new file mode 100644
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant battery
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Battery compatible with the smart battery system specifications
+
+properties:
+
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ti,bq20z65
+ - ti,bq20z75
+ - enum:
+ - sbs,sbs-battery
+ - items:
+ - const: sbs,sbs-battery
+
+ reg:
+ maxItems: 1
+
+ sbs,i2c-retry-count:
+ description:
+ The number of times to retry I2C transactions on I2C IO failure.
+ default: 0
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+
+ sbs,poll-retry-count:
+ description:
+ The number of times to try looking for new status after an external
+ change notification.
+ default: 0
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+
+ sbs,battery-detect-gpios:
+ description:
+ GPIO which signals battery detection. If this is not supplied, the bus
+ needs to be polled to detect the battery.
+ maxItems: 1
+
+ sbs,disable-charger-broadcasts:
+ description:
+ SBS batteries by default send broadcast messages to SBS compliant chargers to
+ configure max. charge current/voltage. If your hardware does not have an SBS
+ compliant charger it should be disabled via this property to avoid blocking
+ the bus. Also some SBS battery fuel gauges are known to have a buggy multi-
+ master implementation.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@b {
+ compatible = "ti,bq20z75", "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,i2c-retry-count = <2>;
+ sbs,poll-retry-count = <10>;
+ sbs,battery-detect-gpios = <&gpio 122 GPIO_ACTIVE_HIGH>;
+ sbs,disable-charger-broadcasts;
+ };
+ };
deleted file mode 100644
@@ -1,30 +0,0 @@
-SBS sbs-battery
-~~~~~~~~~~
-
-Required properties :
- - compatible: "<vendor>,<part-number>", "sbs,sbs-battery" as fallback. The
- part number compatible string might be used in order to take care of
- vendor specific registers.
- Known <vendor>,<part-number>:
- ti,bq20z65
- ti,bq20z75
-
-Optional properties :
- - sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c
- IO failure.
- - sbs,poll-retry-count : The number of times to try looking for new status
- after an external change notification.
- - sbs,battery-detect-gpios : The gpio which signals battery detection and
- a flag specifying its polarity.
- - sbs,disable-charger-broadcasts: for systems without sbs compliant chargers
-
-Example:
-
- battery@b {
- compatible = "ti,bq20z75", "sbs,sbs-battery";
- reg = <0xb>;
- sbs,i2c-retry-count = <2>;
- sbs,poll-retry-count = <10>;
- sbs,battery-detect-gpios = <&gpio-controller 122 1>;
- sbs,disable-charger-broadcasts;
- }
Convert sbs-battery bindings to YAML. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- .../power/supply/sbs,sbs-battery.yaml | 83 +++++++++++++++++++ .../bindings/power/supply/sbs_sbs-battery.txt | 30 ------- 2 files changed, 83 insertions(+), 30 deletions(-) create mode 100644 Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml delete mode 100644 Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt