deleted file mode 100644
@@ -1,17 +0,0 @@
-Device Tree Clock bindings for Calxeda highbank platform
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
- "calxeda,hb-pll-clock" - for a PLL clock
- "calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the
- A9 clock.
- "calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock.
- "calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller.
-- reg : shall be the control register offset from SYSREGs base for the clock.
-- clocks : shall be the input parent clock phandle for the clock. This is
- either an oscillator or a pll output.
-- #clock-cells : from common clock binding; shall be set to 0.
new file mode 100644
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/calxeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device Tree Clock bindings for Calxeda highbank platform
+
+description: |
+ This binding covers the Calxeda SoC internal peripheral and bus clocks
+ as used by peripherals. The clocks live inside the "system register"
+ region of the SoC, so are typically presented as children of an
+ "hb-sregs" node.
+
+maintainers:
+ - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - calxeda,hb-pll-clock
+ - calxeda,hb-a9periph-clock
+ - calxeda,hb-a9bus-clock
+ - calxeda,hb-emmc-clock
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - clocks
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ sregs@3fffc000 {
+ compatible = "calxeda,hb-sregs";
+ reg = <0x3fffc000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <33333000>;
+ };
+
+ ddrpll: ddrpll {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-pll-clock";
+ clocks = <&osc>;
+ reg = <0x108>;
+ };
+
+ a9pll: a9pll {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-pll-clock";
+ clocks = <&osc>;
+ reg = <0x100>;
+ };
+
+ a9periphclk: a9periphclk {
+ #clock-cells = <0>;
+ compatible = "calxeda,hb-a9periph-clock";
+ clocks = <&a9pll>;
+ reg = <0x104>;
+ };
+ };
+ };
+
+...
Convert the Calxeda clock bindings to DT schema format using json-schema. This just covers the actual PLL and divider clock nodes. In the actual DTs they are somewhat unconnected (no ranges or bus compatible) children of the sregs node, but for the actual clock bindings this is not relevant. One oddity is that the addresses are relative to the parent node, without that being pronounced using a ranges property. But this is too late to fix now. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org --- .../devicetree/bindings/clock/calxeda.txt | 17 ---- .../devicetree/bindings/clock/calxeda.yaml | 83 +++++++++++++++++++ 2 files changed, 83 insertions(+), 17 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/calxeda.txt create mode 100644 Documentation/devicetree/bindings/clock/calxeda.yaml