diff mbox

[6/8] KVM: arm-vgic: Add vgic reg access from dev attr

Message ID 20130925203803.GF32311@cbox
State New
Headers show

Commit Message

Christoffer Dall Sept. 25, 2013, 8:38 p.m. UTC
On Sun, Aug 25, 2013 at 04:21:58PM +0100, Alexander Graf wrote:
> 
> On 23.08.2013, at 20:20, Christoffer Dall wrote:
> 
> > Add infrastructure to handle distributor and cpu interface register
> > accesses through the KVM_{GET/SET}_DEVICE_ATTR interface by adding the
> > KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_CPU_REGS groups
> > and defining the semantics of the attr field to be the MMIO offset as
> > specified in the GICv2 specs.
> > 
> > Missing register accesses or other changes in individual register access
> > functions to support save/restore of the VGIC state is added in
> > subsequent patches.
> > 
> > Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
> > ---
> > Documentation/virtual/kvm/devices/arm-vgic.txt |   35 ++++++
> > virt/kvm/arm/vgic.c                            |  143 ++++++++++++++++++++++++
> > 2 files changed, 178 insertions(+)
> > 
> > diff --git a/Documentation/virtual/kvm/devices/arm-vgic.txt b/Documentation/virtual/kvm/devices/arm-vgic.txt
> > index c9febb2..1b68475 100644
> > --- a/Documentation/virtual/kvm/devices/arm-vgic.txt
> > +++ b/Documentation/virtual/kvm/devices/arm-vgic.txt
> > @@ -19,3 +19,38 @@ Groups:
> >     KVM_VGIC_V2_ADDR_TYPE_CPU (rw, 64-bit)
> >       Base address in the guest physical address space of the GIC virtual cpu
> >       interface register mappings.
> > +
> > +  KVM_DEV_ARM_VGIC_GRP_DIST_REGS
> > +  Attributes:
> > +    The attr field of kvm_device_attr encodes two values:
> > +    bits:     | 63   ....  40 | 39 ..  32  |  31   ....    0 |
> > +    values:   |    reserved   |   cpu id   |      offset     |
> > +
> > +    All distributor regs are (rw, 32-bit)
> > +
> > +    The offset is relative to the "Distributor base address" as defined in the
> > +    GICv2 specs.  Getting or setting such a register has the same effect as
> > +    reading or writing the register on the actual hardware from the cpu
> > +    specified with cpu id field.  Note that most distributor fields are not
> > +    banked, but return the same value regardless of the cpu id used to access
> > +    the register.
> > +  Limitations:
> > +    - Priorities are not implemented, and registers are RAZ/WI
> > +  Errors:
> > +    - ENODEV: Getting or setting this register is not yet supported
> > +
> > +  KVM_DEV_ARM_VGIC_GRP_CPU_REGS
> > +  Attributes:
> > +    The attr field of kvm_device_attr encodes two values:
> > +    bits:     | 63   ....  40 | 39 ..  32  |  31   ....    0 |
> > +    values:   |    reserved   |   cpu id   |      offset     |
> > +
> > +    All CPU regs are (rw, 32-bit)
> > +
> > +    The offsetspecifies the offset from the "CPU interface base address" as
> 
> offset specifies
> 
> > +    defined in the GICv2 specs.  Getting or setting such a register has the
> > +    same effect as reading or writing the register on the actual hardware.
> > +  Limitations:
> > +    - Priorities are not implemented, and registers are RAZ/WI
> > +  Errors:
> > +    - ENODEV: Getting or setting this register is not yet supported
> > diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> > index 629caeb..e31625c 100644
> > --- a/virt/kvm/arm/vgic.c
> > +++ b/virt/kvm/arm/vgic.c
> > @@ -591,11 +591,29 @@ static bool handle_mmio_sgi_reg(struct kvm_vcpu *vcpu,
> > 	return false;
> > }
> > 
> > +static bool handle_mmio_sgi_clear(struct kvm_vcpu *vcpu,
> > +				  struct kvm_exit_mmio *mmio,
> > +				  phys_addr_t offset)
> > +{
> > +	return false;
> > +}
> > +
> > +static bool handle_mmio_sgi_set(struct kvm_vcpu *vcpu,
> > +				struct kvm_exit_mmio *mmio,
> > +				phys_addr_t offset)
> > +{
> > +	return false;
> > +}
> > +
> > /*
> >  * I would have liked to use the kvm_bus_io_*() API instead, but it
> >  * cannot cope with banked registers (only the VM pointer is passed
> >  * around, and we need the vcpu). One of these days, someone please
> >  * fix it!
> > + *
> > + * Note that the handle_mmio implementations should not use the phys_addr
> > + * field from the kvm_exit_mmio struct as this will not have any sane values
> > + * when used to save/restore state from user space.
> >  */
> > struct mmio_range {
> > 	phys_addr_t base;
> > @@ -665,6 +683,16 @@ static const struct mmio_range vgic_dist_ranges[] = {
> > 		.len		= 4,
> > 		.handle_mmio	= handle_mmio_sgi_reg,
> > 	},
> > +	{
> > +		.base		= GIC_DIST_SGI_CLEAR,
> > +		.len		= VGIC_NR_SGIS,
> > +		.handle_mmio	= handle_mmio_sgi_clear,
> > +	},
> > +	{
> > +		.base		= GIC_DIST_SGI_SET,
> > +		.len		= VGIC_NR_SGIS,
> > +		.handle_mmio	= handle_mmio_sgi_set,
> > +	},
> > 	{}
> > };
> > 
> > @@ -1543,6 +1571,80 @@ int kvm_vgic_addr(struct kvm *kvm, unsigned long type, u64 *addr, bool write)
> > 	return r;
> > }
> > 
> > +static bool handle_cpu_mmio_misc(struct kvm_vcpu *vcpu,
> > +				 struct kvm_exit_mmio *mmio, phys_addr_t offset)
> > +{
> > +	return true;
> > +}
> > +
> > +static const struct mmio_range vgic_cpu_ranges[] = {
> > +	{
> > +		.base		= GIC_CPU_CTRL,
> > +		.len		= 12,
> > +		.handle_mmio	= handle_cpu_mmio_misc,
> > +	},
> > +	{
> > +		.base		= GIC_CPU_ALIAS_BINPOINT,
> > +		.len		= 4,
> > +		.handle_mmio	= handle_cpu_mmio_misc,
> > +	},
> > +	{
> > +		.base		= GIC_CPU_ACTIVEPRIO,
> > +		.len		= 16,
> > +		.handle_mmio	= handle_cpu_mmio_misc,
> > +	},
> > +	{
> > +		.base		= GIC_CPU_IDENT,
> > +		.len		= 4,
> > +		.handle_mmio	= handle_cpu_mmio_misc,
> > +	},
> > +};
> > +
> > +static struct kvm_exit_mmio dev_attr_mmio = { .len = 4 };
> > +
> > +static int vgic_attr_regs_access(struct kvm_device *dev,
> > +				 struct kvm_device_attr *attr,
> > +				 u32 *reg, bool is_write)
> > +{
> > +	const struct mmio_range *r = NULL;
> > +	phys_addr_t offset;
> > +	int cpuid;
> > +	struct kvm_vcpu *vcpu;
> > +	struct kvm_exit_mmio mmio;
> > +
> > +	offset = attr->attr & KVM_DEV_ARM_VGIC_OFFSET_MASK;
> > +	cpuid = (attr->attr & KVM_DEV_ARM_VGIC_CPUID_MASK) >>
> > +		KVM_DEV_ARM_VGIC_CPUID_SHIFT;
> > +
> > +	if (cpuid >= atomic_read(&dev->kvm->online_vcpus))
> > +		return -EINVAL;
> > +
> > +	vcpu = kvm_get_vcpu(dev->kvm, cpuid);
> > +
> > +	mmio.len = 4;
> > +	mmio.is_write = is_write;
> > +	if (is_write)
> > +		memcpy(mmio.data, reg, sizeof(*reg));
> 
> Is this endianness safe?
> 
With a big-endian kernel, no.  But I suspect that breaks KVM elsewhere
too.  However, this is actually nicer:


