@@ -27,7 +27,7 @@ Required properties of NAND chips:
- reg: shall contain the native Chip Select ids from 0 to max supported by
the cadence nand flash controller
-See Documentation/devicetree/bindings/mtd/nand.txt for more details on
+See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on
generic bindings.
Example:
@@ -45,7 +45,7 @@ Optional properties:
switch queue
- resets: a single phandle and reset identifier pair. See
- Documentation/devicetree/binding/reset/reset.txt for details.
+ Documentation/devicetree/bindings/reset/reset.txt for details.
- reset-names: If the "reset" property is specified, this property should have
the value "switch" to denote the switch reset line.
@@ -36,7 +36,7 @@ SAI subnodes required properties:
- clock-names: Must contain "sai_ck".
Must also contain "MCLK", if SAI shares a master clock,
with a SAI set as MCLK clock provider.
- - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
+ - dmas: see Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
- dma-names: identifier string for each DMA request line
"tx": if sai sub-block is configured as playback DAI
"rx": if sai sub-block is configured as capture DAI
@@ -10,7 +10,7 @@ Required properties:
- clock-names: must contain "kclk"
- interrupts: cpu DAI interrupt line
- dmas: DMA specifiers for audio data DMA and iec control flow DMA
- See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt
+ See STM32 DMA bindings, Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
- dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
Optional properties:
@@ -49,7 +49,7 @@ properties:
dmas:
description: |
DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
- the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32-dma.txt.
+ the STM32 DMA bindings Documentation/devicetree/bindings/dma/st,stm32-dma.yaml.
items:
- description: rx DMA channel
- description: tx DMA channel
@@ -4480,7 +4480,7 @@ L: linux-media@vger.kernel.org
T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/platform/sunxi/sun6i-csi/
-F: Documentation/devicetree/bindings/media/sun6i-csi.txt
+F: Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
CW1200 WLAN driver
M: Solomon Peachy <pizza@shaftnet.org>
@@ -15955,7 +15955,7 @@ F: drivers/*/stm32-*timer*
F: drivers/pwm/pwm-stm32*
F: include/linux/*/stm32-*tim*
F: Documentation/ABI/testing/*timer-stm32
-F: Documentation/devicetree/bindings/*/stm32-*timer*
+F: Documentation/devicetree/bindings/*/*stm32-*timer*
F: Documentation/devicetree/bindings/pwm/pwm-stm32*
STMMAC ETHERNET DRIVER
@@ -94,5 +94,5 @@ Some properties are recognized either by SPI and SDIO versions:
Must contains 64 hexadecimal digits. Not supported in current version.
WFx driver also supports `mac-address` and `local-mac-address` as described in
-Documentation/devicetree/binding/net/ethernet.txt
+Documentation/devicetree/bindings/net/ethernet.txt
There are several DT doc references that require manual fixes. I found 3 cases fixed on this patch: - directory named "binding/" instead of "bindings/"; - .txt to .yaml renames; - file renames (still on txt format); Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- .../devicetree/bindings/mtd/cadence-nand-controller.txt | 2 +- .../devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt | 2 +- Documentation/devicetree/bindings/sound/st,stm32-sai.txt | 2 +- Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt | 2 +- Documentation/devicetree/bindings/spi/st,stm32-spi.yaml | 2 +- MAINTAINERS | 4 ++-- .../devicetree/bindings/net/wireless/siliabs,wfx.txt | 2 +- 7 files changed, 8 insertions(+), 8 deletions(-)