@@ -34,5 +34,8 @@ config DMA_OMAP
Enable support for the TI sDMA (System DMA or DMA4) controller. This
DMA engine is found on OMAP and DRA7xx parts.
+config TI_K3_PSIL
+ bool
+
config TI_DMA_CROSSBAR
bool
@@ -2,4 +2,5 @@
obj-$(CONFIG_TI_CPPI41) += cppi41.o
obj-$(CONFIG_TI_EDMA) += edma.o
obj-$(CONFIG_DMA_OMAP) += omap-dma.o
+obj-$(CONFIG_TI_K3_PSIL) += k3-psil.o k3-psil-am654.o k3-psil-j721e.o
obj-$(CONFIG_TI_DMA_CROSSBAR) += dma-crossbar.o
new file mode 100644
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+
+#include <linux/kernel.h>
+
+#include "k3-psil-priv.h"
+
+#define PSIL_PDMA_XY_TR(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_PDMA_XY, \
+ }, \
+ }
+
+#define PSIL_PDMA_XY_PKT(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_PDMA_XY, \
+ .pkt_mode = 1, \
+ }, \
+ }
+
+#define PSIL_ETHERNET(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_NATIVE, \
+ .pkt_mode = 1, \
+ .needs_epib = 1, \
+ .psd_size = 16, \
+ }, \
+ }
+
+#define PSIL_SA2UL(x, tx) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_NATIVE, \
+ .pkt_mode = 1, \
+ .needs_epib = 1, \
+ .psd_size = 64, \
+ .notdpkt = tx, \
+ }, \
+ }
+
+/* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
+struct psil_ep am654_src_ep_map[] = {
+ /* SA2UL */
+ PSIL_SA2UL(0x4000, 0),
+ PSIL_SA2UL(0x4001, 0),
+ PSIL_SA2UL(0x4002, 0),
+ PSIL_SA2UL(0x4003, 0),
+ /* PRU_ICSSG0 */
+ PSIL_ETHERNET(0x4100),
+ PSIL_ETHERNET(0x4101),
+ PSIL_ETHERNET(0x4102),
+ PSIL_ETHERNET(0x4103),
+ /* PRU_ICSSG1 */
+ PSIL_ETHERNET(0x4200),
+ PSIL_ETHERNET(0x4201),
+ PSIL_ETHERNET(0x4202),
+ PSIL_ETHERNET(0x4203),
+ /* PRU_ICSSG2 */
+ PSIL_ETHERNET(0x4300),
+ PSIL_ETHERNET(0x4301),
+ PSIL_ETHERNET(0x4302),
+ PSIL_ETHERNET(0x4303),
+ /* PDMA0 - McASPs */
+ PSIL_PDMA_XY_TR(0x4400),
+ PSIL_PDMA_XY_TR(0x4401),
+ PSIL_PDMA_XY_TR(0x4402),
+ /* PDMA1 - SPI0-4 */
+ PSIL_PDMA_XY_PKT(0x4500),
+ PSIL_PDMA_XY_PKT(0x4501),
+ PSIL_PDMA_XY_PKT(0x4502),
+ PSIL_PDMA_XY_PKT(0x4503),
+ PSIL_PDMA_XY_PKT(0x4504),
+ PSIL_PDMA_XY_PKT(0x4505),
+ PSIL_PDMA_XY_PKT(0x4506),
+ PSIL_PDMA_XY_PKT(0x4507),
+ PSIL_PDMA_XY_PKT(0x4508),
+ PSIL_PDMA_XY_PKT(0x4509),
+ PSIL_PDMA_XY_PKT(0x450a),
+ PSIL_PDMA_XY_PKT(0x450b),
+ PSIL_PDMA_XY_PKT(0x450c),
+ PSIL_PDMA_XY_PKT(0x450d),
+ PSIL_PDMA_XY_PKT(0x450e),
+ PSIL_PDMA_XY_PKT(0x450f),
+ PSIL_PDMA_XY_PKT(0x4510),
+ PSIL_PDMA_XY_PKT(0x4511),
+ PSIL_PDMA_XY_PKT(0x4512),
+ PSIL_PDMA_XY_PKT(0x4513),
+ /* PDMA1 - USART0-2 */
+ PSIL_PDMA_XY_PKT(0x4514),
