diff mbox series

[net-next,v4,1/4] dt-bindings: net: Add tx and rx internal delays

Message ID 20200527164934.28651-2-dmurphy@ti.com
State New
Headers show
Series [net-next,v4,1/4] dt-bindings: net: Add tx and rx internal delays | expand

Commit Message

Dan Murphy May 27, 2020, 4:49 p.m. UTC
tx-internal-delays and rx-internal-delays are a common setting for RGMII
capable devices.

These properties are used when the phy-mode or phy-controller is set to
rgmii-id, rgmii-rxid or rgmii-txid.  These modes indicate to the
controller that the PHY will add the internal delay for the connection.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 .../bindings/net/ethernet-controller.yaml          | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index ac471b60ed6a..70702a4ef5e8 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -143,6 +143,20 @@  properties:
       Specifies the PHY management type. If auto is set and fixed-link
       is not specified, it uses MDIO for management.
 
+  rx-internal-delay-ps:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description: |
+      RGMII Receive PHY Clock Delay defined in pico seconds.  This is used for
+      PHY's that have configurable RX internal delays.  This property is only
+      used when the phy-mode or phy-connection-type is rgmii-id or rgmii-rxid.
+
+  tx-internal-delay-ps:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description: |
+      RGMII Transmit PHY Clock Delay defined in pico seconds.  This is used for
+      PHY's that have configurable TX internal delays.  This property is only
+      used when the phy-mode or phy-connection-type is rgmii-id or rgmii-txid.
+
   fixed-link:
     allOf:
       - if: