@@ -64,6 +64,10 @@
#define DP83869_RGMII_TX_CLK_DELAY_EN BIT(1)
#define DP83869_RGMII_RX_CLK_DELAY_EN BIT(0)
+/* RGMIIDCTL */
+#define DP83869_RGMII_CLK_DELAY_SHIFT 4
+#define DP83869_CLK_DELAY_DEF 7
+
/* STRAP_STS1 bits */
#define DP83869_STRAP_OP_MODE_MASK GENMASK(2, 0)
#define DP83869_STRAP_STS1_RESERVED BIT(11)
@@ -78,9 +82,6 @@
#define DP83869_PHYCR_FIFO_DEPTH_MASK GENMASK(15, 12)
#define DP83869_PHYCR_RESERVED_MASK BIT(11)
-/* RGMIIDCTL bits */
-#define DP83869_RGMII_TX_CLK_DELAY_SHIFT 4
-
/* IO_MUX_CFG bits */
#define DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL 0x1f
@@ -99,6 +100,10 @@
#define DP83869_OP_MODE_MII BIT(5)
#define DP83869_SGMII_RGMII_BRIDGE BIT(6)
+static const int dp83869_internal_delay[] = {250, 500, 750, 1000, 1250, 1500,
+ 1750, 2000, 2250, 2500, 2750, 3000,
+ 3250, 3500, 3750, 4000};
+
enum {
DP83869_PORT_MIRRORING_KEEP,
DP83869_PORT_MIRRORING_EN,
@@ -108,6 +113,8 @@ enum {
struct dp83869_private {
int tx_fifo_depth;
int rx_fifo_depth;
+ s32 rx_int_delay;
+ s32 tx_int_delay;
int io_impedance;
int port_mirroring;
bool rxctrl_strap_quirk;
@@ -182,6 +189,7 @@ static int dp83869_of_init(struct phy_device *phydev)
struct dp83869_private *dp83869 = phydev->priv;
struct device *dev = &phydev->mdio.dev;
struct device_node *of_node = dev->of_node;
+ int delay_size = ARRAY_SIZE(dp83869_internal_delay);
int ret;
if (!of_node)
@@ -235,6 +243,20 @@ static int dp83869_of_init(struct phy_device *phydev)
&dp83869->tx_fifo_depth))
dp83869->tx_fifo_depth = DP83869_PHYCR_FIFO_DEPTH_4_B_NIB;
+ dp83869->rx_int_delay = phy_get_internal_delay(phydev, dev,
+ &dp83869_internal_delay[0],
+ delay_size, true);
+ if (dp83869->rx_int_delay < 0)
+ dp83869->rx_int_delay =
+ dp83869_internal_delay[DP83869_CLK_DELAY_DEF];
+
+ dp83869->tx_int_delay = phy_get_internal_delay(phydev, dev,
+ &dp83869_internal_delay[0],
+ delay_size, false);
+ if (dp83869->tx_int_delay < 0)
+ dp83869->tx_int_delay =
+ dp83869_internal_delay[DP83869_CLK_DELAY_DEF];
+
return ret;
}
#else
@@ -397,6 +419,31 @@ static int dp83869_config_init(struct phy_device *phydev)
dp83869->clk_output_sel <<
DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT);
+ if (phy_interface_is_rgmii(phydev)) {
+ ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIIDCTL,
+ dp83869->rx_int_delay |
+ dp83869->tx_int_delay << DP83869_RGMII_CLK_DELAY_SHIFT);
+ if (ret)
+ return ret;
+
+ val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIICTL);
+ val &= ~(DP83869_RGMII_TX_CLK_DELAY_EN |
+ DP83869_RGMII_RX_CLK_DELAY_EN);
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ val |= (DP83869_RGMII_TX_CLK_DELAY_EN |
+ DP83869_RGMII_RX_CLK_DELAY_EN);
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ val |= DP83869_RGMII_TX_CLK_DELAY_EN;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ val |= DP83869_RGMII_RX_CLK_DELAY_EN;
+
+ ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIICTL,
+ val);
+ }
+
return ret;
}
Add RGMII internal delay configuration for Rx and Tx. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- drivers/net/phy/dp83869.c | 53 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 50 insertions(+), 3 deletions(-) -- 2.26.2