@@ -585,6 +585,16 @@ config REGULATOR_MAX77802
Exynos5420/Exynos5800 SoCs to control various voltages.
It includes support for control of voltage and ramp speed.
+config REGULATOR_MAX77826
+ tristate "Maxim 77826 regulator"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver controls a Maxim 77826 regulator via I2C bus.
+ The regulator include 15 LDOs, BUCK and BUCK BOOST regulator.
+ It includes support for control of output voltage. This
+ regulator is found on the Samsung Galaxy S5 (klte) smartphone.
+
config REGULATOR_MC13XXX_CORE
tristate
@@ -74,6 +74,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o
obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o
obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o
+obj-$(CONFIG_REGULATOR_MAX77826) += max77826-regulator.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
new file mode 100644
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// max77826-regulator.c - regulator driver for Maxim MAX77826
+//
+// Author: Iskren Chernev <iskren.chernev@gmail.com>
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+enum max77826_registers {
+ MAX77826_REG_INT_SRC = 0x00,
+ MAX77826_REG_SYS_INT,
+ MAX77826_REG_INT1,
+ MAX77826_REG_INT2,
+ MAX77826_REG_BB_INT,
+ MAX77826_REG_INT_SRC_M,
+ MAX77826_REG_TOPSYS_INT_M,
+ MAX77826_REG_INT1_M,
+ MAX77826_REG_INT2_M,
+ MAX77826_REG_BB_INT_M,
+ MAX77826_REG_TOPSYS_STAT,
+ MAX77826_REG_STAT1,
+ MAX77826_REG_STAT2,
+ MAX77826_REG_BB_STAT,
+ /* 0x0E - 0x0F: Reserved */
+ MAX77826_REG_LDO_OPMD1 = 0x10,
+ MAX77826_REG_LDO_OPMD2,
+ MAX77826_REG_LDO_OPMD3,
+ MAX77826_REG_LDO_OPMD4,
+ MAX77826_REG_B_BB_OPMD,
+ /* 0x15 - 0x1F: Reserved */
+ MAX77826_REG_LDO1_CFG = 0x20,
+ MAX77826_REG_LDO2_CFG,
+ MAX77826_REG_LDO3_CFG,
+ MAX77826_REG_LDO4_CFG,
+ MAX77826_REG_LDO5_CFG,
+ MAX77826_REG_LDO6_CFG,
+ MAX77826_REG_LDO7_CFG,
+ MAX77826_REG_LDO8_CFG,
+ MAX77826_REG_LDO9_CFG,
+ MAX77826_REG_LDO10_CFG,
+ MAX77826_REG_LDO11_CFG,
+ MAX77826_REG_LDO12_CFG,
+ MAX77826_REG_LDO13_CFG,
+ MAX77826_REG_LDO14_CFG,
+ MAX77826_REG_LDO15_CFG,
+ /* 0x2F: Reserved */
+ MAX77826_REG_BUCK_CFG = 0x30,
+ MAX77826_REG_BUCK_VOUT,
+ MAX77826_REG_BB_CFG,
+ MAX77826_REG_BB_VOUT,
+ /* 0x34 - 0x3F: Reserved */
+ MAX77826_REG_BUCK_SS_FREQ = 0x40,
+ MAX77826_REG_UVLO_FALL,
+ /* 0x42 - 0xCE: Reserved */
+ MAX77826_REG_DEVICE_ID = 0xCF,
+};
+
+enum max77826_regulators {
+ MAX77826_LDO1 = 0,
+ MAX77826_LDO2,
+ MAX77826_LDO3,
+ MAX77826_LDO4,
+ MAX77826_LDO5,
+ MAX77826_LDO6,
+ MAX77826_LDO7,
+ MAX77826_LDO8,
+ MAX77826_LDO9,
+ MAX77826_LDO10,
+ MAX77826_LDO11,
+ MAX77826_LDO12,
+ MAX77826_LDO13,
+ MAX77826_LDO14,
+ MAX77826_LDO15,
+ MAX77826_BUCK,
+ MAX77826_BUCKBOOST,
+ MAX77826_MAX_REGULATORS,
+};
+
+#define MAX77826_MASK_LDO 0x7f
+#define MAX77826_MASK_BUCK 0xff
+#define MAX77826_MASK_BUCKBOOST 0x7f
+#define MAX77826_BUCK_RAMP_DELAY 12500
+
+/* values in mV */
+/* for LDO1-3 */
