@@ -281,8 +281,6 @@
compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
reg = <0x10220000 0x4000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
clock-names = "i2s_clk", "i2s_hclk";
clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
dmas = <&pdma 0>, <&pdma 1>;
@@ -156,8 +156,6 @@
compatible = "rockchip,rk3066-i2s";
reg = <0x10118000 0x2000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
@@ -174,8 +172,6 @@
compatible = "rockchip,rk3066-i2s";
reg = <0x1011a000 0x2000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>;
@@ -192,8 +188,6 @@
compatible = "rockchip,rk3066-i2s";
reg = <0x1011c000 0x2000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>;
@@ -166,8 +166,6 @@
compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s";
reg = <0x1011a000 0x2000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
@@ -152,8 +152,6 @@
compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
reg = <0x100b0000 0x4000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
clock-names = "i2s_clk", "i2s_hclk";
clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
dmas = <&pdma 14>, <&pdma 15>;
@@ -167,8 +165,6 @@
compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
reg = <0x100c0000 0x4000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
clock-names = "i2s_clk", "i2s_hclk";
clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
dmas = <&pdma 11>, <&pdma 12>;
@@ -193,8 +189,6 @@
compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
reg = <0x100e0000 0x4000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
clock-names = "i2s_clk", "i2s_hclk";
clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
dmas = <&pdma 0>, <&pdma 1>;
@@ -962,8 +962,6 @@
reg = <0x0 0xff890000 0x0 0x10000>;
#sound-dai-cells = <0>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
clock-names = "i2s_clk", "i2s_hclk";
dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
An experimental test with the command below gives for example this error: arch/arm/boot/dts/rk3036-evb.dt.yaml: i2s@10220000: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+' '#address-cells' and '#size-cells' are not a valid property for i2s nodes, so remove them. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-i2s.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- arch/arm/boot/dts/rk3036.dtsi | 2 -- arch/arm/boot/dts/rk3066a.dtsi | 6 ------ arch/arm/boot/dts/rk3188.dtsi | 2 -- arch/arm/boot/dts/rk322x.dtsi | 6 ------ arch/arm/boot/dts/rk3288.dtsi | 2 -- 5 files changed, 18 deletions(-)