@@ -295,7 +295,7 @@ examples:
- |
cti@20110000 {
compatible = "arm,coresight-cti", "arm,primecell";
- reg = <0 0x20110000 0 0x1000>;
+ reg = <0x20110000 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
@@ -33,5 +33,5 @@ examples:
- |
prr: chipid@ff000044 {
compatible = "renesas,prr";
- reg = <0 0xff000044 0 4>;
+ reg = <0xff000044 4>;
};
@@ -323,7 +323,7 @@ examples:
tegra_pmc: pmc@7000e400 {
compatible = "nvidia,tegra210-pmc";
- reg = <0x0 0x7000e400 0x0 0x400>;
+ reg = <0x7000e400 0x400>;
clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
#clock-cells = <1>;
@@ -65,7 +65,7 @@ examples:
- |
uart0: serial@58018000 {
compatible = "snps,dw-apb-uart";
- reg = <0x0 0x58018000 0x0 0x2000>;
+ reg = <0x58018000 0x2000>;
clocks = <&clk 45>, <&clk 46>;
clock-names = "baudclk", "apb_pclk";
interrupts = <0 9 4>;
@@ -50,7 +50,7 @@ examples:
- |
dpclk: clock-display@f1f0000 {
compatible = "fsl,ls1028a-plldig";
- reg = <0x0 0xf1f0000 0x0 0xffff>;
+ reg = <0xf1f0000 0xffff>;
#clock-cells = <0>;
clocks = <&osc_27m>;
};
@@ -65,7 +65,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@100000 {
compatible = "qcom,gcc-sc7180";
- reg = <0 0x00100000 0 0x1f0000>;
+ reg = <0x00100000 0x1f0000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
@@ -63,7 +63,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@100000 {
compatible = "qcom,gcc-sm8150";
- reg = <0 0x00100000 0 0x1f0000>;
+ reg = <0x00100000 0x1f0000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&sleep_clk>;
clock-names = "bi_tcxo", "sleep_clk";
@@ -61,7 +61,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@100000 {
compatible = "qcom,gcc-sm8250";
- reg = <0 0x00100000 0 0x1f0000>;
+ reg = <0x00100000 0x1f0000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&sleep_clk>;
clock-names = "bi_tcxo", "sleep_clk";
@@ -66,7 +66,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@af00000 {
compatible = "qcom,sc7180-dispcc";
- reg = <0 0x0af00000 0 0x200000>;
+ reg = <0x0af00000 0x200000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&dsi_phy 0>,
@@ -60,7 +60,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@5090000 {
compatible = "qcom,sc7180-gpucc";
- reg = <0 0x05090000 0 0x9000>;
+ reg = <0x05090000 0x9000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
@@ -50,7 +50,7 @@ examples:
#include <dt-bindings/clock/qcom,gcc-sc7180.h>
clock-controller@41a8000 {
compatible = "qcom,sc7180-mss";
- reg = <0 0x041a8000 0 0x8000>;
+ reg = <0x041a8000 0x8000>;
clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>,
<&gcc GCC_MSS_NAV_AXI_CLK>,
<&gcc GCC_MSS_CFG_AHB_CLK>;
@@ -55,7 +55,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@ab00000 {
compatible = "qcom,sc7180-videocc";
- reg = <0 0x0ab00000 0 0x10000>;
+ reg = <0x0ab00000 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "bi_tcxo";
#clock-cells = <1>;
@@ -75,7 +75,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@af00000 {
compatible = "qcom,sdm845-dispcc";
- reg = <0 0x0af00000 0 0x10000>;
+ reg = <0x0af00000 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
@@ -60,7 +60,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@5090000 {
compatible = "qcom,sdm845-gpucc";
- reg = <0 0x05090000 0 0x9000>;
+ reg = <0x05090000 0x9000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
@@ -55,7 +55,7 @@ examples:
#include <dt-bindings/clock/qcom,rpmh.h>
clock-controller@ab00000 {
compatible = "qcom,sdm845-videocc";
