diff mbox series

[v2,4/6] dt-bindings: rockchip: Add DesignWare based PCIe controller

Message ID 1581574091-240890-5-git-send-email-shawn.lin@rock-chips.com
State New
Headers show
Series Add Rockchip new PCIe controller and combo phy support | expand

Commit Message

Shawn Lin Feb. 13, 2020, 6:08 a.m. UTC
From: Simon Xue <xxm@rock-chips.com>

Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

---

Changes in v2:
- fix yaml format

 .../devicetree/bindings/pci/rockchip-dw-pcie.yaml  | 148 +++++++++++++++++++++
 1 file changed, 148 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
new file mode 100644
index 0000000..527c770
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -0,0 +1,148 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare based PCIe RC controller on Rockchip SoCs
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+  - Simon Xue <xxm@rock-chips.com>
+
+# We need a select here so we don't match all nodes with 'snps,dw-pcie'
+select:
+  properties:
+    compatible:
+      contains:
+        const: rockchip,rk1808-pcie
+  required:
+    - compatible
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk1808-pcie
+      - snps,dw-pcie
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: High speed clock for PCIe
+      - description: Low speed clock for PCIe
+      - description: AHB clock for PCIe
+      - description: APB clock for PCIe
+      - description: Auxiliary clock for PCIe
+
+  clock-names:
+    items:
+      - const: hsclk
+      - const: lsclk
+      - const: aclk
+      - const: pclk
+      - const: sclk-aux
+
+  resets:
+    items:
+      - description: PCIe niu high reset line
+      - description: PCIe niu low reset line
+      - description: PCIe grf reset line
+      - description: PCIe control reset line
+      - description: PCIe control powerup reset line
+      - description: PCIe control master reset line
+      - description: PCIe control slave reset line
+      - description: PCIe control dbi reset line
+      - description: PCIe control button reset line
+      - description: PCIe control power engine reset line
+      - description: PCIe control core reset line
+      - description: PCIe control non-sticky reset line
+      - description: PCIe control sticky reset line
+      - description: PCIe control power reset line
+      - description: PCIe niu ahb reset line
+      - description: PCIe niu apb reset line
+
+  reset-names:
+    items:
+      - const: niu-h
+      - const: niu-l
+      - const: grf-p
+      - const: ctl-p
+      - const: ctl-powerup
+      - const: ctl-mst-a
+      - const: ctl-slv-a
+      - const: ctl-dbi-a
+      - const: ctl-button
+      - const: ctl-pe
+      - const: ctl-core
+      - const: ctl-nsticky
+      - const: ctl-sticky
+      - const: ctl-pwr
+      - const: ctl-niu-a
+      - const: ctl-niu-p
+
+  rockchip,usbpciegrf:
+    enum:
+      - rockchip,usbpciegrf
+    description: The grf for COMBPHY configuration and state registers.
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - clocks
+  - clock-names
+  - msi-map
+  - num-lanes
+  - phys
+  - phy-names
+  - ranges
+  - resets
+  - reset-names
+  - rockchip,usbpciegrf
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie0: pcie@fc400000 {
+      compatible = "rockchip,rk1808-pcie", "snps,dw-pcie";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      bus-range = <0x0 0x1f>;
+      reg = <0x0 0xfc000000 0x0 0x400000>,
+            <0x0 0xfc400000 0x0 0x10000>;
+      clocks = <&cru HSCLK_PCIE>, <&cru LSCLK_PCIE>,
+               <&cru ACLK_PCIE>, <&cru PCLK_PCIE>,
+               <&cru SCLK_PCIE_AUX>;
+      clock-names = "hsclk", "lsclk",
+                    "aclk", "pclk",
+                    "sclk-aux";
+      msi-map = <0x0 &its 0x0 0x1000>;
+      num-lanes = <2>;
+      phys = <&combphy PHY_TYPE_PCIE>;
+      phy-names = "pcie-phy";
+      ranges = <0x00000800 0x0 0xf8000000 0x0 0xf8000000 0x0 0x800000
+                0x83000000 0x0 0xf8800000 0x0 0xf8800000 0x0 0x3700000
+                0x81000000 0x0 0xfbf00000 0x0 0xfbf00000 0x0 0x100000>;
+      resets = <&cru SRST_PCIE_NIU_H>, <&cru SRST_PCIE_NIU_L>,
+               <&cru SRST_PCIEGRF_P>, <&cru SRST_PCIECTL_P>,
+               <&cru SRST_PCIECTL_POWERUP>, <&cru SRST_PCIECTL_MST_A>,
+               <&cru SRST_PCIECTL_SLV_A>, <&cru SRST_PCIECTL_DBI_A>,
+               <&cru SRST_PCIECTL_BUTTON>, <&cru SRST_PCIECTL_PE>,
+               <&cru SRST_PCIECTL_CORE>, <&cru SRST_PCIECTL_NSTICKY>,
+               <&cru SRST_PCIECTL_STICKY>, <&cru SRST_PCIECTL_PWR>,
+               <&cru SRST_PCIE_NIU_A>, <&cru SRST_PCIE_NIU_P>;
+      reset-names = "niu-h", "niu-l", "grf-p", "ctl-p",
+                    "ctl-powerup", "ctl-mst-a", "ctl-slv-a",
+                    "ctl-dbi-a", "ctl-button", "ctl-pe",
+                    "ctl-core", "ctl-nsticky", "ctl-sticky",
+                    "ctl-pwr", "ctl-niu-a", "ctl-niu-p";
+      rockchip,usbpciegrf = <&usb_pcie_grf>;
+      reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+    };
+
+...