diff mbox series

[v4,02/16] spi: dw: Enable interrupts in accordance with DMA xfer mode

Message ID 20200522000806.7381-3-Sergey.Semin@baikalelectronics.ru
State Superseded
Headers show
Series None | expand

Commit Message

Serge Semin May 22, 2020, 12:07 a.m. UTC
It's pointless to track the Tx overrun interrupts if Rx-only SPI
transfer is issued. Similarly there is no need in handling the Rx
overrun/underrun interrupts if Tx-only SPI transfer is executed.
So lets unmask the interrupts only if corresponding SPI
transactions are implied.

Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
 drivers/spi/spi-dw-mid.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 2152c0cb3953..f24fcd925b48 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -297,19 +297,23 @@  static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 
 static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
 {
-	u16 dma_ctrl = 0;
+	u16 imr = 0, dma_ctrl = 0;
 
 	dw_writel(dws, DW_SPI_DMARDLR, 0xf);
 	dw_writel(dws, DW_SPI_DMATDLR, 0x10);
 
-	if (xfer->tx_buf)
+	if (xfer->tx_buf) {
 		dma_ctrl |= SPI_DMA_TDMAE;
-	if (xfer->rx_buf)
+		imr |= SPI_INT_TXOI;
+	}
+	if (xfer->rx_buf) {
 		dma_ctrl |= SPI_DMA_RDMAE;
+		imr |= SPI_INT_RXUI | SPI_INT_RXOI;
+	}
 	dw_writel(dws, DW_SPI_DMACR, dma_ctrl);
 
 	/* Set the interrupt mask */
-	spi_umask_intr(dws, SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI);
+	spi_umask_intr(dws, imr);
 
 	dws->transfer_handler = dma_transfer;