| Message ID | 1376120256-9244-7-git-send-email-manjunath.goudar@linaro.org |
|---|---|
| State | New |
| Headers | show |
Hi Manjunath, On Saturday 10 of August 2013 13:07:36 Manjunath Goudar wrote: > Separate the Samsung OHCI S3CXXXX host controller driver from ohci-hcd > host code so that it can be built as a separate driver module. > This work is part of enabling multi-platform kernels on ARM; > it would be nice to have in 3.12. > > Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> > Signed-off-by: Deepak Saxena <dsaxena@linaro.org> > Acked-by: Alan Stern <stern@rowland.harvard.edu> > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: Greg KH <greg@kroah.com> > Cc: linux-usb@vger.kernel.org > > V2: > -Set non-standard fields in ohci_s3c2410_hc_driver manually, rather > than relying on an expanded struct ohci_driver_overrides. > -Save orig_ohci_hub_control and orig_ohci_hub_status_data rather than > relying on ohci_hub_control and hub_status_data being exported. > > V3: > -Kconfig wrong parentheses discription fixed. > -ohci_setup() has been removed because it is called in .reset member > of the ohci_hc_driver structure. > > V4: > - Removed extra space before the '='. > - Moved /* forward definitions */ line before the declarations of > functions. --- > drivers/usb/host/Kconfig | 8 +++ > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ohci-hcd.c | 18 ------ > drivers/usb/host/ohci-s3c2410.c | 128 > +++++++++++++++++---------------------- 4 files changed, 66 > insertions(+), 89 deletions(-) > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index 693560a..795d14d 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -390,6 +390,14 @@ config USB_OHCI_HCD_SPEAR > Enables support for the on-chip OHCI controller on > ST SPEAr chips. > > +config USB_OHCI_HCD_S3CXXXX > + tristate "Support for S3CXXXX on-chip OHCI USB controller" As far as I remember, you were supposed to keep the original name of this driver, as I suggested in previous iteration of this patch and you agreed. S3CXXXX is totally confusing when it's about Samsung SoC naming. So here the config entry would be USB_OHCI_HCD_S3C2410 and I would call it "OHCI support for Samsung S3C24xx/S3C64xx SoC series". > + depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX) > + default y > + ---help--- > + Enables support for the on-chip OHCI controller on > + S3CXXXX chips. S3C24xx/S3C64xx chips > + > config USB_OHCI_HCD_AT91 > tristate "Support for Atmel on-chip OHCI USB controller" > depends on USB_OHCI_HCD && ARCH_AT91 > diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile > index a0ac663..d3e9e66 100644 > --- a/drivers/usb/host/Makefile > +++ b/drivers/usb/host/Makefile > @@ -49,6 +49,7 @@ obj-$(CONFIG_USB_OHCI_HCD_OMAP1) += ohci-omap.o > obj-$(CONFIG_USB_OHCI_HCD_OMAP3) += ohci-omap3.o > obj-$(CONFIG_USB_OHCI_HCD_SPEAR) += ohci-spear.o > obj-$(CONFIG_USB_OHCI_HCD_AT91) += ohci-at91.o > +obj-$(CONFIG_USB_OHCI_HCD_S3CXXXX) += ohci-s3c2410.o CONFIG_USB_OHCI_HCD_S3C2410 > > obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o > obj-$(CONFIG_USB_FHCI_HCD) += fhci.o > diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c > index b48c892..b69a49e 100644 > --- a/drivers/usb/host/ohci-hcd.c > +++ b/drivers/usb/host/ohci-hcd.c > @@ -1177,11 +1177,6 @@ MODULE_LICENSE ("GPL"); > #define SA1111_DRIVER ohci_hcd_sa1111_driver > #endif > > -#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX) > -#include "ohci-s3c2410.c" > -#define S3C2410_PLATFORM_DRIVER ohci_hcd_s3c2410_driver > -#endif > - > #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) > #include "ohci-pxa27x.c" > #define PLATFORM_DRIVER ohci_hcd_pxa27x_driver > @@ -1293,12 +1288,6 @@ static int __init ohci_hcd_mod_init(void) > goto error_tmio; > #endif > > -#ifdef S3C2410_PLATFORM_DRIVER > - retval = platform_driver_register(&S3C2410_PLATFORM_DRIVER); > - if (retval < 0) > - goto error_s3c2410; > -#endif > - > #ifdef EP93XX_PLATFORM_DRIVER > retval = platform_driver_register(&EP93XX_PLATFORM_DRIVER); > if (retval < 0) > @@ -1332,10 +1321,6 @@ static int __init ohci_hcd_mod_init(void) > platform_driver_unregister(&EP93XX_PLATFORM_DRIVER); > error_ep93xx: > #endif > -#ifdef S3C2410_PLATFORM_DRIVER > - platform_driver_unregister(&S3C2410_PLATFORM_DRIVER); > - error_s3c2410: > -#endif > #ifdef TMIO_OHCI_DRIVER > platform_driver_unregister(&TMIO_OHCI_DRIVER); > error_tmio: > @@ -1382,9 +1367,6 @@ static void __exit ohci_hcd_mod_exit(void) > #ifdef EP93XX_PLATFORM_DRIVER > platform_driver_unregister(&EP93XX_PLATFORM_DRIVER); > #endif > -#ifdef S3C2410_PLATFORM_DRIVER > - platform_driver_unregister(&S3C2410_PLATFORM_DRIVER); > -#endif > #ifdef TMIO_OHCI_DRIVER > platform_driver_unregister(&TMIO_OHCI_DRIVER); > #endif > diff --git a/drivers/usb/host/ohci-s3c2410.c > b/drivers/usb/host/ohci-s3c2410.c index e125770..48b5948 100644 > --- a/drivers/usb/host/ohci-s3c2410.c > +++ b/drivers/usb/host/ohci-s3c2410.c > @@ -19,19 +19,36 @@ > * This file is licenced under the GPL. > */ > > -#include <linux/platform_device.h> > #include <linux/clk.h> > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > #include <linux/platform_data/usb-ohci-s3c2410.h> > +#include <linux/usb.h> > +#include <linux/usb/hcd.h> > + > +#include "ohci.h" > + > > #define valid_port(idx) ((idx) == 1 || (idx) == 2) > > /* clock device associated with the hcd */ > > + > +#define DRIVER_DESC "OHCI S3CXXXX driver" OHCI S3C2410 driver > + > +static const char hcd_name[] = "ohci-s3cxxxx"; ohci-s3c2410 > + > static struct clk *clk; > static struct clk *usb_clk; > > /* forward definitions */ > > +static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, > + u16 wValue, u16 wIndex, char *buf, u16 wLength); > +static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char > *buf); + > static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc); > > /* conversion functions */ > @@ -93,7 +110,7 @@ ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, > char *buf) int orig; > int portno; > > - orig = ohci_hub_status_data(hcd, buf); > + orig = orig_ohci_hub_status_data(hcd, buf); > > if (info == NULL) > return orig; > @@ -164,7 +181,7 @@ static int ohci_s3c2410_hub_control( > * process the request straight away and exit */ > > if (info == NULL) { > - ret = ohci_hub_control(hcd, typeReq, wValue, > + ret = orig_ohci_hub_control(hcd, typeReq, wValue, > wIndex, buf, wLength); > goto out; > } > @@ -214,7 +231,7 @@ static int ohci_s3c2410_hub_control( > break; > } > > - ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); > + ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, > wLength); if (ret) > goto out; > > @@ -373,8 +390,6 @@ static int usb_hcd_s3c2410_probe(const struct > hc_driver *driver, > > s3c2410_start_hc(dev, hcd); > > - ohci_hcd_init(hcd_to_ohci(hcd)); > - > retval = usb_add_hcd(hcd, dev->resource[1].start, 