diff mbox series

[v9,04/10] configure: Generate rule to calculate the base architecture of a target

Message ID 20200618123342.10693-5-philmd@redhat.com
State New
Headers show
Series accel: Allow targets to use Kconfig | expand

Commit Message

Philippe Mathieu-Daudé June 18, 2020, 12:33 p.m. UTC
From: Alex Bennée <alex.bennee@linaro.org>


As we encode the base architecture in configure.sh, we can emit
the base-arch() function into config-host.mak.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

---
 configure | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

-- 
2.21.3

Comments

Philippe Mathieu-Daudé June 19, 2020, 11:08 a.m. UTC | #1
On 6/18/20 2:33 PM, Philippe Mathieu-Daudé wrote:
> From: Alex Bennée <alex.bennee@linaro.org>

> 

> As we encode the base architecture in configure.sh, we can emit

> the base-arch() function into config-host.mak.

> 

> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>


I'm not sure it is implicit by the S-o-b tag following, so:

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>


> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

> ---

>  configure | 19 +++++++++++++++++++

>  1 file changed, 19 insertions(+)

> 

> diff --git a/configure b/configure

> index ba88fd1824..c0d7fbc30e 100755

> --- a/configure

> +++ b/configure

> @@ -7927,6 +7927,8 @@ if test "$linux" = "yes" ; then

>      fi

>  fi

>  

> +target_to_base_map=""

> +

>  for target in $target_list; do

>  target_dir="$target"

>  config_target_mak=$target_dir/config-target.mak

> @@ -8155,6 +8157,7 @@ target_arch_name="$(upper $TARGET_ARCH)"

>  echo "TARGET_$target_arch_name=y" >> $config_target_mak

>  echo "TARGET_NAME=$target_name" >> $config_target_mak

>  echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak

> +target_to_base_map="$target_dir,$TARGET_BASE_ARCH $target_to_base_map"

>  if [ "$TARGET_ABI_DIR" = "" ]; then

>    TARGET_ABI_DIR=$TARGET_ARCH

>  fi

> @@ -8370,6 +8373,22 @@ if test "$ccache_cpp2" = "yes"; then

>    echo "export CCACHE_CPP2=y" >> $config_host_mak

>  fi

>  

> +# Export a rule for calculating base arch from target_dir for use by

> +# the Kconfig generator

> +echo "# Usage: \$(call base-arch, target-dir)" >> $config_host_mak

> +echo "# Return the base architecture for a target." >> $config_host_mak

> +echo "# e.g \$(call base-arch, aarch64-linux-user) returns 'arm'" >> $config_host_mak

> +echo "base-arch = \$(strip \\" >> $config_host_mak

> +close_braces=""

> +for pairs in $target_to_base_map

> +do

> +    dir="${pairs%%,*}"

> +    base="${pairs#*,}"

> +    echo "\$(if \$(findstring $dir,\$1),$base, \\" >> $config_host_mak

> +    close_braces="$close_braces )"

> +done

> +echo "$close_braces )" >> $config_host_mak

> +

>  # If we're using a separate build tree, set it up now.

>  # DIRS are directories which we simply mkdir in the build tree;

>  # LINKS are things to symlink back into the source tree

>
Claudio Fontana June 23, 2020, 8:01 a.m. UTC | #2
Hi Philippe, Alex,

On 6/18/20 2:33 PM, Philippe Mathieu-Daudé wrote:
> From: Alex Bennée <alex.bennee@linaro.org>

> 

> As we encode the base architecture in configure.sh, we can emit

> the base-arch() function into config-host.mak.

> 

> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>


I found this change a bit strange, but maybe I am missing some context.

Would it not be easier to read the information from the
config-target.mak files as it is already emitted there?

