| Message ID | 1373378740-25734-1-git-send-email-amarendra.xt@samsung.com |
|---|---|
| State | Superseded |
| Headers | show |
On 09/07/13 23:05, amar_g wrote: > This patch resolves the below mentiond compilation error of i2c driver typo.. maybe mentiond will be mentioned? > for non-FDT case > > Compilation error: > s3c24x0_i2c.c: In function 'board_i2c_init': > s3c24x0_i2c.c:544:18: error: 'CONFIG_MAX_I2C_NUM' undeclared (first use > in this function) s3c24x0_i2c.c:544:18: note: each undeclared > identifier is reported only once for each function it appears in > s3c24x0_i2c.c:545:3: warning: implicit declaration of function > 'exynos_pinmux_config' [-Wimplicit-function-declaration] > s3c24x0_i2c.c:545:25: error: 'PERIPH_ID_I2C0' undeclared (first use in > this function) s3c24x0_i2c.c:546:10: error: 'PINMUX_FLAG_NONE' > undeclared (first use in this function) make[1]: *** > [/home/albert/src/u-boot-arm/build/VCMA9/drivers/i2c/s3c24x0_i2c.o] > Error 1 make: *** > [/home/albert/src/u-boot-arm/build/VCMA9/drivers/i2c/libi2c.o] Error 2 > > Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> > Signed-off-by: Amar <amarendra.xt@samsung.com> > --- > board/samsung/smdk5250/smdk5250.c | 10 ++++++++++ > drivers/i2c/s3c24x0_i2c.c | 9 +-------- > 2 files changed, 11 insertions(+), 8 deletions(-) > > diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c > index ae1f077..f1d3d97 100644 > --- a/board/samsung/smdk5250/smdk5250.c > +++ b/board/samsung/smdk5250/smdk5250.c > @@ -332,6 +332,16 @@ static int board_uart_init(void) > return ret; > } > > +void board_i2c_init(const void *blob) > +{ > + int i; > + > + for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) { > + exynos_pinmux_config((PERIPH_ID_I2C0 + i), > + PINMUX_FLAG_NONE); > + } > +} > + > #ifdef CONFIG_BOARD_EARLY_INIT_F > int board_early_init_f(void) > { > diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c > index 3fc1c5b..382e4c2 100644 > --- a/drivers/i2c/s3c24x0_i2c.c > +++ b/drivers/i2c/s3c24x0_i2c.c > @@ -515,10 +515,10 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) > len) != 0); > } > > +#ifdef CONFIG_OF_CONTROL > void board_i2c_init(const void *blob) > { > int i; > -#ifdef CONFIG_OF_CONTROL > int node_list[CONFIG_MAX_I2C_NUM]; > int count; > > @@ -540,15 +540,8 @@ void board_i2c_init(const void *blob) > bus->bus_num = i2c_busses++; > exynos_pinmux_config(bus->id, 0); > } > -#else > - for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) { > - exynos_pinmux_config((PERIPH_ID_I2C0 + i), > - PINMUX_FLAG_NONE); > - } > -#endif > } > > -#ifdef CONFIG_OF_CONTROL > static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx) > { > if (bus_idx < i2c_busses) >
Dear Minkyu, Please find the response below. Thanks & Regards Amarendra Reddy On 10 July 2013 07:42, Minkyu Kang <mk7.kang@samsung.com> wrote: > On 09/07/13 23:05, amar_g wrote: > > This patch resolves the below mentiond compilation error of i2c driver > > typo.. maybe mentiond will be mentioned? > OK will change mentiond to mentioned. > > for non-FDT case > > > > Compilation error: > > s3c24x0_i2c.c: In function 'board_i2c_init': > > s3c24x0_i2c.c:544:18: error: 'CONFIG_MAX_I2C_NUM' undeclared (first use > > in this function) s3c24x0_i2c.c:544:18: note: each undeclared > > identifier is reported only once for each function it appears in > > s3c24x0_i2c.c:545:3: warning: implicit