- reg = <0 0x0ab00000 0 0x10000>;
+ reg = <0x0ab00000 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "bi_tcxo";
#clock-cells = <1>;
@@ -76,29 +76,24 @@ examples:
- |
ap_clk: clock-controller@21500000 {
compatible = "sprd,sc9863a-ap-clk";
- reg = <0 0x21500000 0 0x1000>;
+ reg = <0x21500000 0x1000>;
clocks = <&ext_26m>, <&ext_32k>;
clock-names = "ext-26m", "ext-32k";
#clock-cells = <1>;
};
- |
- soc {
- #address-cells = <2>;
- #size-cells = <2>;
-
- ap_ahb_regs: syscon@20e00000 {
- compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd";
- reg = <0 0x20e00000 0 0x4000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0x20e00000 0x4000>;
-
- apahb_gate: apahb-gate@0 {
- compatible = "sprd,sc9863a-apahb-gate";
- reg = <0x0 0x1020>;
- #clock-cells = <1>;
- };
+ syscon@20e00000 {
+ compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd";
+ reg = <0x20e00000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x20e00000 0x4000>;
+
+ apahb_gate: apahb-gate@0 {
+ compatible = "sprd,sc9863a-apahb-gate";
+ reg = <0x0 0x1020>;
+ #clock-cells = <1>;
};
};
@@ -45,7 +45,7 @@ examples:
crypto: crypto-engine@c883e000 {
compatible = "amlogic,gxl-crypto";
- reg = <0x0 0xc883e000 0x0 0x36>;
+ reg = <0xc883e000 0x36>;
interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_BLKMV>;
clock-names = "blkmv";
@@ -60,7 +60,7 @@ examples:
cmm0: cmm@fea40000 {
compatible = "renesas,r8a7796-cmm",
"renesas,rcar-gen3-cmm";
- reg = <0 0xfea40000 0 0x1000>;
+ reg = <0xfea40000 0x1000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
clocks = <&cpg CPG_MOD 711>;
resets = <&cpg 711>;
@@ -122,13 +122,13 @@ examples:
dss: dss@4a00000 {
compatible = "ti,am65x-dss";
- reg = <0x0 0x04a00000 0x0 0x1000>, /* common */
- <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */
- <0x0 0x04a06000 0x0 0x1000>, /* vid */
- <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
- <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
- <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
- <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
+ reg = <0x04a00000 0x1000>, /* common */
+ <0x04a02000 0x1000>, /* vidl1 */
+ <0x04a06000 0x1000>, /* vid */
+ <0x04a07000 0x1000>, /* ovr1 */
+ <0x04a08000 0x1000>, /* ovr2 */
+ <0x04a0a000 0x1000>, /* vp1 */
+ <0x04a0b000 0x1000>; /* vp2 */
reg-names = "common", "vidl1", "vid",
"ovr1", "ovr2", "vp1", "vp2";
ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
@@ -156,23 +156,23 @@ examples:
dss: dss@4a00000 {
compatible = "ti,j721e-dss";
- reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */
- <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
- <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/
- <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/
- <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */
- <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */
- <0x00 0x04a50000 0x00 0x10000>, /* vid1 */
- <0x00 0x04a60000 0x00 0x10000>, /* vid2 */
- <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */
- <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */
- <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */
- <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */
- <0x00 0x04a80000 0x00 0x10000>, /* vp1 */
- <0x00 0x04aa0000 0x00 0x10000>, /* vp2 */
- <0x00 0x04ac0000 0x00 0x10000>, /* vp3 */
- <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */
