diff mbox series

[v2,7/7] mfd: madera: Move binding over to dtschema

Message ID 20200506155758.14643-7-ckeepax@opensource.cirrus.com
State New
Headers show
Series [v2,1/7] regulator: arizona-regulator: Move binding over to dtschema | expand

Commit Message

Charles Keepax May 6, 2020, 3:57 p.m. UTC
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---

New since v1, putting in the same series as Arizona since they share the
same regulator binding.

Thanks,
Charles

 .../devicetree/bindings/mfd/cirrus,madera.yaml     | 317 +++++++++++++++++++++
 Documentation/devicetree/bindings/mfd/madera.txt   | 114 --------
 MAINTAINERS                                        |   6 +-
 3 files changed, 320 insertions(+), 117 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
 delete mode 100644 Documentation/devicetree/bindings/mfd/madera.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
new file mode 100644
index 0000000000000..37e76505da84a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
@@ -0,0 +1,317 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/cirrus,madera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Madera class audio CODECs Multi-Functional Device
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  These devices are audio SoCs with extensive digital capabilities and a range
+  of analogue I/O.
+
+  See also the child driver bindings in:
+
+    bindings/pinctrl/cirrus,madera.yaml
+    bindings/regulator/wlf,arizona.yaml
+    bindings/sound/cirrus,madera.yaml
+
+allOf:
+  - $ref: /schemas/pinctrl/cirrus,madera.yaml#
+  - $ref: /schemas/regulator/wlf,arizona.yaml#
+  - $ref: /schemas/sound/cirrus,madera.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l85
+              - wlf,wm1840
+    then:
+      properties:
+        SPKVDDL-supply:
+          description:
+            Left speaker driver power supply.
+          $ref: /schemas/types.yaml#/definitions/phandle
+
+        SPKVDDR-supply:
+          description:
+            Right speaker driver power supply.
+          $ref: /schemas/types.yaml#/definitions/phandle
+
+      required:
+        - SPKVDDL-supply
+        - SPKVDDR-supply
+    else:
+      required:
+        - DCVDD-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l15
+              - cirrus,cs47l35
+    then:
+      properties:
+        SPKVDD-supply:
+          description:
+            Mono speaker driver power supply.
+          $ref: /schemas/types.yaml#/definitions/phandle
+
+      required:
+        - SPKVDD-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l35
+              - cirrus,cs47l85
+              - cirrus,cs47l90
+              - cirrus,cs47l91
+              - wlf,wm1840
+    then:
+      properties:
+        DBVDD2-supply:
+          description:
+            Databus power supply.
+          $ref: /schemas/types.yaml#/definitions/phandle
+
+      required:
+        - DBVDD2-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l85
+              - cirrus,cs47l90
+              - cirrus,cs47l91
+              - wlf,wm1840
+    then:
+      properties:
+        DBVDD3-supply:
+          description:
+            Databus power supply.
+          $ref: /schemas/types.yaml#/definitions/phandle
+
+        DBVDD4-supply:
+          description:
+            Databus power supply.
+          $ref: /schemas/types.yaml#/definitions/phandle
+  - if:
+     properties:
+       compatible:
+         contains:
+           enum:
+             - cirrus,cs47l15
+    then:
+      required:
+        - MICVDD-supply
+    else:
+      properties:
+        CPVDD2-supply:
+          description:
+            Secondary charge pump power supply.
+          $ref: /schemas/types.yaml#/definitions/phandle
+
+      required:
+        - CPVDD2-supply
+
+properties:
+  compatible:
+    contains:
+      enum:
+        - cirrus,cs47l15
+        - cirrus,cs47l35
+        - cirrus,cs47l85
+        - cirrus,cs47l90
+        - cirrus,cs47l91
+        - cirrus,cs42l92
+        - cirrus,cs47l92
+        - cirrus,cs47l93
+        - cirrus,wm1840
+
+  reg:
+    maxItems: 1
+
+  gpio-controller:
+    description:
+      Indicates this device is a GPIO controller.
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number. The second cell is reserved for
+      future use and must be zero
+    const: 2
+
+  interrupt-controller:
+    description:
+      Indicates that this device is an interrupt controller.
+