Thanks,
-Christoffer

Comments

Christoffer Dall Sept. 25, 2013, 8:49 p.m. UTC | #1
On Wed, Sep 25, 2013 at 01:38:03PM -0700, Christoffer Dall wrote:
> On Sun, Aug 25, 2013 at 04:21:58PM +0100, Alexander Graf wrote:
> > 
> > On 23.08.2013, at 20:20, Christoffer Dall wrote:
> > 
> > > Add infrastructure to handle distributor and cpu interface register
> > > accesses through the KVM_{GET/SET}_DEVICE_ATTR interface by adding the
> > > KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_CPU_REGS groups
> > > and defining the semantics of the attr field to be the MMIO offset as
> > > specified in the GICv2 specs.
> > > 
> > > Missing register accesses or other changes in individual register access
> > > functions to support save/restore of the VGIC state is added in
> > > subsequent patches.
> > > 
> > > Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
> > > ---
> > > Documentation/virtual/kvm/devices/arm-vgic.txt |   35 ++++++
> > > virt/kvm/arm/vgic.c                            |  143 ++++++++++++++++++++++++
> > > 2 files changed, 178 insertions(+)
> > > 
> > > diff --git a/Documentation/virtual/kvm/devices/arm-vgic.txt b/Documentation/virtual/kvm/devices/arm-vgic.txt
> > > index c9febb2..1b68475 100644
> > > --- a/Documentation/virtual/kvm/devices/arm-vgic.txt
> > > +++ b/Documentation/virtual/kvm/devices/arm-vgic.txt
> > > @@ -19,3 +19,38 @@ Groups:
> > >     KVM_VGIC_V2_ADDR_TYPE_CPU (rw, 64-bit)
> > >       Base address in the guest physical address space of the GIC virtual cpu
> > >       interface register mappings.
> > > +
> > > +  KVM_DEV_ARM_VGIC_GRP_DIST_REGS
> > > +  Attributes:
> > > +    The attr field of kvm_device_attr encodes two values:
> > > +    bits:     | 63   ....  40 | 39 ..  32  |  31   ....    0 |
> > > +    values:   |    reserved   |   cpu id   |      offset     |
> > > +
> > > +    All distributor regs are (rw, 32-bit)
> > > +
> > > +    The offset is relative to the "Distributor base address" as defined in the
> > > +    GICv2 specs.  Getting or setting such a register has the same effect as
> > > +    reading or writing the register on the actual hardware from the cpu
> > > +    specified with cpu id field.  Note that most distributor fields are not
> > > +    banked, but return the same value regardless of the cpu id used to access
> > > +    the register.
> > > +  Limitations:
> > > +    - Priorities are not implemented, and registers are RAZ/WI
> > > +  Errors:
> > > +    - ENODEV: Getting or setting this register is not yet supported
> > > +
> > > +  KVM_DEV_ARM_VGIC_GRP_CPU_REGS
> > > +  Attributes:
> > > +    The attr field of kvm_device_attr encodes two values:
> > > +    bits:     | 63   ....  40 | 39 ..  32  |  31   ....    0 |
> > > +    values:   |    reserved   |   cpu id   |      offset     |
> > > +
> > > +    All CPU regs are (rw, 32-bit)
> > > +
> > > +    The offsetspecifies the offset from the "CPU interface base address" as
> > 
> > offset specifies
> > 
> > > +    defined in the GICv2 specs.  Getting or setting such a register has the
> > > +    same effect as reading or writing the register on the actual hardware.
> > > +  Limitations:
> > > +    - Priorities are not implemented, and registers are RAZ/WI
> > > +  Errors:
> > > +    - ENODEV: Getting or setting this register is not yet supported
> > > diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> > > index 629caeb..e31625c 100644
> > > --- a/virt/kvm/arm/vgic.c
> > > +++ b/virt/kvm/arm/vgic.c
> > > @@ -591,11 +591,29 @@ static bool handle_mmio_sgi_reg(struct kvm_vcpu *vcpu,
> > > 	return false;
> > > }
> > > 