- <0x00 0x04af0000 0x00 0x10000>; /* wb */
+ reg = <0x04a00000 0x10000>, /* common_m */
+ <0x04a10000 0x10000>, /* common_s0*/
+ <0x04b00000 0x10000>, /* common_s1*/
+ <0x04b10000 0x10000>, /* common_s2*/
+ <0x04a20000 0x10000>, /* vidl1 */
+ <0x04a30000 0x10000>, /* vidl2 */
+ <0x04a50000 0x10000>, /* vid1 */
+ <0x04a60000 0x10000>, /* vid2 */
+ <0x04a70000 0x10000>, /* ovr1 */
+ <0x04a90000 0x10000>, /* ovr2 */
+ <0x04ab0000 0x10000>, /* ovr3 */
+ <0x04ad0000 0x10000>, /* ovr4 */
+ <0x04a80000 0x10000>, /* vp1 */
+ <0x04aa0000 0x10000>, /* vp2 */
+ <0x04ac0000 0x10000>, /* vp3 */
+ <0x04ae0000 0x10000>, /* vp4 */
+ <0x04af0000 0x10000>; /* wb */
reg-names = "common_m", "common_s0",
"common_s1", "common_s2",
"vidl1", "vidl2","vid1","vid2",
@@ -49,7 +49,7 @@ examples:
- |
dma@3000000 {
compatible = "sifive,fu540-c000-pdma";
- reg = <0x0 0x3000000 0x0 0x8000>;
+ reg = <0x3000000 0x8000>;
interrupts = <23 24 25 26 27 28 29 30>;
#dma-cells = <1>;
};
@@ -57,7 +57,7 @@ examples:
compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
interrupt-parent = <&plic>;
interrupts = <7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22>;
- reg = <0x0 0x10060000 0x0 0x1000>;
+ reg = <0x10060000 0x1000>;
clocks = <&tlclk PRCI_CLK_TLCLK>;
gpio-controller;
#gpio-cells = <2>;
@@ -65,21 +65,21 @@ examples:
config_noc: interconnect@1500000 {
compatible = "qcom,sc7180-config-noc";
- reg = <0 0x01500000 0 0x28000>;
+ reg = <0x01500000 0x28000>;
#interconnect-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system_noc: interconnect@1620000 {
compatible = "qcom,sc7180-system-noc";
- reg = <0 0x01620000 0 0x17080>;
+ reg = <0x01620000 0x17080>;
#interconnect-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mmss_noc: interconnect@1740000 {
compatible = "qcom,sc7180-mmss-noc";
- reg = <0 0x01740000 0 0x1c100>;
+ reg = <0x01740000 0x1c100>;
#interconnect-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
@@ -60,14 +60,14 @@ examples:
mem_noc: interconnect@1380000 {
compatible = "qcom,sdm845-mem-noc";
- reg = <0 0x01380000 0 0x27200>;
+ reg = <0x01380000 0x27200>;
#interconnect-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mmss_noc: interconnect@1740000 {
compatible = "qcom,sdm845-mmss-noc";
- reg = <0 0x01740000 0 0x1c1000>;
+ reg = <0x01740000 0x1c1000>;
#interconnect-cells = <1>;
qcom,bcm-voter-names = "apps", "disp";
qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>;
@@ -78,7 +78,7 @@ examples:
compatible = "renesas,irqc-r8a7790", "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
- reg = <0 0xe61c0000 0 0x200>;
+ reg = <0xe61c0000 0x200>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
@@ -87,7 +87,7 @@ examples:
- |
cec_AO: cec@100 {
compatible = "amlogic,meson-gx-ao-cec";
- reg = <0x0 0x00100 0x0 0x14>;
+ reg = <0x00100 0x14>;
interrupts = <199>;
clocks = <&clkc_cec>;
clock-names = "core";
@@ -115,7 +115,7 @@ examples:
venus: video-codec@aa00000 {
compatible = "qcom,sc7180-venus";
- reg = <0 0x0aa00000 0 0xff000>;
+ reg = <0x0aa00000 0xff000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&videocc VENUS_GDSC>,
<&videocc VCODEC0_GDSC>;
@@ -110,7 +110,7 @@ examples:
video-codec@aa00000 {
compatible = "qcom,sdm845-venus-v2";
- reg = <0 0x0aa00000 0 0xff000>;
+ reg = <0x0aa00000 0xff000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
<&videocc VIDEO_CC_VENUS_AHB_CLK>,
@@ -127,7 +127,7 @@ examples:
video-codec@aa00000 {
