diff mbox series

[v2,net-next/devicetree,5/5] arm64: dts: fsl: ls1028a: enable switch PHYs on RDB

Message ID 20200219151259.14273-6-olteanv@gmail.com
State New
Headers show
Series [v2,net-next/devicetree,1/5] arm64: dts: fsl: ls1028a: delete extraneous #interrupt-cells for ENETC RCIE | expand

Commit Message

Vladimir Oltean Feb. 19, 2020, 3:12 p.m. UTC 
From: Claudiu Manoil <claudiu.manoil@nxp.com>

Link the switch PHY nodes to the central MDIO controller PCIe endpoint
node on LS1028A (implemented as PF3) so that PHYs are accessible via
MDIO.

Enable SGMII AN on the Felix PCS by telling PHYLINK that the VSC8514
quad PHY is capable of in-band-status.

The PHYs are used in poll mode due to an issue with the interrupt line
on current revisions of the LS1028A-RDB board.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
Changes in v2:
None.

 .../boot/dts/freescale/fsl-ls1028a-rdb.dts    | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index afb55653850d..9353c00e46a7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -194,6 +194,57 @@ 
 	status = "disabled";
 };
 
+&enetc_mdio_pf3 {
+	/* VSC8514 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy@10 {
+		reg = <0x10>;
+	};
+
+	qsgmii_phy1: ethernet-phy@11 {
+		reg = <0x11>;
+	};
+
+	qsgmii_phy2: ethernet-phy@12 {
+		reg = <0x12>;
+	};
+
+	qsgmii_phy3: ethernet-phy@13 {
+		reg = <0x13>;
+	};
+};
+
+&mscc_felix_port0 {
+	status = "okay";
+	label = "swp0";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy0>;
+	phy-mode = "qsgmii";
+};
+
+&mscc_felix_port1 {
+	status = "okay";
+	label = "swp1";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy1>;
+	phy-mode = "qsgmii";
+};
+
+&mscc_felix_port2 {
+	status = "okay";
+	label = "swp2";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy2>;
+	phy-mode = "qsgmii";
+};
+
+&mscc_felix_port3 {
+	status = "okay";
+	label = "swp3";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy3>;
+	phy-mode = "qsgmii";
+};
+
 &sai4 {
 	status = "okay";
 };