diff mbox series

[1/3] arm64: dts: qcom: pm8009: Add base dts file

Message ID 20200621192824.2069145-1-dmitry.baryshkov@linaro.org
State Accepted
Commit 380af2b7d1e2102529b26594083ed198cfb08548
Headers show
Series [1/3] arm64: dts: qcom: pm8009: Add base dts file | expand

Commit Message

Dmitry Baryshkov June 21, 2020, 7:28 p.m. UTC 
Add base DTS file for pm8009 along with GPIOs and power-on nodes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

---
 arch/arm64/boot/dts/qcom/pm8009.dtsi | 37 ++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm8009.dtsi

-- 
2.27.0
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8009.dtsi b/arch/arm64/boot/dts/qcom/pm8009.dtsi
new file mode 100644
index 000000000000..cb1a10e72474
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8009.dtsi
@@ -0,0 +1,37 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@a {
+		compatible = "qcom,pm8009", "qcom,spmi-pmic";
+		reg = <0xa SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+		};
+
+		pm8009_gpios: gpio@c000 {
+			compatible = "qcom,pm8005-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@b {
+		compatible = "qcom,pm8009", "qcom,spmi-pmic";
+		reg = <0xb SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};