| Message ID | 20200617182019.6790-2-dmurphy@ti.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [net-next,v7,1/6] dt-bindings: net: Add tx and rx internal delays | expand |
On Wed, Jun 17, 2020 at 01:20:14PM -0500, Dan Murphy wrote: > tx-internal-delays and rx-internal-delays are a common setting for RGMII > capable devices. > > These properties are used when the phy-mode or phy-controller is set to > rgmii-id, rgmii-rxid or rgmii-txid. These modes indicate to the > controller that the PHY will add the internal delay for the connection. > > Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
On Wed, Jun 17, 2020 at 01:20:14PM -0500, Dan Murphy wrote: > tx-internal-delays and rx-internal-delays are a common setting for RGMII > capable devices. > > These properties are used when the phy-mode or phy-controller is set to > rgmii-id, rgmii-rxid or rgmii-txid. These modes indicate to the > controller that the PHY will add the internal delay for the connection. > > Signed-off-by: Dan Murphy <dmurphy@ti.com> > --- > .../devicetree/bindings/net/ethernet-phy.yaml | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml > index 9b1f1147ca36..b2887476fe6a 100644 > --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml > +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml > @@ -162,6 +162,17 @@ properties: > description: > Specifies a reference to a node representing a SFP cage. > > + > + rx-internal-delay-ps: > + description: | > + RGMII Receive PHY Clock Delay defined in pico seconds. This is used for > + PHY's that have configurable RX internal delays. > + > + tx-internal-delay-ps: > + description: | > + RGMII Transmit PHY Clock Delay defined in pico seconds. This is used for > + PHY's that have configurable TX internal delays. > + So in a later patch you have: default: 2000 That seems to apply that these values only apply when the phy mode indicates a delay is needed. It would be good to document that here, when each of these properties will be used. Also, that they default to 2000 when not present. Andrew
Andrew On 6/17/20 9:01 PM, Andrew Lunn wrote: > On Wed, Jun 17, 2020 at 01:20:14PM -0500, Dan Murphy wrote: >> tx-internal-delays and rx-internal-delays are a common setting for RGMII >> capable devices. >> >> These properties are used when the phy-mode or phy-controller is set to >> rgmii-id, rgmii-rxid or rgmii-txid. These modes indicate to the >> controller that the PHY will add the internal delay for the connection. >> >> Signed-off-by: Dan Murphy <dmurphy@ti.com> >> --- >> .../devicetree/bindings/net/ethernet-phy.yaml | 11 +++++++++++ >> 1 file changed, 11 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml >> index 9b1f1147ca36..b2887476fe6a 100644 >> --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml >> +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml >> @@ -162,6 +162,17 @@ properties: >> description: >> Specifies a reference to a node representing a SFP cage. >> >> + >> + rx-internal-delay-ps: >> + description: | >> + RGMII Receive PHY Clock Delay defined in pico seconds. This is used for >> + PHY's that have configurable RX internal delays. >> + >> + tx-internal-delay-ps: >> + description: | >> + RGMII Transmit PHY Clock Delay defined in pico seconds. This is used for >> + PHY's that have configurable TX internal delays. >> + > So in a later patch you have: > > default: 2000 > > That seems to apply that these values only apply when the phy mode > indicates a delay is needed. It would be good to document that here, > when each of these properties will be used. Also, that they default to > 2000 when not present. The default of 2000ps is for the DP83869 only. The DP83822 fixed delay is 3500ps. So indicating that the default here is 2000ps for all devices is not correct. But I can add a note that if these properties are present then the delay is added by the PHY. Dan > Andrew
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 9b1f1147ca36..b2887476fe6a 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -162,6 +162,17 @@ properties: description: Specifies a reference to a node representing a SFP cage. + + rx-internal-delay-ps: + description: | + RGMII Receive PHY Clock Delay defined in pico seconds. This is used for + PHY's that have configurable RX internal delays. + + tx-internal-delay-ps: + description: | + RGMII Transmit PHY Clock Delay defined in pico seconds. This is used for + PHY's that have configurable TX internal delays. + required: - reg
tx-internal-delays and rx-internal-delays are a common setting for RGMII capable devices. These properties are used when the phy-mode or phy-controller is set to rgmii-id, rgmii-rxid or rgmii-txid. These modes indicate to the controller that the PHY will add the internal delay for the connection. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- .../devicetree/bindings/net/ethernet-phy.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+) -- 2.26.2