@@ -163,6 +163,23 @@ static void qcom_geni_i2c_conf(struct geni_i2c_dev *gi2c)
writel_relaxed(val, gi2c->se.base + SE_I2C_SCL_COUNTERS);
}
+static int geni_i2c_icc_get(struct geni_se *se)
+{
+ se->icc_path_geni_to_core = devm_of_icc_get(se->dev, "qup-core");
+ if (IS_ERR(se->icc_path_geni_to_core))
+ return PTR_ERR(se->icc_path_geni_to_core);
+
+ se->icc_path_cpu_to_geni = devm_of_icc_get(se->dev, "qup-config");
+ if (IS_ERR(se->icc_path_cpu_to_geni))
+ return PTR_ERR(se->icc_path_cpu_to_geni);
+
+ se->icc_path_geni_to_ddr = devm_of_icc_get(se->dev, "qup-memory");
+ if (IS_ERR(se->icc_path_geni_to_ddr))
+ return PTR_ERR(se->icc_path_geni_to_ddr);
+
+ return 0;
+}
+
static void geni_i2c_err_misc(struct geni_i2c_dev *gi2c)
{
u32 m_cmd = readl_relaxed(gi2c->se.base + SE_GENI_M_CMD0);
@@ -563,6 +580,39 @@ static int geni_i2c_probe(struct platform_device *pdev)
gi2c->adap.dev.of_node = pdev->dev.of_node;
strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
+ ret = geni_i2c_icc_get(&gi2c->se);
+ if (ret)
+ return ret;
+ /*
+ * Set the bus quota for core and cpu to a reasonable value for
+ * register access.
+ * Set quota for DDR based on bus speed, assume peak requirement
+ * as twice of avg bw.
+ */
+ gi2c->se.avg_bw_core = Bps_to_icc(1000);
+ gi2c->se.peak_bw_core = Bps_to_icc(CORE_2X_100_MHZ);
+ gi2c->se.avg_bw_cpu = Bps_to_icc(1000);
+ gi2c->se.peak_bw_cpu = Bps_to_icc(1000);
+ gi2c->se.avg_bw_ddr = Bps_to_icc(gi2c->clk_freq_out);
+ gi2c->se.peak_bw_ddr = Bps_to_icc(2 * gi2c->clk_freq_out);
+
+ /* Vote for core clocks and CPU for register access */
+ ret = icc_set_bw(gi2c->se.icc_path_geni_to_core, gi2c->se.avg_bw_core,
+ gi2c->se.peak_bw_core);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: ICC BW voting failed for core\n",
+ __func__);
+ return ret;
+ }
+
+ ret = icc_set_bw(gi2c->se.icc_path_cpu_to_geni, gi2c->se.avg_bw_cpu,
+ gi2c->se.peak_bw_cpu);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: ICC BW voting failed for cpu\n",
+ __func__);
+ return ret;
+ }
+
ret = geni_se_resources_on(&gi2c->se);
if (ret) {
dev_err(&pdev->dev, "Error turning on resources %d\n", ret);
@@ -584,6 +634,19 @@ static int geni_i2c_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "Error turning off resources %d\n", ret);
return ret;
}
+ /* Remove vote from core clocks and CPU */
+ ret = icc_set_bw(gi2c->se.icc_path_geni_to_core, 0, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: ICC BW remove failed for core\n",
+ __func__);
+ return ret;
+ }
+
+ ret = icc_set_bw(gi2c->se.icc_path_cpu_to_geni, 0, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: ICC BW remove failed for cpu\n",
+ __func__);
+ }
dev_dbg(&pdev->dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
@@ -629,6 +692,28 @@ static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
gi2c->suspended = 1;
}
+ /* Remove BW votes */
+ ret = icc_set_bw(gi2c->se.icc_path_geni_to_core, 0, 0);
+ if (ret) {
+ dev_err_ratelimited(gi2c->se.dev, "%s: ICC BW remove failed for core\n",
+ __func__);
+ return ret;
+ }
+
+ ret = icc_set_bw(gi2c->se.icc_path_cpu_to_geni, 0, 0);
+ if (ret) {
+ dev_err_ratelimited(gi2c->se.dev, "%s: ICC BW remove failed for cpu\n",
+ __func__);
+ return ret;
+ }
+
+ ret = icc_set_bw(gi2c->se.icc_path_geni_to_ddr, 0, 0);
+ if (ret) {
+ dev_err_ratelimited(gi2c->se.dev, "%s: ICC BW remove failed for ddr\n",
+ __func__);
+ return ret;
+ }
+
return 0;
}
@@ -637,6 +722,31 @@ static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
int ret;
struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
+ /* Vote on Core, CPU and DDR path respectively */
+ ret = icc_set_bw(gi2c->se.icc_path_geni_to_core, gi2c->se.avg_bw_core,
+ gi2c->se.peak_bw_core);
+ if (ret) {
+ dev_err_ratelimited(gi2c->se.dev, "%s: ICC BW voting failed for core\n",
+ __func__);
+ return ret;
+ }
+
+ ret = icc_set_bw(gi2c->se.icc_path_cpu_to_geni, gi2c->se.avg_bw_cpu,
+ gi2c->se.peak_bw_cpu);
+ if (ret) {
+ dev_err_ratelimited(gi2c->se.dev, "%s: ICC BW voting failed for cpu\n",
+ __func__);
+ return ret;
+ }
+
+ ret = icc_set_bw(gi2c->se.icc_path_geni_to_ddr, gi2c->se.avg_bw_ddr,
+ gi2c->se.peak_bw_ddr);
+ if (ret) {
+ dev_err_ratelimited(gi2c->se.dev, "%s: ICC BW voting failed for ddr\n",
+ __func__);
+ return ret;
+ }
+
ret = geni_se_resources_on(&gi2c->se);
if (ret)
return ret;
Get the interconnect paths for I2C based Serial Engine device and vote according to the bus speed of the driver. Signed-off-by: Akash Asthana <akashast@codeaurora.org> --- Changes in V2: - As per Bjorn's comment, removed se == NULL check from geni_i2c_icc_get - As per Bjorn's comment, removed code to set se->icc_path* to NULL in failure - As per Bjorn's comment, introduced and using devm_of_icc_get API for getting path handle - As per Matthias comment, added error handling for icc_set_bw call drivers/i2c/busses/i2c-qcom-geni.c | 110 +++++++++++++++++++++++++++++++++++++ 1 file changed, 110 insertions(+)