@@ -198,14 +198,11 @@ int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable)
}
EXPORT_SYMBOL(st_sensors_set_axis_enable);
-int st_sensors_init_sensor(struct iio_dev *indio_dev,
- struct st_sensors_platform_data *pdata)
+int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *pdata)
{
- int err;
struct st_sensor_data *sdata = iio_priv(indio_dev);
- mutex_init(&sdata->tb.buf_lock);
-
switch (pdata->drdy_int_pin) {
case 1:
if (sdata->sensor->drdy_irq.mask_int1 == 0) {
@@ -228,6 +225,20 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
return -EINVAL;
}
+ return 0;
+}
+
+int st_sensors_init_sensor(struct iio_dev *indio_dev,
+ struct st_sensors_platform_data *pdata)
+{
+ int err = 0;
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+ mutex_init(&sdata->tb.buf_lock);
+
+ if (pdata)
+ err = st_sensors_set_drdy_int_pin(indio_dev, pdata);
+
err = st_sensors_set_enable(indio_dev, false);
if (err < 0)
return err;
@@ -262,6 +273,9 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
u8 drdy_mask;
struct st_sensor_data *sdata = iio_priv(indio_dev);
+ if (!sdata->sensor->drdy_irq.addr)
+ return 0;
+
/* Enable/Disable the interrupt generator 1. */
if (sdata->sensor->drdy_irq.ig1.en_addr > 0) {
err = st_sensors_write_data_with_mask(indio_dev,
@@ -377,7 +377,8 @@ int st_press_common_probe(struct iio_dev *indio_dev,
pdata->odr = pdata->sensor->odr.odr_avl[0].hz;
- if (!plat_data)
+ /* Some devices don't support a data ready pin. */
+ if (!plat_data && pdata->sensor->drdy_irq.addr)
plat_data =
(struct st_sensors_platform_data *)&default_press_pdata;
Not all ST's sensors support data ready, so let's make the declaration of one conditional. Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/iio/common/st_sensors/st_sensors_core.c | 24 +++++++++++++++++++----- drivers/iio/pressure/st_pressure_core.c | 3 ++- 2 files changed, 21 insertions(+), 6 deletions(-)