diff mbox series

[v3,4/5] clk: lochnagar: Move binding over to dtschema

Message ID 20200512152359.11839-4-ckeepax@opensource.cirrus.com
State New
Headers show
Series None | expand

Commit Message

Charles Keepax May 12, 2020, 3:23 p.m. UTC
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---

No changes since v2.

Thanks,
Charles

 .../devicetree/bindings/clock/cirrus,lochnagar.txt | 94 ----------------------
 .../bindings/clock/cirrus,lochnagar.yaml           | 78 ++++++++++++++++++
 2 files changed, 78 insertions(+), 94 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
 create mode 100644 Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
deleted file mode 100644
index 52a064c789eec..0000000000000
--- a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
+++ /dev/null
@@ -1,94 +0,0 @@ 
-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform.  Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the clock portion of
-the driver.
-
-Also see these documents for generic binding information:
-  [1] Clock : ../clock/clock-bindings.txt
-
-And these for relevant defines:
-  [2] include/dt-bindings/clock/lochnagar.h
-
-This binding must be part of the Lochnagar MFD binding:
-  [3] ../mfd/cirrus,lochnagar.txt
-
-Required properties:
-
-  - compatible : One of the following strings:
-                 "cirrus,lochnagar1-clk"
-                 "cirrus,lochnagar2-clk"
-
-  - #clock-cells : Must be 1. The first cell indicates the clock
-    number, see [2] for available clocks and [1].
-
-Optional properties:
-
-  - clocks : Must contain an entry for each clock in clock-names.
-  - clock-names : May contain entries for each of the following
-    clocks:
-     - ln-cdc-clkout : Output clock from CODEC card.
-     - ln-dsp-clkout : Output clock from DSP card.
-     - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional
-       input audio clocks from host system.
-     - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from
-       external connector.
-     - ln-spdif-mclk : Optional input audio clock from SPDIF.
-     - ln-spdif-clkout : Optional input audio clock from SPDIF.
-     - ln-adat-mclk : Optional input audio clock from ADAT.
-     - ln-pmic-32k : On board fixed clock.
-     - ln-clk-12m : On board fixed clock.
-     - ln-clk-11m : On board fixed clock.
-     - ln-clk-24m : On board fixed clock.
-     - ln-clk-22m : On board fixed clock.
-     - ln-clk-8m : On board fixed clock.
-     - ln-usb-clk-24m : On board fixed clock.
-     - ln-usb-clk-12m : On board fixed clock.
-
-  - assigned-clocks : A list of Lochnagar clocks to be reparented, see
-    [2] for available clocks.
-  - assigned-clock-parents : Parents to be assigned to the clocks
-    listed in "assigned-clocks".
-
-Optional nodes:
-
-  - fixed-clock nodes may be registered for the following on board clocks:
-     - ln-pmic-32k : 32768 Hz
-     - ln-clk-12m : 12288000 Hz
-     - ln-clk-11m : 11298600 Hz
-     - ln-clk-24m : 24576000 Hz
-     - ln-clk-22m : 22579200 Hz
-     - ln-clk-8m : 8192000 Hz
-     - ln-usb-clk-24m : 24576000 Hz
-     - ln-usb-clk-12m : 12288000 Hz
-
-Example:
-
-lochnagar {
-	lochnagar-clk {
-		compatible = "cirrus,lochnagar2-clk";
-
-		#clock-cells = <1>;
-
-		clocks = <&clk-audio>, <&clk_pmic>;
-		clock-names = "ln-gf-mclk2", "ln-pmic-32k";
-
-		assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>,
-				  <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>;
-		assigned-clock-parents = <&clk-audio>,
-					 <&clk-pmic>;
-	};
-
-	clk-pmic: clk-pmic {
-		compatible = "fixed-clock";
-		clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
new file mode 100644
index 0000000000000..59de125647ecb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
@@ -0,0 +1,78 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of various
+  application processor systems to provide a full evaluation platform.
+  Audio system topology, clocking and power can all be controlled through
+  the Lochnagar, allowing the device under test to be used in a variety of
+  possible use cases.
+
+  This binding document describes the binding for the clock portion of the
+  driver.
+
+  Also see these documents for generic binding information:
+    [1] Clock : ../clock/clock-bindings.txt
+
+  And these for relevant defines:
+    [2] include/dt-bindings/clock/lochnagar.h
+
+  This binding must be part of the Lochnagar MFD binding:
+    [3] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar1-clk
+      - cirrus,lochnagar2-clk
+
+  '#clock-cells':
+    description:
+      The first cell indicates the clock number, see [2] for available
+      clocks and [1].
+    const: 1
+
+  clock-names:
+    items:
+      enum:
+        - ln-cdc-clkout # Output clock from CODEC card.
+        - ln-dsp-clkout # Output clock from DSP card.
+        - ln-gf-mclk1 # Optional input clock from host system.
+        - ln-gf-mclk2 # Optional input clock from host system.
+        - ln-gf-mclk3 # Optional input clock from host system.
+        - ln-gf-mclk4 # Optional input clock from host system.
+        - ln-psia1-mclk # Optional input clock from external connector.
+        - ln-psia2-mclk # Optional input clock from external connector.
+        - ln-spdif-mclk # Optional input clock from SPDIF.
+        - ln-spdif-clkout # Optional input clock from SPDIF.
+        - ln-adat-mclk # Optional input clock from ADAT.
+        - ln-pmic-32k # On board fixed clock.
+        - ln-clk-12m # On board fixed clock.
+        - ln-clk-11m # On board fixed clock.
+        - ln-clk-24m # On board fixed clock.
+        - ln-clk-22m # On board fixed clock.
+        - ln-clk-8m # On board fixed clock.
+        - ln-usb-clk-24m # On board fixed clock.
+        - ln-usb-clk-12m # On board fixed clock.
+    minItems: 1
+    maxItems: 19
+
+  clocks: true
+  assigned-clocks: true
+  assigned-clock-parents: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#clock-cells'