| Message ID | 20200523131213.18653-1-jonathan@marek.ca |
|---|---|
| State | Accepted |
| Commit | fe3dfc25c11de5a4f201d05f475863684aadfdd2 |
| Headers | show |
| Series | arm64: dts: qcom: sm8250: use dt-bindings defines for clocks | expand |
On Sat 23 May 06:12 PDT 2020, Jonathan Marek wrote: > Use the dt-bindings defines for qupv3_id_1 node's clocks. > Applied Thanks, Bjorn > Signed-off-by: Jonathan Marek <jonathan@marek.ca> > --- > arch/arm64/boot/dts/qcom/sm8250.dtsi | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi > index 9c210fbac65e..04c9c215ffcd 100644 > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi > @@ -292,7 +292,8 @@ qupv3_id_1: geniqup@ac0000 { > compatible = "qcom,geni-se-qup"; > reg = <0x0 0x00ac0000 0x0 0x6000>; > clock-names = "m-ahb", "s-ahb"; > - clocks = <&gcc 133>, <&gcc 134>; > + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, > + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; > #address-cells = <2>; > #size-cells = <2>; > ranges; > @@ -302,7 +303,7 @@ uart2: serial@a90000 { > compatible = "qcom,geni-debug-uart"; > reg = <0x0 0x00a90000 0x0 0x4000>; > clock-names = "se"; > - clocks = <&gcc 113>; > + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > status = "disabled"; > }; > -- > 2.26.1 >
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 9c210fbac65e..04c9c215ffcd 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -292,7 +292,8 @@ qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; clock-names = "m-ahb", "s-ahb"; - clocks = <&gcc 133>, <&gcc 134>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -302,7 +303,7 @@ uart2: serial@a90000 { compatible = "qcom,geni-debug-uart"; reg = <0x0 0x00a90000 0x0 0x4000>; clock-names = "se"; - clocks = <&gcc 113>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; };
Use the dt-bindings defines for qupv3_id_1 node's clocks. Signed-off-by: Jonathan Marek <jonathan@marek.ca> --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)