@30 {
+ compatible = "panasonic,an30259a";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ linux,default-trigger = "heartbeat";
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ };
+
+ led@2 {
+ reg = <2>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ };
+
+ led@3 {
+ reg = <3>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <3>;
+ };
+ };
+ };
+
+...
new file mode 100644
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/trigger-source.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trigger source providers
+
+maintainers:
+ - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+ - Pavel Machek <pavel@ucw.cz>
+
+description:
+ Each trigger source provider should be represented by a device tree node. It
+ may be e.g. a USB port or an Ethernet device.
+
+properties:
+ '#trigger-source-cells':
+ description:
+ Number of cells in a source trigger. Typically 0 for nodes of simple
+ trigger sources (e.g. a specific USB port).
+ enum: [ 0, 1 ]
+
+...
Convert the common LEDs properties bindings to a schema. As trigger source providers are different nodes, we need to split trigger source properties to a separate file. Bindings for LED controllers can reference the common schema for the LED child nodes: patternProperties: "^led@[0-4]": type: object allOf: - $ref: common.yaml# Cc: Pavel Machek <pavel@ucw.cz> Cc: Dan Murphy <dmurphy@ti.com> Cc: linux-leds@vger.kernel.org Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> --- Jacek, Please take this via led tree v2: - Fix typo in function .../devicetree/bindings/leds/common.txt | 174 +------------ .../devicetree/bindings/leds/common.yaml | 228 ++++++++++++++++++ .../bindings/leds/trigger-source.yaml | 24 ++ 3 files changed, 253 insertions(+), 173 deletions(-) create mode 100644 Documentation/devicetree/bindings/leds/common.yaml create mode 100644 Documentation/devicetree/bindings/leds/trigger-source.yaml