+#define MAX77826_NMOS_LDO_VOLT_MIN 600000
+#define MAX77826_NMOS_LDO_VOLT_MAX 2187500
+#define MAX77826_NMOS_LDO_VOLT_STEP 12500
+
+/* for LDO4-15 */
+#define MAX77826_PMOS_LDO_VOLT_MIN 800000
+#define MAX77826_PMOS_LDO_VOLT_MAX 3975000
+#define MAX77826_PMOS_LDO_VOLT_STEP 25000
+
+/* for BUCK */
+#define MAX77826_BUCK_VOLT_MIN 500000
+#define MAX77826_BUCK_VOLT_MAX 1800000
+#define MAX77826_BUCK_VOLT_STEP 6250
+
+/* for BUCKBOOST */
+#define MAX77826_BUCKBOOST_VOLT_MIN 2600000
+#define MAX77826_BUCKBOOST_VOLT_MAX 4187500
+#define MAX77826_BUCKBOOST_VOLT_STEP 12500
+#define MAX77826_VOLT_RANGE(_type) \
+ ((MAX77826_ ## _type ## _VOLT_MAX - \
+ MAX77826_ ## _type ## _VOLT_MIN) / \
+ MAX77826_ ## _type ## _VOLT_STEP + 1)
+
+#define MAX77826_LDO(_id, _type) \
+ [MAX77826_LDO ## _id] = { \
+ .id = MAX77826_LDO ## _id, \
+ .name = "LDO"#_id, \
+ .of_match = of_match_ptr("LDO"#_id), \
+ .regulators_node = "regulators", \
+ .ops = &max77826_most_ops, \
+ .min_uV = MAX77826_ ## _type ## _LDO_VOLT_MIN, \
+ .uV_step = MAX77826_ ## _type ## _LDO_VOLT_STEP, \
+ .n_voltages = MAX77826_VOLT_RANGE(_type ## _LDO), \
+ .enable_reg = MAX77826_REG_LDO_OPMD1 + (_id - 1) / 4, \
+ .enable_mask = BIT(((_id - 1) % 4) * 2 + 1), \
+ .vsel_reg = MAX77826_REG_LDO1_CFG + (_id - 1), \
+ .vsel_mask = MAX77826_MASK_LDO, \
+ .owner = THIS_MODULE, \
+ }
+
+#define MAX77826_BUCK(_idx, _id, _ops) \
+ [MAX77826_ ## _id] = { \
+ .id = MAX77826_ ## _id, \
+ .name = #_id, \
+ .of_match = of_match_ptr(#_id), \
+ .regulators_node = "regulators", \
+ .ops = &_ops, \
+ .min_uV = MAX77826_ ## _id ## _VOLT_MIN, \
+ .uV_step = MAX77826_ ## _id ## _VOLT_STEP, \
+ .n_voltages = MAX77826_VOLT_RANGE(_id), \
+ .enable_reg = MAX77826_REG_B_BB_OPMD, \
+ .enable_mask = BIT(_idx * 2 + 1), \
+ .vsel_reg = MAX77826_REG_BUCK_VOUT + _idx * 2, \
+ .vsel_mask = MAX77826_MASK_ ## _id, \
+ .owner = THIS_MODULE, \
+ }
+
+
+
+struct max77826_regulator_info {
+ struct regmap *regmap;
+ struct regulator_desc *rdesc;
+};
+
+static const struct regmap_config max77826_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77826_REG_DEVICE_ID,
+};
+
+static int max77826_set_voltage_time_sel(struct regulator_dev *,
+ unsigned int old_selector,
+ unsigned int new_selector);
+
+static const struct regulator_ops max77826_most_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_ops max77826_buck_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = max77826_set_voltage_time_sel,
+};
+
+static struct regulator_desc max77826_regulators_desc[] = {
+ MAX77826_LDO(1, NMOS),
+ MAX77826_LDO(2, NMOS),
+ MAX77826_LDO(3, NMOS),
+ MAX77826_LDO(4, PMOS),
+ MAX77826_LDO(5, PMOS),
+ MAX77826_LDO(6, PMOS),
+ MAX77826_LDO(7, PMOS),
+ MAX77826_LDO(8, PMOS),
+ MAX77826_LDO(9, PMOS),
+ MAX77826_LDO(10, PMOS),
+ MAX77826_LDO(11, PMOS),
+ MAX77826_LDO(12, PMOS),
+ MAX77826_LDO(13, PMOS),
+ MAX77826_LDO(14, PMOS),