Ciao,

Claudio


> ---

>  configure | 19 +++++++++++++++++++

>  1 file changed, 19 insertions(+)

> 

> diff --git a/configure b/configure

> index ba88fd1824..c0d7fbc30e 100755

> --- a/configure

> +++ b/configure

> @@ -7927,6 +7927,8 @@ if test "$linux" = "yes" ; then

>      fi

>  fi

>  

> +target_to_base_map=""

> +

>  for target in $target_list; do

>  target_dir="$target"

>  config_target_mak=$target_dir/config-target.mak

> @@ -8155,6 +8157,7 @@ target_arch_name="$(upper $TARGET_ARCH)"

>  echo "TARGET_$target_arch_name=y" >> $config_target_mak

>  echo "TARGET_NAME=$target_name" >> $config_target_mak

>  echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak

> +target_to_base_map="$target_dir,$TARGET_BASE_ARCH $target_to_base_map"

>  if [ "$TARGET_ABI_DIR" = "" ]; then

>    TARGET_ABI_DIR=$TARGET_ARCH

>  fi

> @@ -8370,6 +8373,22 @@ if test "$ccache_cpp2" = "yes"; then

>    echo "export CCACHE_CPP2=y" >> $config_host_mak

>  fi

>  

> +# Export a rule for calculating base arch from target_dir for use by

> +# the Kconfig generator

> +echo "# Usage: \$(call base-arch, target-dir)" >> $config_host_mak

> +echo "# Return the base architecture for a target." >> $config_host_mak

> +echo "# e.g \$(call base-arch, aarch64-linux-user) returns 'arm'" >> $config_host_mak

> +echo "base-arch = \$(strip \\" >> $config_host_mak

> +close_braces=""

> +for pairs in $target_to_base_map

> +do

> +    dir="${pairs%%,*}"

> +    base="${pairs#*,}"

> +    echo "\$(if \$(findstring $dir,\$1),$base, \\" >> $config_host_mak

> +    close_braces="$close_braces )"

> +done

> +echo "$close_braces )" >> $config_host_mak

> +

>  # If we're using a separate build tree, set it up now.

>  # DIRS are directories which we simply mkdir in the build tree;

>  # LINKS are things to symlink back into the source tree

>
Philippe Mathieu-Daudé June 23, 2020, 8:45 a.m. UTC | #3
On 6/23/20 10:01 AM, Claudio Fontana wrote:
> Hi Philippe, Alex,

> 

> On 6/18/20 2:33 PM, Philippe Mathieu-Daudé wrote:

>> From: Alex Bennée <alex.bennee@linaro.org>

>>

>> As we encode the base architecture in configure.sh, we can emit

>> the base-arch() function into config-host.mak.

>>

>> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

> 

> I found this change a bit strange, but maybe I am missing some context.


This is used in patch 9:
"Makefile: Allow target-specific optional Kconfig"
https://www.mail-archive.com/qemu-devel@nongnu.org/msg713823.html

> 

> Would it not be easier to read the information from the

> config-target.mak files as it is already emitted there?


So you are suggesting moving the SUBDIR_DEVICES_MAK creation code
to Makefile.target, before until now it is target-agnostic but we
are making it target-specific. Yes, it could work...

I keep respining this series since the semihosting rework. Frankly
I don't remember why it became so complicated, I need to jump into
the code again.

I guess when Paolo introduced Kconfig, the accelerator configs were
almost static, so SUBDIR_DEVICES_MAK was only dependent of host
config.

The semihosting "device" depends of accelerator and target configs.

Maybe the problem is to see minikconf generating device selectors,
as kconfig is also used for generic features (such accelerator,
not really "device").

> 

> Ciao,

> 

> Claudio

> 

> 

>> ---

>>  configure | 19 +++++++++++++++++++

>>  1 file changed, 19 insertions(+)

>>

>> diff --git a/configure b/configure

>> index ba88fd1824..c0d7fbc30e 100755

>> --- a/configure

>> +++ b/configure

>> @@ -7927,6 +7927,8 @@ if test "$linux" = "yes" ; then

>>      fi

>>  fi

>>  

>> +target_to_base_map=""

>> +

>>  for target in $target_list; do

>>  target_dir="$target"

>>  config_target_mak=$target_dir/config-target.mak

>> @@ -8155,6 +8157,7 @@ target_arch_name="$(upper $TARGET_ARCH)"

>>  echo "TARGET_$target_arch_name=y" >> $config_target_mak

>>  echo "TARGET_NAME=$target_name" >> $config_target_mak

>>  echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak

>> +target_to_base_map="$target_dir,$TARGET_BASE_ARCH $target_to_base_map"

