@@ -31,7 +31,7 @@
#interrupt-cells = <1>;
ranges;
- nor_flash: flash@0,00000000 {
+ nor_flash: flash@0 {
compatible = "arm,vexpress-flash", "cfi-flash";
reg = <0 0x00000000 0x04000000>,
<4 0x00000000 0x04000000>;
@@ -41,13 +41,13 @@
};
};
- psram@1,00000000 {
+ psram@100000000 {
compatible = "arm,vexpress-psram", "mtd-ram";
reg = <1 0x00000000 0x02000000>;
bank-width = <4>;
};
- ethernet@2,02000000 {
+ ethernet@202000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <2 0x02000000 0x10000>;
interrupts = <15>;
@@ -59,14 +59,14 @@
vddvario-supply = <&v2m_fixed_3v3>;
};
- usb@2,03000000 {
+ usb@203000000 {
compatible = "nxp,usb-isp1761";
reg = <2 0x03000000 0x20000>;
interrupts = <16>;
port1-otg;
};
- iofpga@3,00000000 {
+ iofpga@300000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -151,7 +151,7 @@
<0 0 41 &gic 0 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- ethernet@2,02000000 {
+ ethernet@202000000 {
compatible = "smsc,lan91c111";
reg = <2 0x02000000 0x10000>;
interrupts = <15>;
@@ -178,7 +178,7 @@
clock-output-names = "v2m:refclk32khz";
};
- iofpga@3,00000000 {
+ iofpga@300000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -103,7 +103,7 @@
};
};
- flash@0,00000000 {
+ flash@0 {
/* 2 * 32MiB NOR Flash memory mounted on CS0 */
compatible = "arm,vexpress-flash", "cfi-flash";
reg = <0 0x00000000 0x04000000>;
@@ -120,7 +120,7 @@
};
};
- ethernet@2,00000000 {
+ ethernet@200000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <2 0x00000000 0x10000>;
interrupts = <3>;
@@ -133,7 +133,7 @@
vddvario-supply = <&mb_fixed_3v3>;
};
- iofpga@3,00000000 {
+ iofpga@300000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -9,7 +9,7 @@
motherboard {
arm,v2m-memory-map = "rs2";
- iofpga@3,00000000 {
+ iofpga@300000000 {
virtio-p9@140000 {
compatible = "virtio,mmio";
reg = <0x140000 0x200>;
@@ -17,14 +17,14 @@
#interrupt-cells = <1>;
ranges;
- flash@0,00000000 {
+ flash@0 {
compatible = "arm,vexpress-flash", "cfi-flash";
reg = <0 0x00000000 0x04000000>,
<4 0x00000000 0x04000000>;
bank-width = <4>;
};
- ethernet@2,02000000 {
+ ethernet@202000000 {
compatible = "smsc,lan91c111";
reg = <2 0x02000000 0x10000>;
interrupts = <15>;
@@ -51,7 +51,7 @@
clock-output-names = "v2m:refclk32khz";
};
- iofpga@3,00000000 {
+ iofpga@300000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
The Arm Ltd. boards were using an outdated address convention in the DT node names, by separating the high from the low 32-bits of an address by a comma. Remove the comma from the node name suffix to be DT spec compliant. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 10 +++++----- arch/arm64/boot/dts/arm/foundation-v8.dtsi | 4 ++-- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 6 +++--- arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi | 2 +- arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 6 +++--- 5 files changed, 14 insertions(+), 14 deletions(-)