+ MAX77826_LDO(15, PMOS),
+ MAX77826_BUCK(0, BUCK, max77826_buck_ops),
+ MAX77826_BUCK(1, BUCKBOOST, max77826_most_ops),
+};
+
+static int max77826_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector,
+ unsigned int new_selector)
+{
+ if (new_selector > old_selector) {
+ return DIV_ROUND_UP(MAX77826_BUCK_VOLT_STEP *
+ (new_selector - old_selector),
+ MAX77826_BUCK_RAMP_DELAY);
+ }
+
+ return 0;
+}
+
+static int max77826_read_device_id(struct regmap *regmap, struct device *dev)
+{
+ unsigned int device_id;
+ int res;
+
+ res = regmap_read(regmap, MAX77826_REG_DEVICE_ID, &device_id);
+ if (!res)
+ dev_dbg(dev, "DEVICE_ID: 0x%x\n", device_id);
+
+ return res;
+}
+
+static int max77826_i2c_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct max77826_regulator_info *info;
+ struct regulator_config config = {};
+ struct regulator_dev *rdev;
+ struct regmap *regmap;
+ int i;
+
+ info = devm_kzalloc(dev, sizeof(struct max77826_regulator_info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->rdesc = max77826_regulators_desc;
+ regmap = devm_regmap_init_i2c(client, &max77826_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "Failed to allocate regmap!\n");
+ return PTR_ERR(regmap);
+ }
+
+ info->regmap = regmap;
+ i2c_set_clientdata(client, info);
+
+ config.dev = dev;
+ config.regmap = regmap;
+ config.driver_data = info;
+
+ for (i = 0; i < MAX77826_MAX_REGULATORS; i++) {
+ rdev = devm_regulator_register(dev,
+ &max77826_regulators_desc[i],
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "Failed to register regulator!\n");
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return max77826_read_device_id(regmap, dev);
+}
+
+static const struct of_device_id max77826_of_match[] = {
+ { .compatible = "maxim,max77826-regulator" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max77826_of_match);
+
+static const struct i2c_device_id max77826_id[] = {
+ { "max77826-regulator" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, max77826_id);
+
+static struct i2c_driver max77826_regulator_driver = {
+ .driver = {
+ .name = "max77826",
+ .of_match_table = of_match_ptr(max77826_of_match),
+ },
+ .probe_new = max77826_i2c_probe,
+ .id_table = max77826_id,
+};
+module_i2c_driver(max77826_regulator_driver);
+
+MODULE_AUTHOR("Iskren Chernev <iskren.chernev@gmail.com>");
+MODULE_DESCRIPTION("MAX77826 PMIC regulator driver");
+MODULE_LICENSE("GPL");
Adding regulator driver for the Maxim max77826 device. The max77826 PMIC contains a high-efficiency BUCK regulator, a BUCK BOOST regulator and 15 LDOs. It is designed for smartphone and tablet applications and is accessed over I2C. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> --- drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/max77826-regulator.c | 301 +++++++++++++++++++++++++ 3 files changed, 312 insertions(+) create mode 100644 drivers/regulator/max77826-regulator.c