diff mbox series

[v1,1/1] checks: mask flags bit when check i2c addr

Message ID 20200326054345.9806-1-rayagonda.kokatanur@broadcom.com
State New
Headers show
Series [v1,1/1] checks: mask flags bit when check i2c addr | expand

Commit Message

Rayagonda Kokatanur March 26, 2020, 5:43 a.m. UTC 
Generally i2c addr should not be greater than 10-bit.
The highest bytes are used for other purpose, for ex 2 bits
are used for I2C_TEN_BIT_ADDRESS and I2C_OWN_SLAVE_ADDRESS.
Hence mask upper bytes if check slave addr valid.

Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
---
 checks.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/checks.c b/checks.c
index 8acbc05..5c7f2b1 100644
--- a/checks.c
+++ b/checks.c
@@ -1051,6 +1051,12 @@  static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
 
 	for (len = prop->val.len; len > 0; len -= 4) {
 		reg = fdt32_to_cpu(*(cells++));
+		/*
+		 * The highest bytes are used for other purpose, for ex 2 bits
+		 * are used for I2C_TEN_BIT_ADDRESS and I2C_OWN_SLAVE_ADDRESS.
+		 * Hence mask upper bytes if check slave addr valid.
+		 */
+		reg &= ~0xFF000000;
 		if (reg > 0x3ff)
 			FAIL_PROP(c, dti, node, prop, "I2C address must be less than 10-bits, got \"0x%x\"",
 				  reg);