diff mbox series

[3/6] soc: xilinx: vcu: implement clock provider for output clocks

Message ID 20200317094115.15896-4-m.tretter@pengutronix.de
State New
Headers show
Series soc: xilinx: vcu: provide interfaces for other drivers | expand

Commit Message

Michael Tretter March 17, 2020, 9:41 a.m. UTC 
The VCU System-Level Control uses an internal PLL to drive the core and
MCU clock for the allegro encoder and decoder based on an external PL
clock.

In order be able to ensure that the clocks are enabled and to get their
rate from other drivers, the module must implement a clock provider and
register the clocks at the common clock framework. Other drivers are
then able to access the clock via devicetree bindings.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
 drivers/soc/xilinx/Kconfig    |  2 +-
 drivers/soc/xilinx/xlnx_vcu.c | 69 ++++++++++++++++++++++++++++++++++-
 2 files changed, 68 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
index 223f1f9d0922..331f124902e8 100644
--- a/drivers/soc/xilinx/Kconfig
+++ b/drivers/soc/xilinx/Kconfig
@@ -3,7 +3,7 @@  menu "Xilinx SoC drivers"
 
 config XILINX_VCU
 	tristate "Xilinx VCU logicoreIP Init"
-	depends on HAS_IOMEM
+	depends on HAS_IOMEM && COMMON_CLK
 	help
 	  Provides the driver to enable and disable the isolation between the
 	  processing system and programmable logic part by using the logicoreIP
diff --git a/drivers/soc/xilinx/xlnx_vcu.c b/drivers/soc/xilinx/xlnx_vcu.c
index dcd8e7824b06..d69e671efeab 100644
--- a/drivers/soc/xilinx/xlnx_vcu.c
+++ b/drivers/soc/xilinx/xlnx_vcu.c
@@ -7,6 +7,7 @@ 
  * Contacts   Dhaval Shah <dshah@xilinx.com>
  */
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/io.h>
@@ -14,6 +15,8 @@ 
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 
+#include <dt-bindings/clock/xlnx-vcu.h>
+
 /* Address map for different registers implemented in the VCU LogiCORE IP. */
 #define VCU_ECODER_ENABLE		0x00
 #define VCU_DECODER_ENABLE		0x04
@@ -108,7 +111,9 @@  struct xvcu_device {
 	struct clk *aclk;
 	void __iomem *logicore_reg_ba;
 	void __iomem *vcu_slcr_ba;
+	struct clk_onecell_data clk_data;
 	u32 coreclk;
+	u32 mcuclk;
 };
 
 /**
@@ -375,10 +380,10 @@  static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu)
 	}
 
 	xvcu->coreclk = pll_clk / divisor_core;
-	mcuclk = pll_clk / divisor_mcu;
+	xvcu->mcuclk = pll_clk / divisor_mcu;
 	dev_dbg(xvcu->dev, "Actual Ref clock freq is %uHz\n", refclk);
 	dev_dbg(xvcu->dev, "Actual Core clock freq is %uHz\n", xvcu->coreclk);
-	dev_dbg(xvcu->dev, "Actual Mcu clock freq is %uHz\n", mcuclk);
+	dev_dbg(xvcu->dev, "Actual Mcu clock freq is %uHz\n", xvcu->mcuclk);
 
 	vcu_pll_ctrl &= ~(VCU_PLL_CTRL_FBDIV_MASK << VCU_PLL_CTRL_FBDIV_SHIFT);
 	vcu_pll_ctrl |= (found->fbdiv & VCU_PLL_CTRL_FBDIV_MASK) <<
@@ -485,6 +490,56 @@  static int xvcu_set_pll(struct xvcu_device *xvcu)
 	return -ETIMEDOUT;
 }
 
+static int xvcu_register_clock_provider(struct xvcu_device *xvcu)
+{
+	struct device *dev = xvcu->dev;
+	const char *parent_name = __clk_get_name(xvcu->pll_ref);
+	struct clk_onecell_data *data = &xvcu->clk_data;
+	struct clk **clks;
+	size_t num_clks = CLK_XVCU_MAX;
+
+	clks = devm_kcalloc(dev, num_clks, sizeof(*clks), GFP_KERNEL);
+	if (!clks)
+		return -ENOMEM;
+
+	data->clk_num = num_clks;
+	data->clks = clks;
+
+	clks[CLK_XVCU_ENC_CORE] =
+		clk_register_fixed_rate(dev, "venc_core_clk",
+					parent_name, 0, xvcu->coreclk);
+	clks[CLK_XVCU_ENC_MCU] =
+		clk_register_fixed_rate(dev, "venc_mcu_clk",
+					parent_name, 0, xvcu->mcuclk);
+	clks[CLK_XVCU_DEC_CORE] =
+		clk_register_fixed_rate(dev, "vdec_core_clk",
+					parent_name, 0, xvcu->coreclk);
+	clks[CLK_XVCU_DEC_MCU] =
+		clk_register_fixed_rate(dev, "vdec_mcu_clk",
+					parent_name, 0, xvcu->mcuclk);
+
+	return of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
+}
+
+static void xvcu_unregister_clock_provider(struct xvcu_device *xvcu)
+{
+	struct device *dev = xvcu->dev;
+
+	of_clk_del_provider(dev->of_node);
+}
+
+static void xvcu_reset(struct xvcu_device *xvcu)
+{
+	if (!xvcu->reset_gpio)
+		return;
+
+	gpiod_set_value(xvcu->reset_gpio, 0);
+	/* min 2 clock cycle of vcu pll_ref, slowest freq is 33.33KHz */
+	usleep_range(60, 120);
+	gpiod_set_value(xvcu->reset_gpio, 1);
+	usleep_range(60, 120);
+}
+
 /**
  * xvcu_probe - Probe existence of the logicoreIP
  *			and initialize PLL
@@ -569,10 +624,18 @@  static int xvcu_probe(struct platform_device *pdev)
 		goto error_pll_ref;
 	}
 
+	ret = xvcu_register_clock_provider(xvcu);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register clock provider\n");
+		goto error_clk_provider;
+	}
+
 	dev_set_drvdata(&pdev->dev, xvcu);
 
 	return 0;
 
+error_clk_provider:
+	xvcu_unregister_clock_provider(xvcu);
 error_pll_ref:
 	clk_disable_unprepare(xvcu->pll_ref);
 error_aclk:
@@ -596,6 +659,8 @@  static int xvcu_remove(struct platform_device *pdev)
 	if (!xvcu)
 		return -ENODEV;
 
+	xvcu_unregister_clock_provider(xvcu);
+
 	/* Add the the Gasket isolation and put the VCU in reset. */
 	xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0);