>>  if [ "$TARGET_ABI_DIR" = "" ]; then

>>    TARGET_ABI_DIR=$TARGET_ARCH

>>  fi

>> @@ -8370,6 +8373,22 @@ if test "$ccache_cpp2" = "yes"; then

>>    echo "export CCACHE_CPP2=y" >> $config_host_mak

>>  fi

>>  

>> +# Export a rule for calculating base arch from target_dir for use by

>> +# the Kconfig generator

>> +echo "# Usage: \$(call base-arch, target-dir)" >> $config_host_mak

>> +echo "# Return the base architecture for a target." >> $config_host_mak

>> +echo "# e.g \$(call base-arch, aarch64-linux-user) returns 'arm'" >> $config_host_mak

>> +echo "base-arch = \$(strip \\" >> $config_host_mak

>> +close_braces=""

>> +for pairs in $target_to_base_map

>> +do

>> +    dir="${pairs%%,*}"

>> +    base="${pairs#*,}"

>> +    echo "\$(if \$(findstring $dir,\$1),$base, \\" >> $config_host_mak

>> +    close_braces="$close_braces )"

>> +done

>> +echo "$close_braces )" >> $config_host_mak

>> +

>>  # If we're using a separate build tree, set it up now.

>>  # DIRS are directories which we simply mkdir in the build tree;

>>  # LINKS are things to symlink back into the source tree

>>

>
Philippe Mathieu-Daudé June 23, 2020, 1:17 p.m. UTC | #4
On 6/23/20 10:45 AM, Philippe Mathieu-Daudé wrote:
> On 6/23/20 10:01 AM, Claudio Fontana wrote:

>> Hi Philippe, Alex,

>>

>> On 6/18/20 2:33 PM, Philippe Mathieu-Daudé wrote:

>>> From: Alex Bennée <alex.bennee@linaro.org>

>>>

>>> As we encode the base architecture in configure.sh, we can emit

>>> the base-arch() function into config-host.mak.

>>>

>>> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

>>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

>>

>> I found this change a bit strange, but maybe I am missing some context.

> 

> This is used in patch 9:

> "Makefile: Allow target-specific optional Kconfig"

> https://www.mail-archive.com/qemu-devel@nongnu.org/msg713823.html

> 

>>

>> Would it not be easier to read the information from the

>> config-target.mak files as it is already emitted there?

> 

> So you are suggesting moving the SUBDIR_DEVICES_MAK creation code

> to Makefile.target, before until now it is target-agnostic but we

> are making it target-specific. Yes, it could work...

> 

> I keep respining this series since the semihosting rework. Frankly

> I don't remember why it became so complicated, I need to jump into

> the code again.

> 

> I guess when Paolo introduced Kconfig, the accelerator configs were

> almost static, so SUBDIR_DEVICES_MAK was only dependent of host

> config.

> 

> The semihosting "device" depends of accelerator and target configs.

> 

> Maybe the problem is to see minikconf generating device selectors,

> as kconfig is also used for generic features (such accelerator,

> not really "device").


This might be solved easily using Meson... Maybe better wait for it?

>

>>

>>> ---

>>>  configure | 19 +++++++++++++++++++

>>>  1 file changed, 19 insertions(+)

>>>

>>> diff --git a/configure b/configure

>>> index ba88fd1824..c0d7fbc30e 100755

>>> --- a/configure

>>> +++ b/configure

>>> @@ -7927,6 +7927,8 @@ if test "$linux" = "yes" ; then

>>>      fi

>>>  fi

>>>  

>>> +target_to_base_map=""

>>> +

>>>  for target in $target_list; do

>>>  target_dir="$target"

>>>  config_target_mak=$target_dir/config-target.mak

>>> @@ -8155,6 +8157,7 @@ target_arch_name="$(upper $TARGET_ARCH)"

>>>  echo "TARGET_$target_arch_name=y" >> $config_target_mak

>>>  echo "TARGET_NAME=$target_name" >> $config_target_mak

>>>  echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak

>>> +target_to_base_map="$target_dir,$TARGET_BASE_ARCH $target_to_base_map"

