@@ -42,14 +42,14 @@ aliases {
dpi0 = &dpi0;
dsi0 = &dsi0;
dsi1 = &dsi1;
- mdp_rdma0 = &mdp_rdma0;
- mdp_rdma1 = &mdp_rdma1;
- mdp_rsz0 = &mdp_rsz0;
- mdp_rsz1 = &mdp_rsz1;
- mdp_rsz2 = &mdp_rsz2;
- mdp_wdma0 = &mdp_wdma0;
- mdp_wrot0 = &mdp_wrot0;
- mdp_wrot1 = &mdp_wrot1;
+ mdp-rdma0 = &mdp_rdma0;
+ mdp-rdma1 = &mdp_rdma1;
+ mdp-rsz0 = &mdp_rsz0;
+ mdp-rsz1 = &mdp_rsz1;
+ mdp-rsz2 = &mdp_rsz2;
+ mdp-wdma0 = &mdp_wdma0;
+ mdp-wrot0 = &mdp_wrot0;
+ mdp-wrot1 = &mdp_wrot1;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -246,21 +246,21 @@ psci {
cpu_on = <0x84000003>;
};
- clk26m: oscillator@0 {
+ clk26m: oscillator0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
clock-output-names = "clk26m";
};
- clk32k: oscillator@1 {
+ clk32k: oscillator1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32000>;
clock-output-names = "clk32k";
};
- cpum_ck: oscillator@2 {
+ cpum_ck: oscillator2 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
@@ -276,19 +276,19 @@ cpu_thermal: cpu_thermal {
sustainable-power = <1500>; /* milliwatts */
trips {
- threshold: trip-point@0 {
+ threshold: trip-point0 {
temperature = <68000>;
hysteresis = <2000>;
type = "passive";
};
- target: trip-point@1 {
+ target: trip-point1 {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit: cpu_crit@0 {
+ cpu_crit: cpu_crit0 {
temperature = <115000>;
hysteresis = <2000>;
type = "critical";
@@ -296,13 +296,13 @@ cpu_crit: cpu_crit@0 {
};
cooling-maps {
- map@0 {
+ map0 {
trip = <&target>;
cooling-device = <&cpu0 0 0>,
<&cpu1 0 0>;
contribution = <3072>;
};
- map@1 {
+ map1 {
trip = <&target>;
cooling-device = <&cpu2 0 0>,
<&cpu3 0 0>;
@@ -316,7 +316,7 @@ reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
- vpu_dma_reserved: vpu_dma_mem_region {
+ vpu_dma_reserved: vpu_dma_mem_region@b7000000 {
compatible = "shared-dma-pool";
reg = <0 0xb7000000 0 0x500000>;
alignment = <0x1000>;
@@ -368,7 +368,7 @@ syscfg_pctl_a: syscfg_pctl_a@10005000 {
reg = <0 0x10005000 0 0x1000>;
};
- pio: pinctrl@10005000 {
+ pio: pinctrl@1000b000 {
compatible = "mediatek,mt8173-pinctrl";
reg = <0 0x1000b000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl_a>;
@@ -575,7 +575,7 @@ mipi_tx1: mipi-dphy@10216000 {
status = "disabled";
};
- gic: interrupt-controller@10220000 {
+ gic: interrupt-controller@10221000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
Fixing several unit name warnings: Warning (unit_address_vs_reg): /oscillator@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /oscillator@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /oscillator@2: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/cpu_crit@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /reserved-memory/vpu_dma_mem_region: node has a reg or ranges property, but no unit name Warning (simple_bus_reg): /soc/pinctrl@10005000: simple-bus unit address format error, expected "1000b000" Warning (simple_bus_reg): /soc/interrupt-controller@10220000: simple-bus unit address format error, expected "10221000" Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-' Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 38 ++++++++++++------------ 1 file changed, 19 insertions(+), 19 deletions(-)