compatible = "qcom,sdm845-venus";
- reg = <0 0x0aa00000 0 0xff000>;
+ reg = <0x0aa00000 0xff000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
<&videocc VIDEO_CC_VENUS_AHB_CLK>,
@@ -135,7 +135,7 @@ examples:
csi20: csi2@fea80000 {
compatible = "renesas,r8a7796-csi2";
- reg = <0 0xfea80000 0 0x10000>;
+ reg = <0xfea80000 0x10000>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 714>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -306,7 +306,7 @@ examples:
vin1: vin@e6ef1000 {
compatible = "renesas,vin-r8a7790",
"renesas,rcar-gen2-vin";
- reg = <0 0xe6ef1000 0 0x1000>;
+ reg = <0xe6ef1000 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 810>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
@@ -328,7 +328,7 @@ examples:
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a7795";
- reg = <0 0xe6ef0000 0 0x1000>;
+ reg = <0xe6ef0000 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 811>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -365,7 +365,7 @@ examples:
vin2: video@e6ef2000 {
compatible = "renesas,vin-r8a77970";
- reg = <0 0xe6ef2000 0 0x1000>;
+ reg = <0xe6ef2000 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 809>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
@@ -337,7 +337,7 @@ examples:
mc: memory-controller@70019000 {
compatible = "nvidia,tegra124-mc";
- reg = <0x0 0x70019000 0x0 0x1000>;
+ reg = <0x70019000 0x1000>;
clocks = <&tegra_car TEGRA124_CLK_MC>;
clock-names = "mc";
@@ -349,7 +349,7 @@ examples:
external-memory-controller@7001b000 {
compatible = "nvidia,tegra124-emc";
- reg = <0x0 0x7001b000 0x0 0x1000>;
+ reg = <0x7001b000 0x1000>;
clocks = <&car TEGRA124_CLK_EMC>;
clock-names = "emc";
@@ -111,7 +111,7 @@ examples:
- |
memory-controller@70019000 {
compatible = "nvidia,tegra124-mc";
- reg = <0x0 0x70019000 0x0 0x1000>;
+ reg = <0x70019000 0x1000>;
clocks = <&tegra_car 32>;
clock-names = "mc";
@@ -47,7 +47,7 @@ examples:
- |
mmc0: mmc@e0330000 {
compatible = "actions,owl-mmc";
- reg = <0x0 0xe0330000 0x0 0x4000>;
+ reg = <0xe0330000 0x4000>;
interrupts = <0 42 4>;
clocks = <&cmu 56>;
resets = <&cmu 23>;
@@ -109,7 +109,7 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
sdmmc: mmc@ff0c0000 {
compatible = "rockchip,rk3288-dw-mshc";
- reg = <0x0 0xff0c0000 0x0 0x4000>;
+ reg = <0xff0c0000 0x4000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
@@ -162,9 +162,9 @@ examples:
modem-init;
modem-remoteproc = <&mss_pil>;
- reg = <0 0x1e40000 0 0x7000>,
- <0 0x1e47000 0 0x2000>,
- <0 0x1e04000 0 0x2c000>;
+ reg = <0x1e40000 0x7000>,
+ <0x1e47000 0x2000>,
+ <0x1e04000 0x2c000>;
reg-names = "ipa-reg",
"ipa-shared",
"gsi";
@@ -92,7 +92,7 @@ examples:
ethernet@ee700000 {
compatible = "renesas,ether-r8a7790", "renesas,rcar-gen2-ether";
- reg = <0 0xee700000 0 0x400>;
+ reg = <0xee700000 0x400>;
interrupt-parent = <&gic>;
interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
@@ -164,37 +164,41 @@ examples:
#include <dt-bindings/soc/ti,sci_pm_domain.h>
#include <dt-bindings/net/ti-dp83867.h>
- mcu_cpsw: ethernet@46000000 {
- compatible = "ti,am654-cpsw-nuss";
+ bus {
#address-cells = <2>;
#size-cells = <2>;
- reg = <0x0 0x46000000 0x0 0x200000>;
- reg-names = "cpsw_nuss";
- ranges = <0x0 0x0 0x46000000 0x0 0x200000>;
- dma-coherent;
- clocks = <&k3_clks 5 10>;
- clock-names = "fck";
- power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
- pinctrl-names = "default";
- pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
-
- dmas = <&mcu_udmap 0xf000>,
- <&mcu_udmap 0xf001>,
- <&mcu_udmap 0xf002>,
- <&mcu_udmap 0xf003>,
- <&mcu_udmap 0xf004>,
- <&mcu_udmap 0xf005>,
- <&mcu_udmap 0xf006>,
- <&mcu_udmap 0xf007>,
- <&mcu_udmap 0x7000>;
- dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
- "rx";
-
- ethernet-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpsw_port1: port@1 {
+
+ mcu_cpsw: ethernet@46000000 {
+ compatible = "ti,am654-cpsw-nuss";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0x46000000 0x0 0x200000>;
+ reg-names = "cpsw_nuss";
+ ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+ dma-coherent;
+ clocks = <&k3_clks 5 10>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+
+ dmas = <&mcu_udmap 0xf000>,
+ <&mcu_udmap 0xf001>,
+ <&mcu_udmap 0xf002>,
+ <&mcu_udmap 0xf003>,
+ <&mcu_udmap 0xf004>,
+ <&mcu_udmap 0xf005>,
+ <&mcu_udmap 0xf006>,
+ <&mcu_udmap 0xf007>,
+ <&mcu_udmap 0x7000>;
+ dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "rx";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw_port1: port@1 {
reg = <1>;
ti,mac-only;
label = "port1";
@@ -203,22 +207,23 @@ examples:
phy-mode = "rgmii-rxid";
phy-handle = <&phy0>;
- };
- };
-
- davinci_mdio: mdio@f00 {
- compatible = "ti,cpsw-mdio","ti,davinci_mdio";
- reg = <0x0 0xf00 0x0 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&k3_clks 5 10>;
- clock-names = "fck";
- bus_freq = <1000000>;
-
- phy0: ethernet-phy@0 {
+ };
+ };
+
+ davinci_mdio: mdio@f00 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ reg = <0x0 0xf00 0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 5 10>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+
+ phy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- };
+ };
+ };
};
};
@@ -30,6 +30,6 @@ examples:
- |
mpphy: phy@0 {
compatible = "amlogic,axg-mipi-pcie-analog-phy";
- reg = <0x0 0x0 0x0 0xc>;
+ reg = <0x0 0xc>;
#phy-cells = <1>;
};
@@ -44,7 +44,7 @@ examples:
#include <dt-bindings/phy/phy.h>
pcie_phy: pcie-phy@ff644000 {
compatible = "amlogic,axg-pcie-phy";
- reg = <0x0 0xff644000 0x0 0x1c>;
+ reg = <0xff644000 0x1c>;
resets = <&reset RESET_PCIE_PHY>;
phys = <&mipi_analog_phy PHY_TYPE_PCIE>;
phy-names = "analog";
@@ -117,24 +117,30 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/phy/phy.h>
- torrent_phy: torrent-phy@f0fb500000 {
- compatible = "cdns,torrent-phy";
- reg = <0xf0 0xfb500000 0x0 0x00100000>,
- <0xf0 0xfb030a00 0x0 0x00000040>;
- reg-names = "torrent_phy", "dptx_phy";
- resets = <&phyrst 0>;
- clocks = <&ref_clk>;
- clock-names = "refclk";
- #address-cells = <1>;
- #size-cells = <0>;
- torrent_phy_dp: phy@0 {
- reg = <0>;
- resets = <&phyrst 1>, <&phyrst 2>,
- <&phyrst 3>, <&phyrst 4>;
- #phy-cells = <0>;
- cdns,phy-type = <PHY_TYPE_DP>;
- cdns,num-lanes = <4>;
- cdns,max-bit-rate = <8100>;
- };
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ torrent-phy@f0fb500000 {
+ compatible = "cdns,torrent-phy";
+ reg = <0xf0 0xfb500000 0x0 0x00100000>,
+ <0xf0 0xfb030a00 0x0 0x00000040>;
+ reg-names = "torrent_phy", "dptx_phy";
+ resets = <&phyrst 0>;
+ clocks = <&ref_clk>;
+ clock-names = "refclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy@0 {
+ reg = <0>;
+ resets = <&phyrst 1>, <&phyrst 2>,
+ <&phyrst 3>, <&phyrst 4>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_DP>;
+ cdns,num-lanes = <4>;
+ cdns,max-bit-rate = <8100>;
+ };
+ };
};
...
