| Message ID | 20200423111015.1.Ifa8039b6f3031e9a69c4a526a6efc2f499f07292@changeid |
|---|---|
| State | New |
| Headers | show |
| Series | dt-bindings: phy: qcom-qusb2: Fix defaults | expand |
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index 144ae29e7141..f8bd28ff31c1 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -97,7 +97,7 @@ then: - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 maximum: 63 - default: 0 + default: 32 qcom,charge-ctrl-value: description: @@ -130,7 +130,7 @@ then: - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 maximum: 3 - default: 2 + default: 0 qcom,preemphasis-width: description: @@ -152,7 +152,7 @@ then: - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 maximum: 3 - default: 0 + default: 1 required: - compatible
The defaults listed in the bindings don't match what the code is actually doing. Presumably existing users care more about keeping existing behavior the same, so change the bindings to match the code in Linux. The "qcom,preemphasis-level" default has been wrong for quite a long time (May 2018). The other two were recently added. As some evidence that these values are wrong, this is from the Linux driver: - qcom,preemphasis-level: sets "PORT_TUNE1", lower 2 bits. Driver programs PORT_TUNE1 to 0x30 by default and (0x30 & 0x3) = 0. - qcom,bias-ctrl-value: sets "PLL_BIAS_CONTROL_2", lower 6 bits. Driver programs PLL_BIAS_CONTROL_2 to 0x20 by default and (0x20 & 0x3f) = 0x20 = 32. - qcom,hsdisc-trim-value: sets "PORT_TUNE2", lower 2 bits. Driver programs PORT_TUNE2 to 0x29 by default and (0x29 & 0x3) = 1. Fixes: 1e6f134eb67a ("dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters") Fixes: a8b70ccf10e3 ("dt-bindings: phy-qcom-usb2: Add support to override tuning values") Signed-off-by: Douglas Anderson <dianders@chromium.org> --- Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)