diff mbox series

[3/3] arm64: dts: qcom: apq8016-sbc: merge -pins.dtsi into main .dtsi

Message ID 20200514112754.148919-3-stephan@gerhold.net
State New
Headers show
Series [1/3] arm64: dts: qcom: msm8916: avoid using _ in node names | expand

Commit Message

Stephan Gerhold May 14, 2020, 11:27 a.m. UTC 
apq8016-sbc.dtsi is the only remaining device which takes up
4 files since it has its pinctrl split into separate files.

Actually this does not really make the device tree easier to read
(just harder to find nodes). For db820c the files were merged in
commit 88264f1f6bf5 ("arm64: dts: qcom: db820c: Remove pin specific files").

Do the same for apq8016-sbc (db410c) and move the pinctrl definitions
into apq8016-sbc.dtsi.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 .../boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi  |  74 --------
 .../boot/dts/qcom/apq8016-sbc-soc-pins.dtsi   |  89 ----------
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi     | 158 +++++++++++++++++-
 3 files changed, 156 insertions(+), 165 deletions(-)
 delete mode 100644 arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
 delete mode 100644 arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
deleted file mode 100644
index 41907938014c..000000000000
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
+++ /dev/null
@@ -1,74 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-
-&pm8916_gpios {
-
-	usb_hub_reset_pm: usb-hub-reset-pm {
-		pinconf {
-			pins = "gpio3";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-disable;
-			output-high;
-		};
-	};
-
-	usb_hub_reset_pm_device: usb-hub-reset-pm-device {
-		pinconf {
-			pins = "gpio3";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-		};
-	};
-
-	usb_sw_sel_pm: usb-sw-sel-pm {
-		pinconf {
-			pins = "gpio4";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			power-source = <PM8916_GPIO_VPH>;
-			input-disable;
-			output-high;
-		};
-	};
-
-	usb_sw_sel_pm_device: usb-sw-sel-pm-device {
-		pinconf {
-			pins = "gpio4";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			power-source = <PM8916_GPIO_VPH>;
-			input-disable;
-			output-low;
-		};
-	};
-
-	pm8916_gpios_leds: pm8916-gpios-leds {
-		pinconf {
-			pins = "gpio1", "gpio2";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-		};
-	};
-};
-
-&pm8916_mpps {
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&ls_exp_gpio_f>;
-
-	ls_exp_gpio_f: pm8916-mpp4 {
-		pinconf {
-			pins = "mpp4";
-			function = "digital";
-			output-low;
-			power-source = <PM8916_MPP_L5>;	// 1.8V
-		};
-	};
-
-	pm8916_mpps_leds: pm8916-mpps-leds {
-		pinconf {
-			pins = "mpp2", "mpp3";
-			function = "digital";
-			output-low;
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
deleted file mode 100644
index ac00beec102f..000000000000
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
+++ /dev/null
@@ -1,89 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/gpio/gpio.h>
-
-&msmgpio {
-
-	msmgpio_leds: msmgpio-leds {
-		pinconf {
-			pins = "gpio21", "gpio120";
-			function = "gpio";
-			output-low;
-		};
-	};
-
-	usb_id_default: usb-id-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio121";
-		};
-
-		pinconf {
-			pins = "gpio121";
-			drive-strength = <8>;
-			input-enable;
-			bias-pull-up;
-		};
-	};
-
-	adv7533_int_active: adv533-int-active {
-		pinmux {
-			function = "gpio";
-			pins = "gpio31";
-		};
-		pinconf {
-			pins = "gpio31";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	adv7533_int_suspend: adv7533-int-suspend {
-		pinmux {
-			function = "gpio";
-			pins = "gpio31";
-		};
-		pinconf {
-			pins = "gpio31";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	adv7533_switch_active: adv7533-switch-active {
-		pinmux {
-			function = "gpio";
-			pins = "gpio32";
-		};
-		pinconf {
-			pins = "gpio32";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	adv7533_switch_suspend: adv7533-switch-suspend {
-		pinmux {
-			function = "gpio";
-			pins = "gpio32";
-		};
-		pinconf {
-			pins = "gpio32";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	msm_key_volp_n_default: msm-key-volp-n-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio107";
-		};
-		pinconf {
-			pins = "gpio107";
-			drive-strength = <8>;
-			input-enable;
-			bias-pull-up;
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 08c7538b9c9f..8a4b790aa7ff 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -5,10 +5,10 @@ 
 
 #include "msm8916.dtsi"
 #include "pm8916.dtsi"
-#include "apq8016-sbc-soc-pins.dtsi"
-#include "apq8016-sbc-pmic-pins.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 #include <dt-bindings/sound/apq8016-lpass.h>
 
 /*
@@ -777,3 +777,157 @@  l18 {
 		regulator-max-microvolt = <3337000>;
 	};
 };
+
+&msmgpio {
+	msmgpio_leds: msmgpio-leds {
+		pinconf {
+			pins = "gpio21", "gpio120";
+			function = "gpio";
+			output-low;
+		};
+	};
+
+	usb_id_default: usb-id-default {
+		pinmux {
+			function = "gpio";
+			pins = "gpio121";
+		};
+
+		pinconf {
+			pins = "gpio121";
+			drive-strength = <8>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	adv7533_int_active: adv533-int-active {
+		pinmux {
+			function = "gpio";
+			pins = "gpio31";
+		};
+		pinconf {
+			pins = "gpio31";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	adv7533_int_suspend: adv7533-int-suspend {
+		pinmux {
+			function = "gpio";
+			pins = "gpio31";
+		};
+		pinconf {
+			pins = "gpio31";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	adv7533_switch_active: adv7533-switch-active {
+		pinmux {
+			function = "gpio";
+			pins = "gpio32";
+		};
+		pinconf {
+			pins = "gpio32";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	adv7533_switch_suspend: adv7533-switch-suspend {
+		pinmux {
+			function = "gpio";
+			pins = "gpio32";
+		};
+		pinconf {
+			pins = "gpio32";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	msm_key_volp_n_default: msm-key-volp-n-default {
+		pinmux {
+			function = "gpio";
+			pins = "gpio107";
+		};
+		pinconf {
+			pins = "gpio107";
+			drive-strength = <8>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
+
+&pm8916_gpios {
+	usb_hub_reset_pm: usb-hub-reset-pm {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-disable;
+			output-high;
+		};
+	};
+
+	usb_hub_reset_pm_device: usb-hub-reset-pm-device {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+		};
+	};
+
+	usb_sw_sel_pm: usb-sw-sel-pm {
+		pinconf {
+			pins = "gpio4";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			power-source = <PM8916_GPIO_VPH>;
+			input-disable;
+			output-high;
+		};
+	};
+
+	usb_sw_sel_pm_device: usb-sw-sel-pm-device {
+		pinconf {
+			pins = "gpio4";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			power-source = <PM8916_GPIO_VPH>;
+			input-disable;
+			output-low;
+		};
+	};
+
+	pm8916_gpios_leds: pm8916-gpios-leds {
+		pinconf {
+			pins = "gpio1", "gpio2";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+		};
+	};
+};
+
+&pm8916_mpps {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f>;
+
+	ls_exp_gpio_f: pm8916-mpp4 {
+		pinconf {
+			pins = "mpp4";
+			function = "digital";
+			output-low;
+			power-source = <PM8916_MPP_L5>;	// 1.8V
+		};
+	};
+
+	pm8916_mpps_leds: pm8916-mpps-leds {
+		pinconf {
+			pins = "mpp2", "mpp3";
+			function = "digital";
+			output-low;
+		};
+	};
+};