+  '#interrupt-cells':
+    description:
+      The first cell is the IRQ number.
+      The second cell is the flags, encoded as the trigger masks from
+      bindings/interrupt-controller/interrupts.txt
+    const: 2
+
+  interrupts:
+    description:
+      The interrupt line the /IRQ signal for the device is connected to.
+
+  reset-gpios:
+    description:
+      One entry specifying the GPIO controlling /RESET.  As defined in
+      bindings/gpio.txt.  Although optional, it is strongly recommended
+      to use a hardware reset.
+    maxItems: 1
+
+  clocks:
+    description:
+      Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3.
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    description: |
+      May contain up to three strings:
+        "mclk1" For the clock supplied on MCLK1, recommended to be a
+                high quality audio reference clock.
+        "mclk2" For the clock supplied on MCLK2, required to be an
+                always on 32k clock.
+        "mclk3" For the clock supplied on MCLK3.
+    oneOf:
+      - items:
+        - const: mclk1
+      - items:
+        - const: mclk2
+      - items:
+        - const: mclk3
+      - items:
+        - const: mclk1
+        - const: mclk2
+      - items:
+        - const: mclk1
+        - const: mclk3
+      - items:
+        - const: mclk2
+        - const: mclk3
+      - items:
+        - const: mclk1
+        - const: mclk2
+        - const: mclk3
+
+  AVDD-supply:
+    description:
+      Analogue power supply.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  DBVDD1-supply:
+    description:
+      Databus power supply.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  CPVDD1-supply:
+    description:
+      Charge pump power supply.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  DCVDD-supply:
+    description:
+      Digital power supply, optional on CS47L85, WM1840 where it can
+      be supplied internally.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  MICVDD-supply:
+    description:
+      Microphone power supply, normally supplied internally except on
+      cs47l24, wm1831 where it is mandatory.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupt-parent
+  - interrupts
+  - AVDD-supply
+  - DBVDD1-supply
+  - CPVDD1-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/madera.h>
+    i2c@e0004000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe0004000 0x1000>;
+
+        cs47l85: codec@1a {
+            compatible = "cirrus,cs47l85";
+            reg = <0x1a>;
+
+            reset-gpios = <&gpio 0>;
+            wlf,ldoena = <&gpio 1>;
+
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <&host_irq1>;
+            interrupt-parent = <&gic>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            AVDD-supply = <&vdd1v8>;
+            DBVDD1-supply = <&vdd1v8>;
+            DBVDD2-supply = <&vdd1v8>;
+            DBVDD3-supply = <&vdd1v8>;
+            DBVDD4-supply = <&vdd1v8>;
+            CPVDD1-supply = <&vdd1v8>;
+            CPVDD2-supply = <&vdd1v2>;
+            SPKVDDL-supply = <&vdd5v>;
+            SPKVDDR-supply = <&vdd5v>;
+
+            clocks = <&clks 0>, <&clks 1>, <&clks 2>;
+            clock-names = "mclk1", "mclk2", "mclk3";
+
+            cirrus,dmic-ref = <0 0 MADERA_DMIC_REF_MICBIAS1>;
+            cirrus,inmode = <
+                MADERA_INMODE_SE   MADERA_INMODE_SE
+                MADERA_INMODE_SE   MADERA_INMODE_SE
+                MADERA_INMODE_DIFF MADERA_INMODE_DIFF
+            >;
+            cirrus,max-channels-clocked = <2 0 0>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinsettings>;
+
+            pinsettings: settings-pins {
+                aif1-pin {
+                    groups = "aif1";
+                    function = "aif1";
+                    bias-bus-hold;
+                };
+
+                aif2-pin {
+                    groups = "aif2";
+                    function = "aif2";
+                    bias-bus-hold;
+                };
+
+                aif3-pin {
+                    groups = "aif3";
+                    function = "aif3";
+                    bias-bus-hold;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/madera.txt b/Documentation/devicetree/bindings/mfd/madera.txt
deleted file mode 100644
index 47e2b8bc60519..0000000000000
--- a/Documentation/devicetree/bindings/mfd/madera.txt
+++ /dev/null
@@ -1,114 +0,0 @@ 
-Cirrus Logic Madera class audio codecs Multi-Functional Device
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-See also the child driver bindings in:
-bindings/pinctrl/cirrus,madera-pinctrl.txt
-bindings/regulator/arizona-regulator.txt
-bindings/sound/madera.txt
-
-Required properties:
-
-  - compatible : One of the following chip-specific strings:
-        "cirrus,cs47l15"
-        "cirrus,cs47l35"
-        "cirrus,cs47l85"
-        "cirrus,cs47l90"
-        "cirrus,cs47l91"
-        "cirrus,cs42l92"
-        "cirrus,cs47l92"
-        "cirrus,cs47l93"
-        "cirrus,wm1840"
-
-  - reg : I2C slave address when connected using I2C, chip select number when
-    using SPI.
-
-  - DCVDD-supply : Power supply for the device as defined in
-    bindings/regulator/regulator.txt
-    Mandatory on CS47L15, CS47L35, CS47L90, CS47L91, CS42L92, CS47L92, CS47L93
-    Optional on CS47L85, WM1840
-
-  - AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply :
-    Power supplies for the device
-
-  - DBVDD3-supply, DBVDD4-supply : Power supplies for the device
-    (CS47L85, CS47L90, CS47L91, WM1840)
-
-  - SPKVDDL-supply, SPKVDDR-supply : Power supplies for the device
-    (CS47L85, WM1840)
-
-  - SPKVDD-supply : Power supply for the device
-    (CS47L15, CS47L35)
-
-  - interrupt-controller : Indicates that this device is an interrupt controller
-
-  - #interrupt-cells: the number of cells to describe an IRQ, must be 2.
-    The first cell is the IRQ number.
-    The second cell is the flags, encoded as the trigger masks from
-    bindings/interrupt-controller/interrupts.txt
-
-  - gpio-controller : Indicates this device is a GPIO controller.
-
-  - #gpio-cells : Must be 2. The first cell is the pin number. The second cell
-    is reserved for future use and must be zero
-
-  - interrupt-parent : The parent interrupt controller.
-
-  - interrupts : The interrupt line the /IRQ signal for the device is
-    connected to.
-
-Optional properties:
-
-  - MICVDD-supply : Power supply, only need to be specified if
-    powered externally
-
-  - reset-gpios : One entry specifying the GPIO controlling /RESET.
-    As defined in bindings/gpio.txt.
-    Although optional, it is strongly recommended to use a hardware reset
-
-  - clocks: Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3
-  - clock-names: May contain up to three strings:
-      "mclk1" for the clock supplied on MCLK1, recommended to be a high
-      quality audio reference clock
-      "mclk2" for the clock supplied on MCLK2, required to be an always on
-      32k clock
-      "mclk3" for the clock supplied on MCLK3
-
-  - MICBIASx : Initial data for the MICBIAS regulators, as covered in
-    Documentation/devicetree/bindings/regulator/regulator.txt.
-    One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...)
-    (all codecs)
-
-    One for each output pin (MICBIAS1A, MIBCIAS1B, MICBIAS2A, ...)
-    (all except CS47L85, WM1840)
-
-    The following following additional property is supported for the generator
-    nodes:
-      - cirrus,ext-cap : Set to 1 if the MICBIAS has external decoupling
-        capacitors attached.
-
-Optional child nodes:
-    micvdd : Node containing initialization data for the micvdd regulator
-    See bindings/regulator/arizona-regulator.txt
-
-    ldo1 : Node containing initialization data for the LDO1 regulator
-    See bindings/regulator/arizona-regulator.txt
-    (cs47l85, wm1840)
-
-Example:
-
-cs47l85@0 {
-	compatible = "cirrus,cs47l85";
-	reg = <0>;
-
-	reset-gpios = <&gpio 0>;
-
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	interrupts = <&host_irq1>;
-	interrupt-parent = <&gic>;
-
-	gpio-controller;
-	#gpio-cells = <2>;
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index 92a96cc0ea734..82fb3a4cd81bd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4086,9 +4086,9 @@  L:	patches@opensource.cirrus.com
 S:	Supported
 W:	https://github.com/CirrusLogic/linux-drivers/wiki
 T:	git https://github.com/CirrusLogic/linux-drivers.git
-F:	Documentation/devicetree/bindings/mfd/madera.txt
-F:	Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt
-F:	Documentation/devicetree/bindings/sound/madera.txt
+F:	Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+F:	Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
+F:	Documentation/devicetree/bindings/sound/cirrus,madera.yaml
 F:	drivers/gpio/gpio-madera*
 F:	drivers/irqchip/irq-madera*
 F:	drivers/mfd/cs47l*