diff mbox series

ARM: dts: gw552x: add USB OTG support

Message ID 1587748215-9587-1-git-send-email-tharvey@gateworks.com
State New
Headers show
Series ARM: dts: gw552x: add USB OTG support | expand

Commit Message

Tim Harvey April 24, 2020, 5:10 p.m. UTC 
The GW552x-B board revision adds USB OTG support.

Enable the device-tree node and configure the OTG_ID pin.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
 arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index dc646b7..133a1e3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -12,8 +12,6 @@ 
 		led1 = &led1;
 		led2 = &led2;
 		nand = &gpmi;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
 	};
 
 	chosen {
@@ -258,6 +256,14 @@ 
 	status = "okay";
 };
 
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
 &wdog1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog>;
@@ -359,6 +365,12 @@ 
 		>;
 	};
 
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x13059
+		>;
+	};
+
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0