0); > if (retval != 0) > goto err_ioremap; > @@ -391,71 +406,7 @@ static int usb_hcd_s3c2410_probe(const struct > hc_driver *driver, > > /*--------------------------------------------------------------------- > ----*/ > > -static int > -ohci_s3c2410_start(struct usb_hcd *hcd) > -{ > - struct ohci_hcd *ohci = hcd_to_ohci(hcd); > - int ret; > - > - ret = ohci_init(ohci); > - if (ret < 0) > - return ret; > - > - ret = ohci_run(ohci); > - if (ret < 0) { > - dev_err(hcd->self.controller, "can't start %s\n", > - hcd->self.bus_name); > - ohci_stop(hcd); > - return ret; > - } > - > - return 0; > -} > - > - > -static const struct hc_driver ohci_s3c2410_hc_driver = { > - .description = hcd_name, > - .product_desc = "S3C24XX OHCI", > - .hcd_priv_size = sizeof(struct ohci_hcd), > - > - /* > - * generic hardware linkage > - */ > - .irq = ohci_irq, > - .flags = HCD_USB11 | HCD_MEMORY, > - > - /* > - * basic lifecycle operations > - */ > - .start = ohci_s3c2410_start, > - .stop = ohci_stop, > - .shutdown = ohci_shutdown, > - > - /* > - * managing i/o requests and associated device resources > - */ > - .urb_enqueue = ohci_urb_enqueue, > - .urb_dequeue = ohci_urb_dequeue, > - .endpoint_disable = ohci_endpoint_disable, > - > - /* > - * scheduling support > - */ > - .get_frame_number = ohci_get_frame, > - > - /* > - * root hub support > - */ > - .hub_status_data = ohci_s3c2410_hub_status_data, > - .hub_control = ohci_s3c2410_hub_control, > -#ifdef CONFIG_PM > - .bus_suspend = ohci_bus_suspend, > - .bus_resume = ohci_bus_resume, > -#endif > - .start_port_reset = ohci_start_port_reset, > -}; > - > -/* device driver */ > +static struct hc_driver __read_mostly ohci_s3c2410_hc_driver; > > static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev) > { > @@ -532,4 +483,39 @@ static struct platform_driver > ohci_hcd_s3c2410_driver = { }, > }; > > +static int __init ohci_s3cxxxx_init(void) ohci_s3c2410_init > +{ > + if (usb_disabled()) > + return -ENODEV; > + > + pr_info("%s: " DRIVER_DESC "\n", hcd_name); > + ohci_init_driver(&ohci_s3c2410_hc_driver, NULL); > + > + /* > + * The Samsung HW has some unusual quirks, which require > + * Sumsung-specific workarounds. We override certain hc_driver > + * functions here to achieve that. We explicitly do not enhance > + * ohci_driver_overrides to allow this more easily, since this > + * is an unusual case, and we don't want to encourage others to > + * override these functions by making it too easy. > + */ > + > + orig_ohci_hub_control = ohci_s3c2410_hc_driver.hub_control; > + orig_ohci_hub_status_data = ohci_s3c2410_hc_driver.hub_status_data; > + > + ohci_s3c2410_hc_driver.hub_status_data = ohci_s3c2410_hub_status_data; > + ohci_s3c2410_hc_driver.hub_control = ohci_s3c2410_hub_control; + > + return platform_driver_register(&ohci_hcd_s3c2410_driver); > +} > +module_init(ohci_s3cxxxx_init); > + > +static void __exit ohci_s3cxxxx_cleanup(void) ohci_s3c2410_cleanup > +{ > + platform_driver_unregister(&ohci_hcd_s3c2410_driver); > +} > +module_exit(ohci_s3cxxxx_cleanup); > + > +MODULE_DESCRIPTION(DRIVER_DESC); > +MODULE_LICENSE("GPL"); > MODULE_ALIAS("platform:s3c2410-ohci"); Best regards, Tomasz
