diff mbox series

[1/2] ARM: dts: Move watchdog from Kontron i.MX6UL/ULL board to SoM

Message ID 20200528144312.25980-1-frieder.schrempf@kontron.de
State New
Headers show
Series [1/2] ARM: dts: Move watchdog from Kontron i.MX6UL/ULL board to SoM | expand

Commit Message

Frieder Schrempf May 28, 2020, 2:43 p.m. UTC
From: Frieder Schrempf <frieder.schrempf@kontron.de>

The watchdog's WDOG_ANY signal is used to trigger a POR of the SoC,
if a soft reset is issued. As the SoM hardware connects the WDOG_ANY
and the POR signals, the watchdog node itself and the pin
configuration should be part of the common SoM devicetree.
Let's move it from the baseboard's devicetree to its proper place.

Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
Cc: stable@vger.kernel.org
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
 arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi       | 13 -------------
 .../boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi   | 13 +++++++++++++
 2 files changed, 13 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
index f05e91841202..53a25fba34f6 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
@@ -232,13 +232,6 @@ 
 	status = "okay";
 };
 
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
 &iomuxc {
 	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
 
@@ -409,10 +402,4 @@ 
 			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
 		>;
 	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY	0x30b0
-		>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
index a17af4d9bfdf..fc316408721d 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -57,6 +57,13 @@ 
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_reset_out>;
@@ -106,4 +113,10 @@ 
 			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
 		>;
 	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
 };