@@ -9,6 +9,8 @@ dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb
dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-ds418.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1319-pymparticle.dtb
+
dtb-$(CONFIG_ARCH_REALTEK) += rtd1395-bpi-m4.dtb
dtb-$(CONFIG_ARCH_REALTEK) += rtd1395-lionskin.dtb
new file mode 100644
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ */
+
+/dts-v1/;
+
+#include "rtd1319.dtsi"
+
+/ {
+ compatible = "realtek,pymparticle", "realtek,rtd1319";
+ model = "Realtek PymParticle EVB";
+
+ memory@2e000 {
+ device_type = "memory";
+ reg = <0x2e000 0x3ffd2000>; /* boot ROM to 1 GiB or 2 GiB */
+ };
+
+ chosen {
+ stdout-path = "serial0:460800n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+};
+
+/* debug console (J1) */
+&uart0 {
+ status = "okay";
+};
+
+/* M.2 slot (CON8) */
+&uart1 {
+ status = "disabled";
+};
+
+/* GPIO connector (T1) */
+&uart2 {
+ status = "disabled";
+};
new file mode 100644
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1319 SoC
+ *
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ */
+
+#include "rtd13xx.dtsi"
+
+/ {
+ compatible = "realtek,rtd1319";
+};
new file mode 100644
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD13xx SoC family
+ *
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ */
+
+/memreserve/ 0x0000000000000000 0x000000000002e000; /* Boot ROM */
+/memreserve/ 0x000000000002e000 0x0000000000100000; /* Boot loader */
+/memreserve/ 0x000000000f400000 0x0000000000500000; /* Video FW */
+/memreserve/ 0x000000000f900000 0x0000000000500000; /* Audio FW */
+/memreserve/ 0x0000000010000000 0x0000000000014000; /* Audio FW RAM */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ rpc_comm: rpc@3f000 {
+ reg = <0x3f000 0x1000>;
+ };
+
+ rpc_ringbuf: rpc@1ffe000 {
+ reg = <0x1ffe000 0x4000>;
+ };
+
+ tee: tee@10100000 {
+ reg = <0x10100000 0xf00000>;
+ no-map;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x200>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x300>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ arm_pmu: pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ osc27M: osc {
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ clock-output-names = "osc27M";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x00000000 0x0002e000>, /* boot ROM */
+ <0xff100000 0xff100000 0x00200000>, /* GIC */
+ <0x98000000 0x98000000 0x00200000>; /* rbus */
+
+ rbus: bus@98000000 {
+ compatible = "simple-bus";
+ reg = <0x98000000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x98000000 0x200000>;
+
+ crt: syscon@0 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+ };
+
+ iso: syscon@7000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x7000 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7000 0x1000>;
+ };
+
+ sb2: syscon@1a000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1a000 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1a000 0x1000>;
+ };
+
+ misc: syscon@1b000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1b000 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1b000 0x1000>;
+ };
+
+ scpu_wrapper: syscon@1d000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1d000 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1d000 0x1000>;
+ };
+ };
+
+ gic: interrupt-controller@ff100000 {
+ compatible = "arm,gic-v3";
+ reg = <0xff100000 0x10000>,
+ <0xff140000 0x80000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+};
+
+&iso {
+ uart0: serial0@800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x800 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <432000000>;
+ status = "disabled";
+ };
+};
+
+&misc {
+ uart1: serial1@200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x200 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <432000000>;
+ status = "disabled";
+ };
+
+ uart2: serial2@400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x400 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <432000000>;
+ status = "disabled";
+ };
+};
Add Device Trees for Realtek RTD1319 SoC family, RTD1319 SoC and Realtek PymParticle EVB. Signed-off-by: James Tai <james.tai@realtek.com> --- v2 -> v3: * Add virtual maintenance interrupt for architecture timer * Correct the GIC redistributor address range v1 -> v2: * Reserve the boot ROM address * Reserve boot loader address * Reserve audio/video FW address * Reserve RPC and ring buffer address * Reserve TEE address * Support 1 GiB RAM by default * Reduce rbus range to 2 MiB * Apply the syscon for ISO,MISC,CRT,SB2,SCPU_WRAPPER * Adjust compatible strings order in document arch/arm64/boot/dts/realtek/Makefile | 2 + .../boot/dts/realtek/rtd1319-pymparticle.dts | 43 ++++ arch/arm64/boot/dts/realtek/rtd1319.dtsi | 12 + arch/arm64/boot/dts/realtek/rtd13xx.dtsi | 213 ++++++++++++++++++ 4 files changed, 270 insertions(+) create mode 100644 arch/arm64/boot/dts/realtek/rtd1319-pymparticle.dts create mode 100644 arch/arm64/boot/dts/realtek/rtd1319.dtsi create mode 100644 arch/arm64/boot/dts/realtek/rtd13xx.dtsi