+ PSIL_PDMA_XY_PKT(0x4515),
+ PSIL_PDMA_XY_PKT(0x4516),
+ /* CPSW0 */
+ PSIL_ETHERNET(0x7000),
+ /* MCU_PDMA0 - ADCs */
+ PSIL_PDMA_XY_TR(0x7100),
+ PSIL_PDMA_XY_TR(0x7101),
+ PSIL_PDMA_XY_TR(0x7102),
+ PSIL_PDMA_XY_TR(0x7103),
+ /* MCU_PDMA1 - MCU_SPI0-2 */
+ PSIL_PDMA_XY_PKT(0x7200),
+ PSIL_PDMA_XY_PKT(0x7201),
+ PSIL_PDMA_XY_PKT(0x7202),
+ PSIL_PDMA_XY_PKT(0x7203),
+ PSIL_PDMA_XY_PKT(0x7204),
+ PSIL_PDMA_XY_PKT(0x7205),
+ PSIL_PDMA_XY_PKT(0x7206),
+ PSIL_PDMA_XY_PKT(0x7207),
+ PSIL_PDMA_XY_PKT(0x7208),
+ PSIL_PDMA_XY_PKT(0x7209),
+ PSIL_PDMA_XY_PKT(0x720a),
+ PSIL_PDMA_XY_PKT(0x720b),
+ /* MCU_PDMA1 - MCU_USART0 */
+ PSIL_PDMA_XY_PKT(0x7212),
+};
+
+/* PSI-L destination thread IDs, used for TX (DMA_MEM_TO_DEV) */
+struct psil_ep am654_dst_ep_map[] = {
+ /* SA2UL */
+ PSIL_SA2UL(0xc000, 1),
+ PSIL_SA2UL(0xc001, 1),
+ /* PRU_ICSSG0 */
+ PSIL_ETHERNET(0xc100),
+ PSIL_ETHERNET(0xc101),
+ PSIL_ETHERNET(0xc102),
+ PSIL_ETHERNET(0xc103),
+ PSIL_ETHERNET(0xc104),
+ PSIL_ETHERNET(0xc105),
+ PSIL_ETHERNET(0xc106),
+ PSIL_ETHERNET(0xc107),
+ /* PRU_ICSSG1 */
+ PSIL_ETHERNET(0xc200),
+ PSIL_ETHERNET(0xc201),
+ PSIL_ETHERNET(0xc202),
+ PSIL_ETHERNET(0xc203),
+ PSIL_ETHERNET(0xc204),
+ PSIL_ETHERNET(0xc205),
+ PSIL_ETHERNET(0xc206),
+ PSIL_ETHERNET(0xc207),
+ /* PRU_ICSSG2 */
+ PSIL_ETHERNET(0xc300),
+ PSIL_ETHERNET(0xc301),
+ PSIL_ETHERNET(0xc302),
+ PSIL_ETHERNET(0xc303),
+ PSIL_ETHERNET(0xc304),
+ PSIL_ETHERNET(0xc305),
+ PSIL_ETHERNET(0xc306),
+ PSIL_ETHERNET(0xc307),
+ /* CPSW0 */
+ PSIL_ETHERNET(0xf000),
+ PSIL_ETHERNET(0xf001),
+ PSIL_ETHERNET(0xf002),
+ PSIL_ETHERNET(0xf003),
+ PSIL_ETHERNET(0xf004),
+ PSIL_ETHERNET(0xf005),
+ PSIL_ETHERNET(0xf006),
+ PSIL_ETHERNET(0xf007),
+};
+
+struct psil_ep_map am654_ep_map = {
+ .name = "am654",
+ .src = am654_src_ep_map,
+ .src_count = ARRAY_SIZE(am654_src_ep_map),
+ .dst = am654_dst_ep_map,
+ .dst_count = ARRAY_SIZE(am654_dst_ep_map),
+};
new file mode 100644
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+
+#include <linux/kernel.h>
+
+#include "k3-psil-priv.h"
+
+#define PSIL_PDMA_XY_TR(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_PDMA_XY, \
+ }, \
+ }
+
+#define PSIL_PDMA_XY_PKT(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_PDMA_XY, \
+ .pkt_mode = 1, \
+ }, \
+ }
+
+#define PSIL_PDMA_MCASP(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_PDMA_XY, \
+ .pdma_acc32 = 1, \
+ .pdma_burst = 1, \
+ }, \
+ }
+
