diff mbox series

arm64: dts: rockchip: fix cpu compatible property for rk3308

Message ID 20200228084827.16198-1-jbx6244@gmail.com
State New
Headers show
Series arm64: dts: rockchip: fix cpu compatible property for rk3308 | expand

Commit Message

Johan Jonker Feb. 28, 2020, 8:48 a.m. UTC
A test with the command below gives for example these errors:

arch/arm64/boot/dts/rockchip/rk3308-evb.dt.yaml: cpu@0: compatible:
Additional items are not allowed ('arm,armv8' was unexpected)
arch/arm64/boot/dts/rockchip/rk3308-evb.dt.yaml: cpu@0: compatible:
['arm,cortex-a35', 'arm,armv8']
is too long

Fix these errors by removing the last argument of
the cpu compatible property in rk3308.dtsi.

make ARCH=arm64
dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/arm/cpus.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3308.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index 116f1900e..3bd5bc860 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -40,7 +40,7 @@ 
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35", "arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLK>;
@@ -53,7 +53,7 @@ 
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35", "arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -63,7 +63,7 @@ 
 
 		cpu2: cpu@2 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35", "arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -73,7 +73,7 @@ 
 
 		cpu3: cpu@3 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a35", "arm,armv8";
+			compatible = "arm,cortex-a35";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			operating-points-v2 = <&cpu0_opp_table>;