diff mbox

[v2,3/6] xen/arm: gic: Use the correct CPU ID

Message ID 1378900784-16949-4-git-send-email-julien.grall@linaro.org
State Superseded, archived
Headers show

Commit Message

Julien Grall Sept. 11, 2013, 11:59 a.m. UTC
The GIC mapping of CPU interfaces does not necessarily match the logical
CPU numbering.

When Xen wants to send an SGI to specific CPU, it needs to use the GIC CPU ID.
It can be retrieved from ITARGETSR0, in fact when this field is read, the GIC
will return a value that corresponds only to the processor reading the register.
So Xen can use the PPI 0 to initialize the mapping.

Signed-off-by: Julien Grall <julien.grall@linaro.org>

---
    Changes in v2:
        - Use per-cpu variable instead of an array
        - Add comment for NR_GIC_CPU_IF
---
 xen/arch/arm/gic.c |   37 ++++++++++++++++++++++++++++++-------
 1 file changed, 30 insertions(+), 7 deletions(-)

Comments

Ian Campbell Sept. 17, 2013, 2:36 p.m. UTC | #1
On Wed, 2013-09-11 at 12:59 +0100, Julien Grall wrote:
> +static unsigned int gic_cpu_mask(const cpumask_t *cpumask)
> +{
> +    unsigned int cpu;
> +    unsigned int mask = 0;
> +
> +    for_each_cpu(cpu, cpumask)
> +    {
> +        ASSERT(cpu < NR_GIC_CPU_IF);
> +        mask = per_cpu(gic_cpu_id, cpu);

Did you mean for this to be |= or something else?
Julien Grall Sept. 17, 2013, 3:04 p.m. UTC | #2
On 09/17/2013 03:36 PM, Ian Campbell wrote:
> On Wed, 2013-09-11 at 12:59 +0100, Julien Grall wrote:
>> +static unsigned int gic_cpu_mask(const cpumask_t *cpumask)
>> +{
>> +    unsigned int cpu;
>> +    unsigned int mask = 0;
>> +
>> +    for_each_cpu(cpu, cpumask)
>> +    {
>> +        ASSERT(cpu < NR_GIC_CPU_IF);
>> +        mask = per_cpu(gic_cpu_id, cpu);
> 
> Did you mean for this to be |= or something else?

Oh, right. I will update the patch and send it again.
diff mbox

Patch

diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
index a10416d..7ea9ed6 100644
--- a/xen/arch/arm/gic.c
+++ b/xen/arch/arm/gic.c
@@ -57,6 +57,29 @@  static DEFINE_PER_CPU(uint64_t, lr_mask);
 
 static unsigned nr_lrs;
 
+/* The GIC mapping of CPU interfaces does not necessarily match the
+ * logical CPU numbering. Let's use mapping as returned by the GIC
+ * itself
+ */
+static DEFINE_PER_CPU(u8, gic_cpu_id);
+
+/* Maximum cpu interface per GIC */
+#define NR_GIC_CPU_IF 8
+
+static unsigned int gic_cpu_mask(const cpumask_t *cpumask)
+{
+    unsigned int cpu;
+    unsigned int mask = 0;
+
+    for_each_cpu(cpu, cpumask)
+    {
+        ASSERT(cpu < NR_GIC_CPU_IF);
+        mask = per_cpu(gic_cpu_id, cpu);
+    }
+
+    return mask;
+}
+
 unsigned int gic_number_lines(void)
 {
     return gic.lines;
@@ -206,9 +229,7 @@  static void gic_set_irq_properties(unsigned int irq, bool_t level,
 {
     volatile unsigned char *bytereg;
     uint32_t cfg, edgebit;
-    unsigned int mask = cpumask_bits(cpu_mask)[0];
-
-    ASSERT(!(mask & ~0xff)); /* Target bitmap only support 8 CPUS */
+    unsigned int mask = gic_cpu_mask(cpu_mask);
 
     /* Set edge / level */
     cfg = GICD[GICD_ICFGR + irq / 16];
@@ -317,6 +338,8 @@  static void __cpuinit gic_cpu_init(void)
 {
     int i;
 
+    this_cpu(gic_cpu_id) = GICD[GICD_ITARGETSR] & 0xff;
+
     /* The first 32 interrupts (PPI and SGI) are banked per-cpu, so
      * even though they are controlled with GICD registers, they must
      * be set up here with the other per-cpu state. */
@@ -448,13 +471,13 @@  void __init gic_init(void)
 
 void send_SGI_mask(const cpumask_t *cpumask, enum gic_sgi sgi)
 {
-    unsigned long mask = cpumask_bits(cpumask)[0];
+    cpumask_t online_mask;
+    unsigned int mask = 0;
 
     ASSERT(sgi < 16); /* There are only 16 SGIs */
 
-    mask &= cpumask_bits(&cpu_online_map)[0];
-
-    ASSERT(mask < 0x100); /* The target bitmap only supports 8 CPUs */
+    cpumask_and(&online_mask, cpumask, &cpu_online_map);
+    mask = gic_cpu_mask(&online_mask);
 
     dsb();