+#define PSIL_ETHERNET(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_NATIVE, \
+ .pkt_mode = 1, \
+ .needs_epib = 1, \
+ .psd_size = 16, \
+ }, \
+ }
+
+#define PSIL_SA2UL(x, tx) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_NATIVE, \
+ .pkt_mode = 1, \
+ .needs_epib = 1, \
+ .psd_size = 64, \
+ .notdpkt = tx, \
+ }, \
+ }
+
+/* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
+struct psil_ep j721e_src_ep_map[] = {
+ /* SA2UL */
+ PSIL_SA2UL(0x4000, 0),
+ PSIL_SA2UL(0x4001, 0),
+ PSIL_SA2UL(0x4002, 0),
+ PSIL_SA2UL(0x4003, 0),
+ /* PRU_ICSSG0 */
+ PSIL_ETHERNET(0x4100),
+ PSIL_ETHERNET(0x4101),
+ PSIL_ETHERNET(0x4102),
+ PSIL_ETHERNET(0x4103),
+ /* PRU_ICSSG1 */
+ PSIL_ETHERNET(0x4200),
+ PSIL_ETHERNET(0x4201),
+ PSIL_ETHERNET(0x4202),
+ PSIL_ETHERNET(0x4203),
+ /* PDMA6 (PSIL_PDMA_MCASP_G0) - McASP0-2 */
+ PSIL_PDMA_MCASP(0x4400),
+ PSIL_PDMA_MCASP(0x4401),
+ PSIL_PDMA_MCASP(0x4402),
+ /* PDMA7 (PSIL_PDMA_MCASP_G1) - McASP3-11 */
+ PSIL_PDMA_MCASP(0x4500),
+ PSIL_PDMA_MCASP(0x4501),
+ PSIL_PDMA_MCASP(0x4502),
+ PSIL_PDMA_MCASP(0x4503),
+ PSIL_PDMA_MCASP(0x4504),
+ PSIL_PDMA_MCASP(0x4505),
+ PSIL_PDMA_MCASP(0x4506),
+ PSIL_PDMA_MCASP(0x4507),
+ PSIL_PDMA_MCASP(0x4508),
+ /* PDMA8 (PDMA_MISC_G0) - SPI0-1 */
+ PSIL_PDMA_XY_PKT(0x4600),
+ PSIL_PDMA_XY_PKT(0x4601),
+ PSIL_PDMA_XY_PKT(0x4602),
+ PSIL_PDMA_XY_PKT(0x4603),
+ PSIL_PDMA_XY_PKT(0x4604),
+ PSIL_PDMA_XY_PKT(0x4605),
+ PSIL_PDMA_XY_PKT(0x4606),
+ PSIL_PDMA_XY_PKT(0x4607),
+ /* PDMA9 (PDMA_MISC_G1) - SPI2-3 */
+ PSIL_PDMA_XY_PKT(0x460c),
+ PSIL_PDMA_XY_PKT(0x460d),
+ PSIL_PDMA_XY_PKT(0x460e),
+ PSIL_PDMA_XY_PKT(0x460f),
+ PSIL_PDMA_XY_PKT(0x4610),
+ PSIL_PDMA_XY_PKT(0x4611),
+ PSIL_PDMA_XY_PKT(0x4612),
+ PSIL_PDMA_XY_PKT(0x4613),
+ /* PDMA10 (PDMA_MISC_G2) - SPI4-5 */
+ PSIL_PDMA_XY_PKT(0x4618),
+ PSIL_PDMA_XY_PKT(0x4619),
+ PSIL_PDMA_XY_PKT(0x461a),
+ PSIL_PDMA_XY_PKT(0x461b),
+ PSIL_PDMA_XY_PKT(0x461c),
+ PSIL_PDMA_XY_PKT(0x461d),
+ PSIL_PDMA_XY_PKT(0x461e),
+ PSIL_PDMA_XY_PKT(0x461f),
+ /* PDMA11 (PDMA_MISC_G3) */
+ PSIL_PDMA_XY_PKT(0x4624),
+ PSIL_PDMA_XY_PKT(0x4625),
+ PSIL_PDMA_XY_PKT(0x4626),
+ PSIL_PDMA_XY_PKT(0x4627),
+ PSIL_PDMA_XY_PKT(0x4628),
+ PSIL_PDMA_XY_PKT(0x4629),
+ PSIL_PDMA_XY_PKT(0x4630),
+ PSIL_PDMA_XY_PKT(0x463a),
+ /* PDMA13 (PDMA_USART_G0) - UART0-1 */
+ PSIL_PDMA_XY_PKT(0x4700),
+ PSIL_PDMA_XY_PKT(0x4701),
+ /* PDMA14 (PDMA_USART_G1) - UART2-3 */
+ PSIL_PDMA_XY_PKT(0x4702),
+ PSIL_PDMA_XY_PKT(0x4703),
+ /* PDMA15 (PDMA_USART_G2) - UART4-9 */
+ PSIL_PDMA_XY_PKT(0x4704),
+ PSIL_PDMA_XY_PKT(0x4705),
+ PSIL_PDMA_XY_PKT(0x4706),
+ PSIL_PDMA_XY_PKT(0x4707),
+ PSIL_PDMA_XY_PKT(0x4708),
+ PSIL_PDMA_XY_PKT(0x4709),
+ /* CPSW9 */
+ PSIL_ETHERNET(0x4a00),
+ /* CPSW0 */
+ PSIL_ETHERNET(0x7000),
+ /* MCU_PDMA0 (MCU_PDMA_MISC_G0) - SPI0 */
+ PSIL_PDMA_XY_PKT(0x7100),
+ PSIL_PDMA_XY_PKT(0x7101),
+ PSIL_PDMA_XY_PKT(0x7102),
+ PSIL_PDMA_XY_PKT(0x7103),
+ /* MCU_PDMA1 (MCU_PDMA_MISC_G1) - SPI1-2 */
+ PSIL_PDMA_XY_PKT(0x7200),
+ PSIL_PDMA_XY_PKT(0x7201),
+ PSIL_PDMA_XY_PKT(0x7202),
+ PSIL_PDMA_XY_PKT(0x7203),
+ PSIL_PDMA_XY_PKT(0x7204),
+ PSIL_PDMA_XY_PKT(0x7205),
+ PSIL_PDMA_XY_PKT(0x7206),
+ PSIL_PDMA_XY_PKT(0x7207),
+ /* MCU_PDMA2 (MCU_PDMA_MISC_G2) - UART0 */
+ PSIL_PDMA_XY_PKT(0x7300),
+ /* MCU_PDMA_ADC - ADC0-1 */
+ PSIL_PDMA_XY_TR(0x7400),
+ PSIL_PDMA_XY_TR(0x7401),
+ PSIL_PDMA_XY_TR(0x7402),
+ PSIL_PDMA_XY_TR(0x7403),
+ /* SA2UL */
+ PSIL_SA2UL(0x7500, 0),
+ PSIL_SA2UL(0x7501, 0),
+};
+
+/* PSI-L destination thread IDs, used for TX (DMA_MEM_TO_DEV) */
+struct psil_ep j721e_dst_ep_map[] = {
+ /* SA2UL */
+ PSIL_SA2UL(0xc000, 1),
+ PSIL_SA2UL(0xc001, 1),
+ /* PRU_ICSSG0 */
+ PSIL_ETHERNET(0xc100),
+ PSIL_ETHERNET(0xc101),
+ PSIL_ETHERNET(0xc102),
+ PSIL_ETHERNET(0xc103),
+ PSIL_ETHERNET(0xc104),
+ PSIL_ETHERNET(0xc105),
+ PSIL_ETHERNET(0xc106),
+ PSIL_ETHERNET(0xc107),
+ /* PRU_ICSSG1 */
+ PSIL_ETHERNET(0xc200),
+ PSIL_ETHERNET(0xc201),
+ PSIL_ETHERNET(0xc202),
+ PSIL_ETHERNET(0xc203),
+ PSIL_ETHERNET(0xc204),
+ PSIL_ETHERNET(0xc205),
+ PSIL_ETHERNET(0xc206),
+ PSIL_ETHERNET(0xc207),
+ /* CPSW9 */
+ PSIL_ETHERNET(0xca00),
+ PSIL_ETHERNET(0xca01),
+ PSIL_ETHERNET(0xca02),
+ PSIL_ETHERNET(0xca03),
+ PSIL_ETHERNET(0xca04),
+ PSIL_ETHERNET(0xca05),
+ PSIL_ETHERNET(0xca06),
+ PSIL_ETHERNET(0xca07),
+ /* CPSW0 */
+ PSIL_ETHERNET(0xf000),
+ PSIL_ETHERNET(0xf001),
+ PSIL_ETHERNET(0xf002),
+ PSIL_ETHERNET(0xf003),
+ PSIL_ETHERNET(0xf004),
+ PSIL_ETHERNET(0xf005),
+ PSIL_ETHERNET(0xf006),
+ PSIL_ETHERNET(0xf007),
+ /* SA2UL */
+ PSIL_SA2UL(0xf500, 1),
+};
+
+struct psil_ep_map j721e_ep_map = {
+ .name = "j721e",
+ .src = j721e_src_ep_map,
+ .src_count = ARRAY_SIZE(j721e_src_ep_map),
+ .dst = j721e_dst_ep_map,
+ .dst_count = ARRAY_SIZE(j721e_dst_ep_map),
+};
new file mode 100644
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#ifndef K3_PSIL_PRIV_H_
+#define K3_PSIL_PRIV_H_
+
+#include <linux/dma/k3-psil.h>
+
+struct psil_ep {
+ u32 thread_id;
+ struct psil_endpoint_config ep_config;