declaration of function > > 'exynos_pinmux_config' [-Wimplicit-function-declaration] > > s3c24x0_i2c.c:545:25: error: 'PERIPH_ID_I2C0' undeclared (first use in > > this function) s3c24x0_i2c.c:546:10: error: 'PINMUX_FLAG_NONE' > > undeclared (first use in this function) make[1]: *** > > [/home/albert/src/u-boot-arm/build/VCMA9/drivers/i2c/s3c24x0_i2c.o] > > Error 1 make: *** > > [/home/albert/src/u-boot-arm/build/VCMA9/drivers/i2c/libi2c.o] Error 2 > > > > Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> > > Signed-off-by: Amar <amarendra.xt@samsung.com> > > --- > > board/samsung/smdk5250/smdk5250.c | 10 ++++++++++ > > drivers/i2c/s3c24x0_i2c.c | 9 +-------- > > 2 files changed, 11 insertions(+), 8 deletions(-) > > > > diff --git a/board/samsung/smdk5250/smdk5250.c > b/board/samsung/smdk5250/smdk5250.c > > index ae1f077..f1d3d97 100644 > > --- a/board/samsung/smdk5250/smdk5250.c > > +++ b/board/samsung/smdk5250/smdk5250.c > > @@ -332,6 +332,16 @@ static int board_uart_init(void) > > return ret; > > } > > > > +void board_i2c_init(const void *blob) > > +{ > > + int i; > > + > > + for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) { > > + exynos_pinmux_config((PERIPH_ID_I2C0 + i), > > + PINMUX_FLAG_NONE); > > + } > > +} > > + > > #ifdef CONFIG_BOARD_EARLY_INIT_F > > int board_early_init_f(void) > > { > > diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c > > index 3fc1c5b..382e4c2 100644 > > --- a/drivers/i2c/s3c24x0_i2c.c > > +++ b/drivers/i2c/s3c24x0_i2c.c > > @@ -515,10 +515,10 @@ int i2c_write(uchar chip, uint addr, int alen, > uchar *buffer, int len) > > len) != 0); > > } > > > > +#ifdef CONFIG_OF_CONTROL > > void board_i2c_init(const void *blob) > > { > > int i; > > -#ifdef CONFIG_OF_CONTROL > > int node_list[CONFIG_MAX_I2C_NUM]; > > int count; > > > > @@ -540,15 +540,8 @@ void board_i2c_init(const void *blob) > > bus->bus_num = i2c_busses++; > > exynos_pinmux_config(bus->id, 0); > > } > > -#else > > - for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) { > > - exynos_pinmux_config((PERIPH_ID_I2C0 + i), > > - PINMUX_FLAG_NONE); > > - } > > -#endif > > } > > > > -#ifdef CONFIG_OF_CONTROL > > static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx) > > { > > if (bus_idx < i2c_busses) > > > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot >
Hi Albert, Please find my response below. Thanks & Regards Amarendra Reddy On 9 July 2013 20:15, Albert ARIBAUD <albert.u.boot@aribaud.net> wrote: > Hi amar_g, > > On Tue, 09 Jul 2013 19:35:40 +0530, amar_g <amarendra.xt@samsung.com> > wrote: > > > This patch resolves the below mentiond compilation error of i2c driver > > for non-FDT case > > > > Compilation error: > ---8<--- > > s3c24x0_i2c.c: In function 'board_i2c_init': > > s3c24x0_i2c.c:544:18: error: 'CONFIG_MAX_I2C_NUM' undeclared (first use > > in this function) s3c24x0_i2c.c:544:18: note: each undeclared > > identifier is reported only once for each function it appears in > > s3c24x0_i2c.c:545:3: warning: implicit declaration of function > > 'exynos_pinmux_config' [-Wimplicit-function-declaration] > > s3c24x0_i2c.c:545:25: error: 'PERIPH_ID_I2C0' undeclared (first use in > > this function) s3c24x0_i2c.c:546:10: error: 'PINMUX_FLAG_NONE' > > undeclared (first use in this function) > ---8<--- > > Please limit info to the error message between 8< above, or better yet, > just