> > > +static bool handle_mmio_sgi_clear(struct kvm_vcpu *vcpu,
> > > +				  struct kvm_exit_mmio *mmio,
> > > +				  phys_addr_t offset)
> > > +{
> > > +	return false;
> > > +}
> > > +
> > > +static bool handle_mmio_sgi_set(struct kvm_vcpu *vcpu,
> > > +				struct kvm_exit_mmio *mmio,
> > > +				phys_addr_t offset)
> > > +{
> > > +	return false;
> > > +}
> > > +
> > > /*
> > >  * I would have liked to use the kvm_bus_io_*() API instead, but it
> > >  * cannot cope with banked registers (only the VM pointer is passed
> > >  * around, and we need the vcpu). One of these days, someone please
> > >  * fix it!
> > > + *
> > > + * Note that the handle_mmio implementations should not use the phys_addr
> > > + * field from the kvm_exit_mmio struct as this will not have any sane values
> > > + * when used to save/restore state from user space.
> > >  */
> > > struct mmio_range {
> > > 	phys_addr_t base;
> > > @@ -665,6 +683,16 @@ static const struct mmio_range vgic_dist_ranges[] = {
> > > 		.len		= 4,
> > > 		.handle_mmio	= handle_mmio_sgi_reg,
> > > 	},
> > > +	{
> > > +		.base		= GIC_DIST_SGI_CLEAR,
> > > +		.len		= VGIC_NR_SGIS,
> > > +		.handle_mmio	= handle_mmio_sgi_clear,
> > > +	},
> > > +	{
> > > +		.base		= GIC_DIST_SGI_SET,
> > > +		.len		= VGIC_NR_SGIS,
> > > +		.handle_mmio	= handle_mmio_sgi_set,
> > > +	},
> > > 	{}
> > > };
> > > 
> > > @@ -1543,6 +1571,80 @@ int kvm_vgic_addr(struct kvm *kvm, unsigned long type, u64 *addr, bool write)
> > > 	return r;
> > > }
> > > 
> > > +static bool handle_cpu_mmio_misc(struct kvm_vcpu *vcpu,
> > > +				 struct kvm_exit_mmio *mmio, phys_addr_t offset)
> > > +{
> > > +	return true;
> > > +}
> > > +
> > > +static const struct mmio_range vgic_cpu_ranges[] = {
> > > +	{
> > > +		.base		= GIC_CPU_CTRL,
> > > +		.len		= 12,
> > > +		.handle_mmio	= handle_cpu_mmio_misc,
> > > +	},
> > > +	{
> > > +		.base		= GIC_CPU_ALIAS_BINPOINT,
> > > +		.len		= 4,
> > > +		.handle_mmio	= handle_cpu_mmio_misc,
> > > +	},
> > > +	{
> > > +		.base		= GIC_CPU_ACTIVEPRIO,
> > > +		.len		= 16,
> > > +		.handle_mmio	= handle_cpu_mmio_misc,
> > > +	},
> > > +	{
> > > +		.base		= GIC_CPU_IDENT,
> > > +		.len		= 4,
> > > +		.handle_mmio	= handle_cpu_mmio_misc,
> > > +	},
> > > +};
> > > +
> > > +static struct kvm_exit_mmio dev_attr_mmio = { .len = 4 };
> > > +
> > > +static int vgic_attr_regs_access(struct kvm_device *dev,
> > > +				 struct kvm_device_attr *attr,
> > > +				 u32 *reg, bool is_write)
> > > +{
> > > +	const struct mmio_range *r = NULL;
> > > +	phys_addr_t offset;
> > > +	int cpuid;
> > > +	struct kvm_vcpu *vcpu;
> > > +	struct kvm_exit_mmio mmio;
> > > +
> > > +	offset = attr->attr & KVM_DEV_ARM_VGIC_OFFSET_MASK;
> > > +	cpuid = (attr->attr & KVM_DEV_ARM_VGIC_CPUID_MASK) >>
> > > +		KVM_DEV_ARM_VGIC_CPUID_SHIFT;
> > > +
> > > +	if (cpuid >= atomic_read(&dev->kvm->online_vcpus))
> > > +		return -EINVAL;
> > > +
> > > +	vcpu = kvm_get_vcpu(dev->kvm, cpuid);
> > > +
> > > +	mmio.len = 4;
> > > +	mmio.is_write = is_write;
> > > +	if (is_write)
> > > +		memcpy(mmio.data, reg, sizeof(*reg));
> > 
> > Is this endianness safe?
> > 
> With a big-endian kernel, no.  But I suspect that breaks KVM elsewhere
> too.  However, this is actually nicer:
> 
> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> index ea7fb5c..191ff9f 100644
> --- a/virt/kvm/arm/vgic.c
> +++ b/virt/kvm/arm/vgic.c
> @@ -1622,7 +1622,7 @@ static int vgic_attr_regs_access(struct kvm_device *dev,
>  	mmio.len = 4;
>  	mmio.is_write = is_write;
>  	if (is_write)
> -		memcpy(mmio.data, reg, sizeof(*reg));
> +		mmio_data_write(mmio, ~0, *reg);

