===================================================================
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Reduced Pin Count Interface (RPC-IF)
+
+maintainers:
+ - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+description: |
+ Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to
+ be accessed via the external address space read mode or the manual mode.
+
+ The flash chip itself should be represented by a subnode of the RPC-IF node.
+ The flash interface is selected based on the "compatible" property of this
+ subnode:
+ - if it contains "jedec,spi-nor", then SPI is used;
+ - if it contains "cfi-flash", then HyperFlash is used.
+
+allOf:
+ - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r8a77970-rpc-if # R-Car V3M
+ - renesas,r8a77980-rpc-if # R-Car V3H
+ - renesas,r8a77995-rpc-if # R-Car D3
+ - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device
+
+ reg:
+ items:
+ - description: RPC-IF registers
+ - description: direct mapping read mode area
+ - description: write buffer area
+
+ reg-names:
+ items:
+ - const: regs
+ - const: dirmap
+ - const: wbuf
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+patternProperties:
+ "flash@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - cfi-flash
+ - jedec,spi-nor
+
+examples:
+ - |
+ #include <dt-bindings/clock/renesas-cpg-mssr.h>
+ #include <dt-bindings/power/r8a77995-sysc.h>
+
+ spi@ee200000 {
+ compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if";
+ reg = <0xee200000 0x200>,
+ <0x08000000 0x4000000>,
+ <0xee208000 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
+ };
+ };
Renesas Reduced Pin Count Interface (RPC-IF) allows a SPI flash or HyperFlash connected to the SoC to be accessed via the external address space read mode or the manual mode. Document the device tree bindings for the Renesas RPC-IF found in the R-Car gen3 SoCs. Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- Changes in version 5: - added R8A77970 to the possible values for the "compatible" prop; - switched to my private email in the "maintainers:" clause. Changes in version 4: - added the SoC name comments to the RPC-IF's "compatible" prop description; - removed a hyphen before 'enum' in the subnode description; - removed leading 0s in the "reg" prop in the example. Changes in version 3: - fixed up the whitespace and added hyphens in the "compatible" prop text, also removed the comments; - specified the subnode name as "flash", and used "enum" in the subnode text; - fixed up the SPDX-License-Identifier: tag. Changes in version 2: - rewrote the bindings in YAML. Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml | 88 ++++++++++ 1 file changed, 88 insertions(+)