@@ -892,7 +892,6 @@
reg = <0x0 0xff350000 0x0 0x10000>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST>;
- clock-names = "usbhost";
phys = <&u2phy_host>;
phy-names = "usb";
power-domains = <&power PX30_PD_USB>;
@@ -977,7 +977,6 @@
reg = <0x0 0xff5d0000 0x0 0x10000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>, <&u2phy>;
- clock-names = "usbhost", "utmi";
phys = <&u2phy_host>;
phy-names = "usb";
status = "disabled";
@@ -360,8 +360,6 @@
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
<&u2phy0>;
- clock-names = "usbhost", "arbiter",
- "utmi";
phys = <&u2phy0_host>;
phy-names = "usb";
status = "disabled";
@@ -384,8 +382,6 @@
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
<&u2phy1>;
- clock-names = "usbhost", "arbiter",
- "utmi";
phys = <&u2phy1_host>;
phy-names = "usb";
status = "disabled";
A test with the command below gives for example this error: arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: usb@ff5d0000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+' 'clock-names' is not a valid property name for usb_host nodes with compatible string 'generic-ohci', so remove them. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ohci.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- arch/arm64/boot/dts/rockchip/px30.dtsi | 1 - arch/arm64/boot/dts/rockchip/rk3328.dtsi | 1 - arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ---- 3 files changed, 6 deletions(-)