ahem, that's &mmio

>  
>  	if (attr->group == KVM_DEV_ARM_VGIC_GRP_DIST_REGS)
>  		r = find_matching_range(vgic_dist_ranges, &mmio, offset);
> @@ -1638,7 +1638,7 @@ static int vgic_attr_regs_access(struct kvm_device *dev,
>  	spin_unlock(&vcpu->kvm->arch.vgic.lock);
>  
>  	if (!is_write)
> -		memcpy(reg, mmio.data, sizeof(*reg));
> +		*reg = mmio_data_read(mmio, ~0);

ahem, that's &mmio

>  
>  	return 0;
>  }
> 
> Thanks,
> -Christoffer
diff mbox

Patch

diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index ea7fb5c..191ff9f 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -1622,7 +1622,7 @@  static int vgic_attr_regs_access(struct kvm_device *dev,
 	mmio.len = 4;
 	mmio.is_write = is_write;
 	if (is_write)
-		memcpy(mmio.data, reg, sizeof(*reg));
+		mmio_data_write(mmio, ~0, *reg);
 
 	if (attr->group == KVM_DEV_ARM_VGIC_GRP_DIST_REGS)
 		r = find_matching_range(vgic_dist_ranges, &mmio, offset);
@@ -1638,7 +1638,7 @@  static int vgic_attr_regs_access(struct kvm_device *dev,
 	spin_unlock(&vcpu->kvm->arch.vgic.lock);
 
 	if (!is_write)
-		memcpy(reg, mmio.data, sizeof(*reg));
+		*reg = mmio_data_read(mmio, ~0);
 
 	return 0;
 }