mention a summary of the error. > > Also: since this is the V1 of a V0, it requires patch history after the > commit message delimiter ('---' line below). > > Ok, shall add history after the delimiter ('---' line below). And shall limit the error message for less than eight lines. > > Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> > > Signed-off-by: Amar <amarendra.xt@samsung.com> > > --- > > board/samsung/smdk5250/smdk5250.c | 10 ++++++++++ > > drivers/i2c/s3c24x0_i2c.c | 9 +-------- > > 2 files changed, 11 insertions(+), 8 deletions(-) > > > > diff --git a/board/samsung/smdk5250/smdk5250.c > b/board/samsung/smdk5250/smdk5250.c > > index ae1f077..f1d3d97 100644 > > --- a/board/samsung/smdk5250/smdk5250.c > > +++ b/board/samsung/smdk5250/smdk5250.c > > @@ -332,6 +332,16 @@ static int board_uart_init(void) > > return ret; > > } > > > > +void board_i2c_init(const void *blob) > > +{ > > + int i; > > + > > + for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) { > > + exynos_pinmux_config((PERIPH_ID_I2C0 + i), > > + PINMUX_FLAG_NONE); > > + } > > +} > > + > > #ifdef CONFIG_BOARD_EARLY_INIT_F > > int board_early_init_f(void) > > { > > diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c > > index 3fc1c5b..382e4c2 100644 > > --- a/drivers/i2c/s3c24x0_i2c.c > > +++ b/drivers/i2c/s3c24x0_i2c.c > > @@ -515,10 +515,10 @@ int i2c_write(uchar chip, uint addr, int alen, > uchar *buffer, int len) > > len) != 0); > > } > > > > +#ifdef CONFIG_OF_CONTROL > > void board_i2c_init(const void *blob) > > { > > int i; > > -#ifdef CONFIG_OF_CONTROL > > int node_list[CONFIG_MAX_I2C_NUM]; > > int count; > > > > @@ -540,15 +540,8 @@ void board_i2c_init(const void *blob) > > bus->bus_num = i2c_busses++; > > exynos_pinmux_config(bus->id, 0); > > } > > -#else > > - for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) { > > - exynos_pinmux_config((PERIPH_ID_I2C0 + i), > > - PINMUX_FLAG_NONE); > > - } > > -#endif > > } > > > > -#ifdef CONFIG_OF_CONTROL > > static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx) > > { > > if (bus_idx < i2c_busses) > > Amicalement, > -- > Albert. > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot >
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index ae1f077..f1d3d97 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -332,6 +332,16 @@ static int board_uart_init(void) return ret; } +void board_i2c_init(const void *blob) +{ + int i; + + for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) { + exynos_pinmux_config((PERIPH_ID_I2C0 + i), + PINMUX_FLAG_NONE); + } +} + #ifdef CONFIG_BOARD_EARLY_INIT_F int board_early_init_f(void) { diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index 3fc1c5b..382e4c2 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -515,10 +515,10 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) len) != 0); } +#ifdef CONFIG_OF_CONTROL void board_i2c_init(const void *blob) { int i; -#ifdef CONFIG_OF_CONTROL int node_list[CONFIG_MAX_I2C_NUM]; int count; @@ -540,15 +540,8 @@ void board_i2c_init(const void *blob) bus->bus_num = i2c_busses++; exynos_pinmux_config(bus->id, 0); } -#else - for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) { - exynos_pinmux_config((PERIPH_ID_I2C0 + i), - PINMUX_FLAG_NONE); - } -#endif } -#ifdef CONFIG_OF_CONTROL static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx) { if (bus_idx < i2c_busses)