diff mbox series

[5/8] arm64: dts: qcom: pm660(l): Add base dts files

Message ID 20200621213806.551879-6-konradybcio@gmail.com
State Superseded
Headers show
Series [1/8] pinctrl: qcom: spmi-gpio: Add pm660(l) compatibility | expand

Commit Message

Konrad Dybcio June 21, 2020, 9:38 p.m. UTC
Add base DTS files for pm660(l) along with GPIOs, power-on and
rtc nodes.

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
 arch/arm64/boot/dts/qcom/pm660.dtsi  | 60 ++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm660l.dtsi | 45 +++++++++++++++++++++
 2 files changed, 105 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm660.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pm660l.dtsi
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
new file mode 100644
index 000000000000..94eca5a1cf0b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -0,0 +1,60 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+&spmi_bus {
+
+	pmic@0 {
+		compatible = "qcom,pm660", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+
+			reg = <0x800>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+		};
+
+		pm660_gpios: gpios@c000 {
+			compatible = "qcom,pm660-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>,
+				     <0 0xc4 0 IRQ_TYPE_NONE>,
+				     <0 0xc5 0 IRQ_TYPE_NONE>,
+				     <0 0xc6 0 IRQ_TYPE_NONE>,
+				     <0 0xc7 0 IRQ_TYPE_NONE>,
+				     <0 0xc8 0 IRQ_TYPE_NONE>,
+				     <0 0xc9 0 IRQ_TYPE_NONE>,
+				     <0 0xca 0 IRQ_TYPE_NONE>,
+				     <0 0xcb 0 IRQ_TYPE_NONE>,
+				     <0 0xcc 0 IRQ_TYPE_NONE>;
+		};
+    };
+};
diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
new file mode 100644
index 000000000000..6de56b220c56
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -0,0 +1,45 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+&spmi_bus {
+
+	pmic@2 {
+		compatible = "qcom,pm660l", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm660l_gpios: gpios@c000 {
+			compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>,
+					 <0x2 0xc1 0x0 IRQ_TYPE_NONE>,
+					 <0x2 0xc2 0x0 IRQ_TYPE_NONE>,
+					 <0x2 0xc3 0x0 IRQ_TYPE_NONE>,
+					 <0x2 0xc4 0x0 IRQ_TYPE_NONE>,
+					 <0x2 0xc5 0x0 IRQ_TYPE_NONE>,
+					 <0x2 0xc6 0x0 IRQ_TYPE_NONE>,
+					 <0x2 0xc7 0x0 IRQ_TYPE_NONE>,
+					 <0x2 0xc8 0x0 IRQ_TYPE_NONE>,
+					 <0x2 0xc9 0x0 IRQ_TYPE_NONE>,
+					 <0x2 0xca 0x0 IRQ_TYPE_NONE>,
+					 <0x2 0xcb 0x0 IRQ_TYPE_NONE>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pm660l", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
\ No newline at end of file