>>>  if [ "$TARGET_ABI_DIR" = "" ]; then

>>>    TARGET_ABI_DIR=$TARGET_ARCH

>>>  fi

>>> @@ -8370,6 +8373,22 @@ if test "$ccache_cpp2" = "yes"; then

>>>    echo "export CCACHE_CPP2=y" >> $config_host_mak

>>>  fi

>>>  

>>> +# Export a rule for calculating base arch from target_dir for use by

>>> +# the Kconfig generator

>>> +echo "# Usage: \$(call base-arch, target-dir)" >> $config_host_mak

>>> +echo "# Return the base architecture for a target." >> $config_host_mak

>>> +echo "# e.g \$(call base-arch, aarch64-linux-user) returns 'arm'" >> $config_host_mak

>>> +echo "base-arch = \$(strip \\" >> $config_host_mak

>>> +close_braces=""

>>> +for pairs in $target_to_base_map

>>> +do

>>> +    dir="${pairs%%,*}"

>>> +    base="${pairs#*,}"

>>> +    echo "\$(if \$(findstring $dir,\$1),$base, \\" >> $config_host_mak

>>> +    close_braces="$close_braces )"

>>> +done

>>> +echo "$close_braces )" >> $config_host_mak

>>> +

>>>  # If we're using a separate build tree, set it up now.

>>>  # DIRS are directories which we simply mkdir in the build tree;

>>>  # LINKS are things to symlink back into the source tree

>>>

>>

>
Claudio Fontana June 25, 2020, 8:45 a.m. UTC | #5
On 6/23/20 3:17 PM, Philippe Mathieu-Daudé wrote:
> On 6/23/20 10:45 AM, Philippe Mathieu-Daudé wrote:

>> On 6/23/20 10:01 AM, Claudio Fontana wrote:

>>> Hi Philippe, Alex,

>>>

>>> On 6/18/20 2:33 PM, Philippe Mathieu-Daudé wrote:

>>>> From: Alex Bennée <alex.bennee@linaro.org>

>>>>

>>>> As we encode the base architecture in configure.sh, we can emit

>>>> the base-arch() function into config-host.mak.

>>>>

>>>> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

>>>> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

>>>

>>> I found this change a bit strange, but maybe I am missing some context.

>>

>> This is used in patch 9:

>> "Makefile: Allow target-specific optional Kconfig"

>> https://www.mail-archive.com/qemu-devel@nongnu.org/msg713823.html

>>

>>>

>>> Would it not be easier to read the information from the

>>> config-target.mak files as it is already emitted there?

>>

>> So you are suggesting moving the SUBDIR_DEVICES_MAK creation code

>> to Makefile.target, before until now it is target-agnostic but we

>> are making it target-specific. Yes, it could work...

>>

>> I keep respining this series since the semihosting rework. Frankly

>> I don't remember why it became so complicated, I need to jump into

>> the code again.

>>

>> I guess when Paolo introduced Kconfig, the accelerator configs were

>> almost static, so SUBDIR_DEVICES_MAK was only dependent of host

>> config.

>>

>> The semihosting "device" depends of accelerator and target configs.

>>

>> Maybe the problem is to see minikconf generating device selectors,

>> as kconfig is also used for generic features (such accelerator,

>> not really "device").


I think you are right, some of the features are not devices. Maybe another variable could
hold the target-specific features, getting the input from the target makefile? hmm...

> 

> This might be solved easily using Meson... Maybe better wait for it?


Not sure about this one, should be possible to solve with makefiles also,
but I didn't try; I'll try to set things up to get a better understanding.