@@ -59,7 +59,7 @@ examples:
- |
dsi_dphy: phy@ff2e0000 {
compatible = "rockchip,px30-dsi-dphy";
- reg = <0x0 0xff2e0000 0x0 0x10000>;
+ reg = <0xff2e0000 0x10000>;
clocks = <&pmucru 13>, <&cru 12>;
clock-names = "ref", "pclk";
resets = <&cru 12>;
@@ -121,7 +121,7 @@ examples:
lhc: lhc@20 {
compatible = "aspeed,ast2500-lhc";
- reg = <0x20 0x24 0x48 0x8>;
+ reg = <0x20 0x24>, <0x48 0x8>;
};
};
};
@@ -68,7 +68,7 @@ examples:
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
- reg = <0 0xe6e30000 0 0x8>;
+ reg = <0xe6e30000 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 523>;
@@ -55,7 +55,7 @@ examples:
compatible = "sifive,fu540-c000-uart", "sifive,uart0";
interrupt-parent = <&plic0>;
interrupts = <80>;
- reg = <0x0 0x10010000 0x0 0x1000>;
+ reg = <0x10010000 0x1000>;
clocks = <&prci PRCI_CLK_TLCLK>;
};
@@ -86,7 +86,7 @@ examples:
aiu: audio-controller@5400 {
compatible = "amlogic,aiu-gxl", "amlogic,aiu";
#sound-dai-cells = <2>;
- reg = <0x0 0x5400 0x0 0x2ac>;
+ reg = <0x5400 0x2ac>;
interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "i2s", "spdif";
@@ -110,4 +110,3 @@ examples:
"spdif_mclk_sel";
resets = <&reset RESET_AIU>;
};
-
@@ -45,7 +45,7 @@ examples:
toacodec: audio-controller@740 {
compatible = "amlogic,g12a-toacodec";
- reg = <0x0 0x740 0x0 0x4>;
+ reg = <0x740 0x4>;
#sound-dai-cells = <1>;
resets = <&clkc_audio AUD_RESET_TOACODEC>;
};
@@ -49,10 +49,9 @@ examples:
acodec: audio-controller@32000 {
compatible = "amlogic,t9015";
- reg = <0x0 0x32000 0x0 0x14>;
+ reg = <0x32000 0x14>;
#sound-dai-cells = <0>;
clocks = <&clkc CLKID_AUDIO_CODEC>;
clock-names = "pclk";
resets = <&reset RESET_AUDIO_CODEC>;
};
-
@@ -145,7 +145,7 @@ examples:
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7791", "renesas,rcar-gen2-msiof";
- reg = <0 0xe6e20000 0 0x0064>;
+ reg = <0xe6e20000 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
@@ -70,7 +70,7 @@ examples:
- |
spi: spi@10040000 {
compatible = "sifive,fu540-c000-spi", "sifive,spi0";
- reg = <0x0 0x10040000 0x0 0x1000 0x0 0x20000000 0x0 0x10000000>;
+ reg = <0x10040000 0x1000>, <0x20000000 0x10000000>;
interrupt-parent = <&plic>;
interrupts = <51>;
clocks = <&tlclk>;
@@ -94,8 +94,8 @@ examples:
thermal@e61f0000 {
compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
- reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
- <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
+ reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
+ <0xe61f0200 0x38>, <0xe61f0300 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
power-domains = <&pd_c5>;
@@ -111,7 +111,7 @@ examples:
compatible = "renesas,thermal-r8a7790",
"renesas,rcar-gen2-thermal",
"renesas,rcar-thermal";
- reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+ reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
@@ -83,7 +83,7 @@ examples:
- |
ap_thm0: thermal@32200000 {
compatible = "sprd,ums512-thermal";
- reg = <0 0x32200000 0 0x10000>;
+ reg = <0x32200000 0x10000>;
clock-names = "enable";
clocks = <&aonapb_gate 32>;
#thermal-sensor-cells = <1>;
@@ -111,7 +111,7 @@ examples:
- |
usb: usb@ffe09000 {
compatible = "amlogic,meson-g12a-usb-ctrl";
- reg = <0x0 0xffe09000 0x0 0xa0>;
+ reg = <0xffe09000 0xa0>;
interrupts = <16>;
