diff mbox series

[5.7,293/477] ARM: davinci: fix build failure without I2C

Message ID 20200623195421.408089839@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH June 23, 2020, 7:54 p.m. UTC 
From: Arnd Bergmann <arnd@arndb.de>


[ Upstream commit 147922f91965e734664374a3f226adfeaa586d72 ]

The two supplies are referenced outside of #ifdef CONFIG_I2C but
defined inside, which breaks the build if that is not built-in:

mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
                                     ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
                                                ^
mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
mach-davinci/board-dm644x-evm.c:860:49: error: use of undeclared identifier 'fixed_supplies_1_8v'
        regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,

I don't know if the regulators are used anywhere without I2C, but
always registering them seems to be the safe choice here.

On a related note, it might be best to also deal with CONFIG_I2C=m
across the file, unless this is going to be moved to DT and removed
really soon anyway.

Link: https://lore.kernel.org/r/20200527133746.643895-1-arnd@arndb.de
Fixes: 5e06d19694a4 ("ARM: davinci: dm644x-evm: Add Fixed regulators needed for tlv320aic33")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Signed-off-by: Sasha Levin <sashal@kernel.org>

---
 arch/arm/mach-davinci/board-dm644x-evm.c | 26 ++++++++++++------------
 1 file changed, 13 insertions(+), 13 deletions(-)

-- 
2.25.1
diff mbox series

Patch

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 3461d12bbfc06..a5d3708fedf68 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -655,19 +655,6 @@  static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 };
 
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
-	/* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */
-	REGULATOR_SUPPLY("AVDD", "1-001b"),
-	REGULATOR_SUPPLY("DRVDD", "1-001b"),
-};
-
-static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
-	/* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */
-	REGULATOR_SUPPLY("IOVDD", "1-001b"),
-	REGULATOR_SUPPLY("DVDD", "1-001b"),
-};
-
 #define DM644X_I2C_SDA_PIN	GPIO_TO_PIN(2, 12)
 #define DM644X_I2C_SCL_PIN	GPIO_TO_PIN(2, 11)
 
@@ -700,6 +687,19 @@  static void __init evm_init_i2c(void)
 }
 #endif
 
+/* Fixed regulator support */
+static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
+	/* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */
+	REGULATOR_SUPPLY("AVDD", "1-001b"),
+	REGULATOR_SUPPLY("DRVDD", "1-001b"),
+};
+
+static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
+	/* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */
+	REGULATOR_SUPPLY("IOVDD", "1-001b"),
+	REGULATOR_SUPPLY("DVDD", "1-001b"),
+};
+
 #define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
 
 /* venc standard timings */