Ciao,

Claudio

> 

>>

>>>

>>>> ---

>>>>  configure | 19 +++++++++++++++++++

>>>>  1 file changed, 19 insertions(+)

>>>>

>>>> diff --git a/configure b/configure

>>>> index ba88fd1824..c0d7fbc30e 100755

>>>> --- a/configure

>>>> +++ b/configure

>>>> @@ -7927,6 +7927,8 @@ if test "$linux" = "yes" ; then

>>>>      fi

>>>>  fi

>>>>  

>>>> +target_to_base_map=""

>>>> +

>>>>  for target in $target_list; do

>>>>  target_dir="$target"

>>>>  config_target_mak=$target_dir/config-target.mak

>>>> @@ -8155,6 +8157,7 @@ target_arch_name="$(upper $TARGET_ARCH)"

>>>>  echo "TARGET_$target_arch_name=y" >> $config_target_mak

>>>>  echo "TARGET_NAME=$target_name" >> $config_target_mak

>>>>  echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak

>>>> +target_to_base_map="$target_dir,$TARGET_BASE_ARCH $target_to_base_map"

>>>>  if [ "$TARGET_ABI_DIR" = "" ]; then

>>>>    TARGET_ABI_DIR=$TARGET_ARCH

>>>>  fi

>>>> @@ -8370,6 +8373,22 @@ if test "$ccache_cpp2" = "yes"; then

>>>>    echo "export CCACHE_CPP2=y" >> $config_host_mak

>>>>  fi

>>>>  

>>>> +# Export a rule for calculating base arch from target_dir for use by

>>>> +# the Kconfig generator

>>>> +echo "# Usage: \$(call base-arch, target-dir)" >> $config_host_mak

>>>> +echo "# Return the base architecture for a target." >> $config_host_mak

>>>> +echo "# e.g \$(call base-arch, aarch64-linux-user) returns 'arm'" >> $config_host_mak

>>>> +echo "base-arch = \$(strip \\" >> $config_host_mak

>>>> +close_braces=""

>>>> +for pairs in $target_to_base_map

>>>> +do

>>>> +    dir="${pairs%%,*}"

>>>> +    base="${pairs#*,}"

>>>> +    echo "\$(if \$(findstring $dir,\$1),$base, \\" >> $config_host_mak

>>>> +    close_braces="$close_braces )"

>>>> +done

>>>> +echo "$close_braces )" >> $config_host_mak

>>>> +

>>>>  # If we're using a separate build tree, set it up now.

>>>>  # DIRS are directories which we simply mkdir in the build tree;

>>>>  # LINKS are things to symlink back into the source tree

>>>>

>>>

>>

>
diff mbox series

Patch

diff --git a/configure b/configure
index ba88fd1824..c0d7fbc30e 100755
--- a/configure
+++ b/configure
@@ -7927,6 +7927,8 @@  if test "$linux" = "yes" ; then
     fi
 fi
 
+target_to_base_map=""
+
 for target in $target_list; do
 target_dir="$target"
 config_target_mak=$target_dir/config-target.mak
@@ -8155,6 +8157,7 @@  target_arch_name="$(upper $TARGET_ARCH)"
 echo "TARGET_$target_arch_name=y" >> $config_target_mak
 echo "TARGET_NAME=$target_name" >> $config_target_mak
 echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak
+target_to_base_map="$target_dir,$TARGET_BASE_ARCH $target_to_base_map"
 if [ "$TARGET_ABI_DIR" = "" ]; then
   TARGET_ABI_DIR=$TARGET_ARCH
 fi
@@ -8370,6 +8373,22 @@  if test "$ccache_cpp2" = "yes"; then
   echo "export CCACHE_CPP2=y" >> $config_host_mak
 fi
 
+# Export a rule for calculating base arch from target_dir for use by
+# the Kconfig generator
+echo "# Usage: \$(call base-arch, target-dir)" >> $config_host_mak
+echo "# Return the base architecture for a target." >> $config_host_mak
+echo "# e.g \$(call base-arch, aarch64-linux-user) returns 'arm'" >> $config_host_mak
+echo "base-arch = \$(strip \\" >> $config_host_mak
+close_braces=""
+for pairs in $target_to_base_map
+do
+    dir="${pairs%%,*}"
+    base="${pairs#*,}"
+    echo "\$(if \$(findstring $dir,\$1),$base, \\" >> $config_host_mak
+    close_braces="$close_braces )"
+done
+echo "$close_braces )" >> $config_host_mak
+
 # If we're using a separate build tree, set it up now.
 # DIRS are directories which we simply mkdir in the build tree;
 # LINKS are things to symlink back into the source tree