@@ -65,6 +65,7 @@
#define DP83869_RGMII_RX_CLK_DELAY_EN BIT(0)
/* STRAP_STS1 bits */
+#define DP83869_STRAP_OP_MODE_MASK GENMASK(2, 0)
#define DP83869_STRAP_STS1_RESERVED BIT(11)
#define DP83869_STRAP_MIRROR_ENABLED BIT(12)
@@ -161,6 +162,20 @@ static int dp83869_config_port_mirroring(struct phy_device *phydev)
DP83869_CFG3_PORT_MIRROR_EN);
}
+static int dp83869_set_strapped_mode(struct phy_device *phydev)
+{
+ struct dp83869_private *dp83869 = phydev->priv;
+ u16 val;
+
+ val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_STRAP_STS1);
+ if (val < 0)
+ return val;
+
+ dp83869->mode = val & DP83869_STRAP_OP_MODE_MASK;
+
+ return 0;
+}
+
#ifdef CONFIG_OF_MDIO
static int dp83869_of_init(struct phy_device *phydev)
{
@@ -185,6 +200,10 @@ static int dp83869_of_init(struct phy_device *phydev)
if (dp83869->mode < DP83869_RGMII_COPPER_ETHERNET ||
dp83869->mode > DP83869_SGMII_COPPER_ETHERNET)
return -EINVAL;
+ } else {
+ ret = dp83869_set_strapped_mode(phydev);
+ if (ret)
+ return ret;
}
if (of_property_read_bool(of_node, "ti,max-output-impedance"))
@@ -218,7 +237,7 @@ static int dp83869_of_init(struct phy_device *phydev)
#else
static int dp83869_of_init(struct phy_device *phydev)
{
- return 0;
+ return dp83869_set_strapped_mode(phydev);
}
#endif /* CONFIG_OF_MDIO */
If the op-mode for the device is not set in the device tree then set the strapped op-mode and store it for later configuration. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- drivers/net/phy/dp83869.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)