#address-cells = <1>;
#size-cells = <1>;
@@ -147,4 +147,3 @@ examples:
snps,quirk-frame-length-adjustment;
};
};
-
@@ -101,7 +101,7 @@ examples:
compatible = "ibm,usb-ehci-440epx", "generic-ehci";
interrupt-parent = <&UIC0>;
interrupts = <0x1a 4>;
- reg = <0 0xe0000300 90 0 0xe0000390 70>;
+ reg = <0xe0000300 90>, <0xe0000390 70>;
big-endian;
};
@@ -163,9 +163,9 @@ examples:
usb@700d0000 {
compatible = "nvidia,tegra210-xudc";
- reg = <0x0 0x700d0000 0x0 0x8000>,
- <0x0 0x700d8000 0x0 0x1000>,
- <0x0 0x700d9000 0x0 0x1000>;
+ reg = <0x700d0000 0x8000>,
+ <0x700d8000 0x1000>,
+ <0x700d9000 0x1000>;
reg-names = "base", "fpci", "ipfs";
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
@@ -72,7 +72,7 @@ examples:
usb3_peri0: usb@ee020000 {
compatible = "renesas,r8a774c0-usb3-peri", "renesas,rcar-gen3-usb3-peri";
- reg = <0 0xee020000 0 0x400>;
+ reg = <0xee020000 0x400>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
companion = <&xhci0>;
@@ -120,7 +120,7 @@ examples:
usbhs: usb@e6590000 {
compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
- reg = <0 0xe6590000 0 0x100>;
+ reg = <0xe6590000 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>;
};
@@ -57,30 +57,36 @@ examples:
- |
#include <dt-bindings/soc/ti,sci_pm_domain.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
- cdns_usb@4104000 {
- compatible = "ti,j721e-usb";
- reg = <0x00 0x4104000 0x00 0x100>;
- power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 288 15>, <&k3_clks 288 3>;
- clock-names = "ref", "lpm";
- assigned-clocks = <&k3_clks 288 15>; /* USB2_REFCLK */
- assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */
- #address-cells = <2>;
- #size-cells = <2>;
- usb@6000000 {
- compatible = "cdns,usb3";
- reg = <0x00 0x6000000 0x00 0x10000>,
- <0x00 0x6010000 0x00 0x10000>,
- <0x00 0x6020000 0x00 0x10000>;
- reg-names = "otg", "xhci", "dev";
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */
- interrupt-names = "host",
- "peripheral",
- "otg";
- maximum-speed = "super-speed";
- dr_mode = "otg";
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cdns_usb@4104000 {
+ compatible = "ti,j721e-usb";
+ reg = <0x00 0x4104000 0x00 0x100>;
+ power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 288 15>, <&k3_clks 288 3>;
+ clock-names = "ref", "lpm";
+ assigned-clocks = <&k3_clks 288 15>; /* USB2_REFCLK */
+ assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ usb@6000000 {
+ compatible = "cdns,usb3";
+ reg = <0x00 0x6000000 0x00 0x10000>,
+ <0x00 0x6010000 0x00 0x10000>,
+ <0x00 0x6020000 0x00 0x10000>;
+ reg-names = "otg", "xhci", "dev";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */
+ interrupt-names = "host",
+ "peripheral",
+ "otg";
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+ };
};
};
@@ -57,7 +57,7 @@ examples:
watchdog0: rti@2200000 {
compatible = "ti,rti-wdt";
- reg = <0x0 0x2200000 0x0 0x100>;
+ reg = <0x2200000 0x100>;
clocks = <&k3_clks 252 1>;
power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
assigned-clocks = <&k3_clks 252 1>;