On 10 August 2013 16:23, Tomasz Figa <tomasz.figa@gmail.com> wrote: > Hi Manjunath, > > On Saturday 10 of August 2013 13:07:36 Manjunath Goudar wrote: > > Separate the Samsung OHCI S3CXXXX host controller driver from ohci-hcd > > host code so that it can be built as a separate driver module. > > This work is part of enabling multi-platform kernels on ARM; > > it would be nice to have in 3.12. > > > > Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> > > Signed-off-by: Deepak Saxena <dsaxena@linaro.org> > > Acked-by: Alan Stern <stern@rowland.harvard.edu> > > Cc: Arnd Bergmann <arnd@arndb.de> > > Cc: Greg KH <greg@kroah.com> > > Cc: linux-usb@vger.kernel.org > > > > V2: > > -Set non-standard fields in ohci_s3c2410_hc_driver manually, rather > > than relying on an expanded struct ohci_driver_overrides. > > -Save orig_ohci_hub_control and orig_ohci_hub_status_data rather than > > relying on ohci_hub_control and hub_status_data being exported. > > > > V3: > > -Kconfig wrong parentheses discription fixed. > > -ohci_setup() has been removed because it is called in .reset member > > of the ohci_hc_driver structure. > > > > V4: > > - Removed extra space before the '='. > > - Moved /* forward definitions */ line before the declarations of > > functions. --- > > drivers/usb/host/Kconfig | 8 +++ > > drivers/usb/host/Makefile | 1 + > > drivers/usb/host/ohci-hcd.c | 18 ------ > > drivers/usb/host/ohci-s3c2410.c | 128 > > +++++++++++++++++---------------------- 4 files changed, 66 > > insertions(+), 89 deletions(-) > > > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > > index 693560a..795d14d 100644 > > --- a/drivers/usb/host/Kconfig > > +++ b/drivers/usb/host/Kconfig > > @@ -390,6 +390,14 @@ config USB_OHCI_HCD_SPEAR > > Enables support for the on-chip OHCI controller on > > ST SPEAr chips. > > > > +config USB_OHCI_HCD_S3CXXXX > > + tristate "Support for S3CXXXX on-chip OHCI USB controller" > > As far as I remember, you were supposed to keep the original name of this > driver, as I suggested in previous iteration of this patch and you agreed. > S3CXXXX is totally confusing when it's about Samsung SoC naming. > > So here the config entry would be USB_OHCI_HCD_S3C2410 and I would call it > "OHCI support for Samsung S3C24xx/S3C64xx SoC series". > > > + depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX) > > + default y > > + ---help--- > > + Enables support for the on-chip OHCI controller on > > + S3CXXXX chips. > > S3C24xx/S3C64xx chips > > > + > > config USB_OHCI_HCD_AT91 > > tristate "Support for Atmel on-chip OHCI USB controller" > > depends on USB_OHCI_HCD && ARCH_AT91 > > diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile > > index a0ac663..d3e9e66 100644 > > --- a/drivers/usb/host/Makefile > > +++ b/drivers/usb/host/Makefile > > @@ -49,6 +49,7 @@ obj-$(CONFIG_USB_OHCI_HCD_OMAP1) += ohci-omap.o > > obj-$(CONFIG_USB_OHCI_HCD_OMAP3) += ohci-omap3.o > > obj-$(CONFIG_USB_OHCI_HCD_SPEAR) += ohci-spear.o > > obj-$(CONFIG_USB_OHCI_HCD_AT91) += ohci-at91.o > > +obj-$(CONFIG_USB_OHCI_HCD_S3CXXXX) += ohci-s3c2410.o > > CONFIG_USB_OHCI_HCD_S3C2410 > > > > > obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o > > obj-$(CONFIG_USB_FHCI_HCD) += fhci.o > > diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c > > index b48c892..b69a49e 100644 > > --- a/drivers/usb/host/ohci-hcd.c > > +++ b/drivers/usb/host/ohci-hcd.c > > @@ -1177,11 +1177,6 @@ MODULE_LICENSE ("GPL"); > > #define SA1111_DRIVER ohci_hcd_sa1111_driver > > #endif > > > > -#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX) > > -#include "ohci-s3c2410.c" > > -#define S3C2410_PLATFORM_DRIVER ohci_hcd_s3c2410_driver > > -#endif > > - > > #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) > > #include "ohci-pxa27x.c" > > #define PLATFORM_DRIVER ohci_hcd_pxa27x_driver > > @@ -1293,12 +1288,6 @@ static int __init ohci_hcd_mod_init(void) > > goto error_tmio; > > #endif > > > > -#ifdef S3C2410_PLATFORM_DRIVER > > - retval = platform_driver_register(&S3C2410_PLATFORM_DRIVER); > > - if (retval < 0) > > - goto error_s3c2410; > > -#endif > > - > > #ifdef EP93XX_PLATFORM_DRIVER > > retval = platform_driver_register(&EP93XX_PLATFORM_DRIVER); > > if (retval < 0) > > @@ -1332,10 +1321,6 @@ static int __init ohci_hcd_mod_init(void) > > platform_driver_unregister(&EP93XX_PLATFORM_DRIVER); > > error_ep93xx: > > #endif > > -#ifdef S3C2410_PLATFORM_DRIVER > > - platform_driver_unregister(&S3C2410_PLATFORM_DRIVER); > > - error_s3c2410: > > -#endif > > #ifdef TMIO_OHCI_DRIVER > > platform_driver_unregister(&TMIO_OHCI_DRIVER); > > error_tmio: > > @@ -1382,9 +1367,6 @@ static void __exit ohci_hcd_mod_exit(void) > > #ifdef EP93XX_PLATFORM_DRIVER > > platform_driver_unregister(&EP93XX_PLATFORM_DRIVER); > > #endif > > -#ifdef S3C2410_PLATFORM_DRIVER > > - platform_driver_unregister(&S3C2410_PLATFORM_DRIVER); > > -#endif > > #ifdef TMIO_OHCI_DRIVER > > platform_driver_unregister(&TMIO_OHCI_DRIVER); > > #endif > > diff --git a/drivers/usb/host/ohci-s3c2410.c > > b/drivers/usb/host/ohci-s3c2410.c index e125770..48b5948 100644 > > --- a/drivers/usb/host/ohci-s3c2410.c > > +++ b/drivers/usb/host/ohci-s3c2410.c > > @@ -19,19 +19,36 @@ > > * This file is licenced under the GPL. > > */ > > > > -#include <linux/platform_device.h> > > #include <linux/clk.h> > > +#include <linux/io.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/platform_device.h> > > #include <linux/platform_data/usb-ohci-s3c2410.h> > > +#include <linux/usb.h> > > +#include <linux/usb/hcd.h> > > + > > +#include "ohci.h" > > + > > > > #define valid_port(idx) ((idx) == 1 || (idx) == 2) > > > > /* clock device associated with the hcd */ > > > > + > > +#define DRIVER_DESC "OHCI S3CXXXX driver" > > OHCI S3C2410 driver > > > + > > +static const char hcd_name[] = "ohci-s3cxxxx"; > > ohci-s3c2410 > > > + > > static struct clk *clk; > > static struct clk *usb_clk; > > > > /* forward definitions */ > > > > +static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, > > + u16 wValue, u16 wIndex, char *buf, u16 wLength); > > +static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char > > *buf); + > > static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc); > > > > /* conversion functions */ > > @@ -93,7 +110,7 @@ ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, > > char *buf) int orig; > > int portno; > > > > - orig = ohci_hub_status_data(hcd, buf); > > + orig = orig_ohci_hub_status_data(hcd, buf); > > > > if (info == NULL) > > return orig; > > @@ -164,7 +181,7 @@ static int ohci_s3c2410_hub_control( > > * process the request straight away and exit */ > > > > if (info == NULL) { > > - ret = ohci_hub_control(hcd, typeReq, wValue, > > + ret = orig_ohci_hub_control(hcd, typeReq, wValue, > > wIndex, buf, wLength); > > goto out; > > } > > @@ -214,7 +231,7 @@ static int ohci_s3c2410_hub_control( > > break; > > } > > > > - ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, > wLength); > > + ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, > > wLength); if (ret) > > goto out; > > > > @@ -373,8 +390,6 @@ static int usb_hcd_s3c2410_probe(const struct > > hc_driver *driver, > > > > s3c2410_start_hc(dev, hcd); > > > > - ohci_hcd_init(hcd_to_ohci(hcd)); > > - > > retval = usb_add_hcd(hcd, dev->resource[1].start, 0); > > if (retval != 0) > > goto err_ioremap; > > @@ -391,71 +406,7 @@ static int usb_hcd_s3c2410_probe(const struct > > hc_driver *driver, > > > > /*--------------------------------------------------------------------- > > ----*/ > > > > -static int > > -ohci_s3c2410_start(struct usb_hcd *hcd) > > -{ > > - struct ohci_hcd *ohci = hcd_to_ohci(hcd); > > - int ret; > > - > > - ret = ohci_init(ohci); > > - if (ret < 0) > > - return ret; > > - > > - ret = ohci_run(ohci); > > - if (ret < 0) { > > - dev_err(hcd->self.controller, "can't start %s\n", > > - hcd->self.bus_name); > > - ohci_stop(hcd); > > - return ret; > > - } > > - > > - return 0; > > -} > > - > > - > > -static const struct hc_driver ohci_s3c2410_hc_driver = { > > - .description = hcd_name, > > - .product_desc = "S3C24XX OHCI", > > - .hcd_priv_size = sizeof(struct ohci_hcd), > > - > > - /* > > - * generic hardware linkage > > - */ > > - .irq = ohci_irq, > > - .flags = HCD_USB11 | HCD_MEMORY, > > - > > - /* > > - * basic lifecycle operations > > - */ > > - .start = ohci_s3c2410_start, > > - .stop = ohci_stop, > > - .shutdown = ohci_shutdown, > > - > > - /* > > - * managing i/o requests and associated device resources > > - */ > > - .urb_enqueue = ohci_urb_enqueue, > > - .urb_dequeue = ohci_urb_dequeue, > > - .endpoint_disable = ohci_endpoint_disable, > > - > > - /* > > - * scheduling support > > - */ > > - .get_frame_number = ohci_get_frame, > > - > > - /* > > - * root hub support > > - */ > > - .hub_status_data = ohci_s3c2410_hub_status_data, > > - .hub_control = ohci_s3c2410_hub_control, > > -#ifdef CONFIG_PM > > - .bus_suspend = ohci_bus_suspend, > > - .bus_resume = ohci_bus_resume, > > -#endif > > - .start_port_reset = ohci_start_port_reset, > > -}; > > - > > -/* device driver */ > > +static struct hc_driver __read_mostly ohci_s3c2410_hc_driver; > > > > static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev) > > { > > @@ -532,4 +483,39 @@ static struct platform_driver > > ohci_hcd_s3c2410_driver = { }, > > }; > > > > +static int __init ohci_s3cxxxx_init(void) > > ohci_s3c2410_init > > > +{ > > + if (usb_disabled()) > > + return -ENODEV; > > + > > + pr_info("%s: " DRIVER_DESC "\n", hcd_name); > > + ohci_init_driver(&ohci_s3c2410_hc_driver, NULL); > > + > > + /* > > + * The Samsung HW has some unusual quirks, which require > > + * Sumsung-specific workarounds. We override certain hc_driver > > + * functions here to achieve that. We explicitly do not enhance > > + * ohci_driver_overrides to allow this more easily, since this > > + * is an unusual case, and we don't want to encourage others to > > + * override these functions by making it too easy. > > + */ > > + > > + orig_ohci_hub_control = ohci_s3c2410_hc_driver.hub_control; > > + orig_ohci_hub_status_data = > ohci_s3c2410_hc_driver.hub_status_data; > > + > > + ohci_s3c2410_hc_driver.hub_status_data = > ohci_s3c2410_hub_status_data; > > + ohci_s3c2410_hc_driver.hub_control = > ohci_s3c2410_hub_control; + > > + return platform_driver_register(&ohci_hcd_s3c2410_driver); > > +} > > +module_init(ohci_s3cxxxx_init); > > + > > +static void __exit ohci_s3cxxxx_cleanup(void) > > ohci_s3c2410_cleanup > > > +{ > > + platform_driver_unregister(&ohci_hcd_s3c2410_driver); > > +} > > +module_exit(ohci_s3cxxxx_cleanup); > > + > > +MODULE_DESCRIPTION(DRIVER_DESC); > > +MODULE_LICENSE("GPL"); > > MODULE_ALIAS("platform:s3c2410-ohci"); > > Best regards, > Tomasz > > Ok, I will do all the modification in next version. Thanks Manjunath Goudar
