diff mbox series

[2/3] can: m_can: m_can_platform: Add support for enabling transceiver through the STB line

Message ID 20200122080310.24653-3-faiz_abbas@ti.com
State New
Headers show
Series [1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios | expand

Commit Message

Faiz Abbas Jan. 22, 2020, 8:03 a.m. UTC 
CAN transceivers on some boards have an STB (standby) line which can be
toggled to enable/disable the transceiver. Add support for enabling the
transceiver using a GPIO connected to the STB line.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
 drivers/net/can/m_can/m_can_platform.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
index 38ea5e600fb8..b4e1423bd5d8 100644
--- a/drivers/net/can/m_can/m_can_platform.c
+++ b/drivers/net/can/m_can/m_can_platform.c
@@ -6,6 +6,7 @@ 
 // Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
 
 #include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
 
 #include "m_can.h"
 
@@ -57,6 +58,7 @@  static int m_can_plat_probe(struct platform_device *pdev)
 {
 	struct m_can_classdev *mcan_class;
 	struct m_can_plat_priv *priv;
+	struct gpio_desc *stb;
 	struct resource *res;
 	void __iomem *addr;
 	void __iomem *mram_addr;
@@ -111,6 +113,16 @@  static int m_can_plat_probe(struct platform_device *pdev)
 
 	m_can_init_ram(mcan_class);
 
+	stb = devm_gpiod_get_optional(&pdev->dev, "stb", GPIOD_OUT_HIGH);
+	if (IS_ERR(stb)) {
+		ret = PTR_ERR(stb);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"gpio request failed, ret %d\n", ret);
+
+		goto failed_ret;
+	}
+
 	ret = m_can_class_register(mcan_class);
 
 failed_ret: