@@ -389,6 +389,13 @@
};
};
+&wifi {
+ status = "okay";
+ wifi-firmware {
+ iommus = <&apps_smmu 0xc2 0x1>;
+ };
+};
+
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
&qspi_clk {
@@ -2811,6 +2811,28 @@
#freq-domain-cells = <1>;
};
+
+ wifi: wifi@18800000 {
+ compatible = "qcom,wcn3990-wifi";
+ reg = <0 0x18800000 0 0x800000>;
+ reg-names = "membase";
+ iommus = <&apps_smmu 0xc0 0x1>;
+ interrupts =
+ <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
+ <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
+ <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
+ memory-region = <&wlan_mem>;
+ status = "disabled";
+ };
};
thermal-zones {
Add device node for the ath10k SNOC platform driver probe and add resources required for WCN3990 on sc7180 soc. Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> --- Changes from v10: - Corrected the position of wifi node, as per address - Removed the wlan_fw_mem from reserved memory, since its already added as reserved memory in board DT file. --- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 7 +++++++ arch/arm64/boot/dts/qcom/sc7180.dtsi | 22 ++++++++++++++++++++++ 2 files changed, 29 insertions(+)