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 693560a..795d14d 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -390,6 +390,14 @@ config USB_OHCI_HCD_SPEAR Enables support for the on-chip OHCI controller on ST SPEAr chips. +config USB_OHCI_HCD_S3CXXXX + tristate "Support for S3CXXXX on-chip OHCI USB controller" + depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX) + default y + ---help--- + Enables support for the on-chip OHCI controller on + S3CXXXX chips. + config USB_OHCI_HCD_AT91 tristate "Support for Atmel on-chip OHCI USB controller" depends on USB_OHCI_HCD && ARCH_AT91 diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index a0ac663..d3e9e66 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_USB_OHCI_HCD_OMAP1) += ohci-omap.o obj-$(CONFIG_USB_OHCI_HCD_OMAP3) += ohci-omap3.o obj-$(CONFIG_USB_OHCI_HCD_SPEAR) += ohci-spear.o obj-$(CONFIG_USB_OHCI_HCD_AT91) += ohci-at91.o +obj-$(CONFIG_USB_OHCI_HCD_S3CXXXX) += ohci-s3c2410.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o obj-$(CONFIG_USB_FHCI_HCD) += fhci.o diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index b48c892..b69a49e 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1177,11 +1177,6 @@ MODULE_LICENSE ("GPL"); #define SA1111_DRIVER ohci_hcd_sa1111_driver #endif -#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX) -#include "ohci-s3c2410.c" -#define S3C2410_PLATFORM_DRIVER ohci_hcd_s3c2410_driver -#endif - #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #include "ohci-pxa27x.c" #define PLATFORM_DRIVER ohci_hcd_pxa27x_driver @@ -1293,12 +1288,6 @@ static int __init ohci_hcd_mod_init(void) goto error_tmio; #endif -#ifdef S3C2410_PLATFORM_DRIVER - retval = platform_driver_register(&S3C2410_PLATFORM_DRIVER); - if (retval < 0) - goto error_s3c2410; -#endif - #ifdef EP93XX_PLATFORM_DRIVER retval = platform_driver_register(&EP93XX_PLATFORM_DRIVER); if (retval < 0) @@ -1332,10 +1321,6 @@ static int __init ohci_hcd_mod_init(void) platform_driver_unregister(&EP93XX_PLATFORM_DRIVER); error_ep93xx: #endif -#ifdef S3C2410_PLATFORM_DRIVER - platform_driver_unregister(&S3C2410_PLATFORM_DRIVER); - error_s3c2410: -#endif #ifdef TMIO_OHCI_DRIVER platform_driver_unregister(&TMIO_OHCI_DRIVER); error_tmio: @@ -1382,9 +1367,6 @@ static void __exit ohci_hcd_mod_exit(void) #ifdef EP93XX_PLATFORM_DRIVER platform_driver_unregister(&EP93XX_PLATFORM_DRIVER); #endif -#ifdef S3C2410_PLATFORM_DRIVER - platform_driver_unregister(&S3C2410_PLATFORM_DRIVER); -#endif #ifdef TMIO_OHCI_DRIVER platform_driver_unregister(&TMIO_OHCI_DRIVER); #endif diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index e125770..48b5948 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -19,19 +19,36 @@ * This file is licenced under the GPL. */ -#include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> #include <linux/platform_data/usb-ohci-s3c2410.