The examples template is a 'simple-bus' with a size of 1 cell for #address-cells and #size-cells. The schema was only checking the entries had between 2 and 4 cells which really only errors on I2C or SPI type devices with a single cell. The easiest fix in most cases is to change the 'reg' property to for 1 cell address and size. In some cases with child devices having 2 cells, that doesn't make sense so a bus node is needed. Signed-off-by: Rob Herring <robh@kernel.org> --- .../bindings/arm/coresight-cti.yaml | 2 +- .../devicetree/bindings/arm/renesas,prr.yaml | 2 +- .../arm/tegra/nvidia,tegra20-pmc.yaml | 2 +- .../bindings/clock/bitmain,bm1880-clk.yaml | 2 +- .../devicetree/bindings/clock/fsl,plldig.yaml | 2 +- .../bindings/clock/qcom,gcc-sc7180.yaml | 2 +- .../bindings/clock/qcom,gcc-sm8150.yaml | 2 +- .../bindings/clock/qcom,gcc-sm8250.yaml | 2 +- .../bindings/clock/qcom,sc7180-dispcc.yaml | 2 +- .../bindings/clock/qcom,sc7180-gpucc.yaml | 2 +- .../bindings/clock/qcom,sc7180-mss.yaml | 2 +- .../bindings/clock/qcom,sc7180-videocc.yaml | 2 +- .../bindings/clock/qcom,sdm845-dispcc.yaml | 2 +- .../bindings/clock/qcom,sdm845-gpucc.yaml | 2 +- .../bindings/clock/qcom,sdm845-videocc.yaml | 2 +- .../bindings/clock/sprd,sc9863a-clk.yaml | 29 +++--- .../bindings/crypto/amlogic,gxl-crypto.yaml | 2 +- .../bindings/display/renesas,cmm.yaml | 2 +- .../bindings/display/ti/ti,am65x-dss.yaml | 14 +-- .../bindings/display/ti/ti,j721e-dss.yaml | 34 +++---- .../bindings/dma/sifive,fu540-c000-pdma.yaml | 2 +- .../devicetree/bindings/gpio/sifive,gpio.yaml | 2 +- .../bindings/interconnect/qcom,sc7180.yaml | 6 +- .../bindings/interconnect/qcom,sdm845.yaml | 4 +- .../interrupt-controller/renesas,irqc.yaml | 2 +- .../media/amlogic,meson-gx-ao-cec.yaml | 2 +- .../bindings/media/qcom,sc7180-venus.yaml | 2 +- .../bindings/media/qcom,sdm845-venus-v2.yaml | 2 +- .../bindings/media/qcom,sdm845-venus.yaml | 2 +- .../bindings/media/renesas,csi2.yaml | 2 +- .../bindings/media/renesas,vin.yaml | 6 +- .../nvidia,tegra124-emc.yaml | 4 +- .../nvidia,tegra124-mc.yaml | 2 +- .../devicetree/bindings/mmc/owl-mmc.yaml | 2 +- .../bindings/mmc/rockchip-dw-mshc.yaml | 2 +- .../devicetree/bindings/net/qcom,ipa.yaml | 6 +- .../bindings/net/renesas,ether.yaml | 2 +- .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 91 ++++++++++--------- .../amlogic,meson-axg-mipi-pcie-analog.yaml | 2 +- .../bindings/phy/amlogic,meson-axg-pcie.yaml | 2 +- .../bindings/phy/phy-cadence-torrent.yaml | 44 +++++---- .../bindings/phy/rockchip,px30-dsi-dphy.yaml | 2 +- .../pinctrl/aspeed,ast2500-pinctrl.yaml | 2 +- .../bindings/pwm/renesas,pwm-rcar.yaml | 2 +- .../bindings/serial/sifive-serial.yaml | 2 +- .../bindings/sound/amlogic,aiu.yaml | 3 +- .../bindings/sound/amlogic,g12a-toacodec.yaml | 2 +- .../bindings/sound/amlogic,t9015.yaml | 3 +- .../bindings/spi/renesas,sh-msiof.yaml | 2 +- .../devicetree/bindings/spi/spi-sifive.yaml | 2 +- .../bindings/thermal/rcar-thermal.yaml | 6 +- .../bindings/thermal/sprd-thermal.yaml | 2 +- .../usb/amlogic,meson-g12a-usb-ctrl.yaml | 3 +- .../devicetree/bindings/usb/generic-ehci.yaml | 2 +- .../bindings/usb/nvidia,tegra-xudc.yaml | 6 +- .../bindings/usb/renesas,usb3-peri.yaml | 2 +- .../bindings/usb/renesas,usbhs.yaml | 2 +- .../devicetree/bindings/usb/ti,j721e-usb.yaml | 54 ++++++----- .../bindings/watchdog/ti,rti-wdt.yaml | 2 +- 59 files changed, 204 insertions(+), 195 deletions(-)