@@ -35,6 +35,16 @@
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ fan: gpio-fan {
+ compatible = "gpio-fan";
+ gpio-fan,speed-map = <0 0 8600 1>;
+ gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+ #cooling-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_fan>;
+ status = "okay";
+ };
};
&A53_0 {
@@ -373,4 +383,58 @@
MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
>;
};
+
+ pinctrl_gpio_fan: gpiofanp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x01
+ >;
+ };
};
+
+&cpu_thermal {
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_alert1: trip1 {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip3 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ fan_toggle0: trip4 {
+ temperature = <65000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&A53_0 0 1>; /* Exclude highest OPP */
+ };
+
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device =
+ <&A53_0 0 2>; /* Exclude two highest OPPs */
+ };
+
+ map4 {
+ trip = <&fan_toggle0>;
+ cooling-device = <&fan 0 1>;
+ };
+ };
+};
+
@@ -198,7 +198,7 @@
};
thermal-zones {
- cpu-thermal {
+ cpu_thermal: cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tmu 0>;
It was based on Google Source Code for Coral Edge TPU Mendel release: https://coral.googlesource.com/linux-imx/ It was tested on Coral Dev Board using this command: sudo stress --cpu 4 --timeout 3600 Signed-off-by: Vitor Massaru Iha <vitor@massaru.org> --- v2: * Fix underscore in property name; * Add pinctrl entry for gpio-fan; * Removes undocumented property. BR, Vitor --- .../boot/dts/freescale/imx8mq-phanbell.dts | 64 +++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +- 2 files changed, 65 insertions(+), 1 deletion(-)