diff mbox series

[05/16] ARM: dts: at91: sama5d2: Move flx1 definitions in the SoC dtsi

Message ID 20200514050301.147442-6-tudor.ambarus@microchip.com
State New
Headers show
Series ARM: dts: at91: sama5d2: Rework Flexcom definitions | expand

Commit Message

Tudor Ambarus May 14, 2020, 5:03 a.m. UTC 
From: Tudor Ambarus <tudor.ambarus@microchip.com>

The Flexcom IP is part of the sama5d2 SoC. Move the flx0 node together
with its function definitions in sama5d2.dtsi. Boards will just fill
the pins and enable the desired functions.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts |  7 -----
 arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 12 ---------
 arch/arm/boot/dts/sama5d2.dtsi              | 29 +++++++++++++++++++++
 3 files changed, 29 insertions(+), 19 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index abbf14e29d85..a0deff15fb9a 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -126,20 +126,13 @@ 
 				status = "okay";
 
 				i2c3: i2c@600 {
-					compatible = "atmel,sama5d2-i2c";
-					reg = <0x600 0x200>;
-					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <0>, <0>;
 					dma-names = "tx", "rx";
 					i2c-analog-filter;
 					i2c-digital-filter;
 					i2c-digital-filter-width-ns = <35>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_mikrobus_i2c>;
-					atmel,fifo-size = <16>;
 					status = "okay";
 				};
 			};
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
index bea3d60b9722..a06700e53e4c 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -36,18 +36,6 @@ 
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 
 	uart6: serial@200 {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0x200 0x200>;
-		interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(13))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(14))>;
-		dma-names = "tx", "rx";
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
-		clock-names = "usart";
 		pinctrl-0 = <&pinctrl_flx1_default>;
 		pinctrl-names = "default";
 	};
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 89064225e9aa..79ed7bd02df6 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -645,6 +645,35 @@ 
 				#size-cells = <1>;
 				ranges = <0x0 0xf8038000 0x800>;
 				status = "disabled";
+
+				uart6: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					status = "disabled";
+				};
+
+				i2c3: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			securam: sram@f8044000 {