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "ohci.h" + #define valid_port(idx) ((idx) == 1 || (idx) == 2) /* clock device associated with the hcd */ + +#define DRIVER_DESC "OHCI S3CXXXX driver" + +static const char hcd_name[] = "ohci-s3cxxxx"; + static struct clk *clk; static struct clk *usb_clk; /* forward definitions */ +static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, + u16 wValue, u16 wIndex, char *buf, u16 wLength); +static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); + static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc); /* conversion functions */ @@ -93,7 +110,7 @@ ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, char *buf) int orig; int portno; - orig = ohci_hub_status_data(hcd, buf); + orig = orig_ohci_hub_status_data(hcd, buf); if (info == NULL) return orig; @@ -164,7 +181,7 @@ static int ohci_s3c2410_hub_control( * process the request straight away and exit */ if (info == NULL) { - ret = ohci_hub_control(hcd, typeReq, wValue, + ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); goto out; } @@ -214,7 +231,7 @@ static int ohci_s3c2410_hub_control( break; } - ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); + ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); if (ret) goto out; @@ -373,8 +390,6 @@ static int usb_hcd_s3c2410_probe(const struct hc_driver *driver, s3c2410_start_hc(dev, hcd); - ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, dev->resource[1].start, 0); if (retval != 0) goto err_ioremap; @@ -391,71 +406,7 @@ static int usb_hcd_s3c2410_probe(const struct hc_driver *driver, /*-------------------------------------------------------------------------*/ -static int -ohci_s3c2410_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - ret = ohci_init(ohci); - if (ret < 0) - return ret; - - ret = ohci_run(ohci); - if (ret < 0) { - dev_err(hcd->self.controller, "can't start %s\n", - hcd->self.bus_name); - ohci_stop(hcd); - return ret; - } - - return 0; -} - - -static const struct hc_driver ohci_s3c2410_hc_driver = { - .description = hcd_name, - .product_desc = "S3C24XX OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_s3c2410_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_s3c2410_hub_status_data, - .hub_control = ohci_s3c2410_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -/* device driver */ +static struct hc_driver __read_mostly ohci_s3c2410_hc_driver; static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev) { @@ -532,4 +483,39 @@ static struct platform_driver ohci_hcd_s3c2410_driver = { }, }; +static int __init ohci_s3cxxxx_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + ohci_init_driver(&ohci_s3c2410_hc_driver, NULL); + + /* + * The Samsung HW has some unusual quirks, which require + * Sumsung-specific workarounds. We override certain hc_driver + * functions here to achieve that. We explicitly do not enhance + * ohci_driver_overrides to allow this more easily, since this + * is an unusual case, and we don't want to encourage others to + * override these functions by making it too easy. + */ + + orig_ohci_hub_control = ohci_s3c2410_hc_driver.hub_control; + orig_ohci_hub_status_data = ohci_s3c2410_hc_driver.hub_status_data; + + ohci_s3c2410_hc_driver.hub_status_data = ohci_s3c2410_hub_status_data; + ohci_s3c2410_hc_driver.hub_control = ohci_s3c2410_hub_control; + + return platform_driver_register(&ohci_hcd_s3c2410_driver); +} +module_init(ohci_s3cxxxx_init); + +static void __exit ohci_s3cxxxx_cleanup(void) +{ + platform_driver_unregister(&ohci_hcd_s3c2410_driver); +} +module_exit(ohci_s3cxxxx_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:s3c2410-ohci");