+};
+
+/**
+ * struct psil_ep_map - PSI-L thread ID configuration maps
+ * @name: Name of the map, set it to the name of the SoC
+ * @src: Array of source PSI-L thread configurations
+ * @src_count: Number of entries in the src array
+ * @dst: Array of destination PSI-L thread configurations
+ * @dst_count: Number of entries in the dst array
+ *
+ * In case of symmetric configuration for a matching src/dst thread (for example
+ * 0x4400 and 0xc400) only the src configuration can be present. If no dst
+ * configuration found the code will look for (dst_thread_id & ~0x8000) to find
+ * the symmetric match.
+ */
+struct psil_ep_map {
+ char *name;
+ struct psil_ep *src;
+ int src_count;
+ struct psil_ep *dst;
+ int dst_count;
+};
+
+struct psil_endpoint_config *psil_get_ep_config(u32 thread_id);
+
+#endif /* K3_PSIL_PRIV_H_ */
new file mode 100644
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+
+#include "k3-psil-priv.h"
+
+extern struct psil_ep_map am654_ep_map;
+extern struct psil_ep_map j721e_ep_map;
+
+static DEFINE_MUTEX(ep_map_mutex);
+static struct psil_ep_map *soc_ep_map;
+
+struct psil_endpoint_config *psil_get_ep_config(u32 thread_id)
+{
+ int i;
+
+ mutex_lock(&ep_map_mutex);
+ if (!soc_ep_map) {
+ if (of_machine_is_compatible("ti,am654")) {
+ soc_ep_map = &am654_ep_map;
+ } else if (of_machine_is_compatible("ti,j721e")) {
+ soc_ep_map = &j721e_ep_map;
+ } else {
+ pr_err("PSIL: No compatible machine found for map\n");
+ return ERR_PTR(-ENOTSUPP);
+ }
+ pr_debug("%s: Using map for %s\n", __func__, soc_ep_map->name);
+ }
+ mutex_unlock(&ep_map_mutex);
+
+ if (thread_id & K3_PSIL_DST_THREAD_ID_OFFSET && soc_ep_map->dst) {
+ /* check in destination thread map */
+ for (i = 0; i < soc_ep_map->dst_count; i++) {
+ if (soc_ep_map->dst[i].thread_id == thread_id)
+ return &soc_ep_map->dst[i].ep_config;
+ }
+ }
+
+ thread_id &= ~K3_PSIL_DST_THREAD_ID_OFFSET;
+ if (soc_ep_map->src) {
+ for (i = 0; i < soc_ep_map->src_count; i++) {
+ if (soc_ep_map->src[i].thread_id == thread_id)
+ return &soc_ep_map->src[i].ep_config;
+ }
+ }
+
+ return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL_GPL(psil_get_ep_config);
+
+int psil_set_new_ep_config(struct device *dev, const char *name,
+ struct psil_endpoint_config *ep_config)
+{
+ struct psil_endpoint_config *dst_ep_config;
+ struct of_phandle_args dma_spec;
+ u32 thread_id;
+ int index;
+
+ if (!dev || !dev->of_node)
+ return -EINVAL;
+
+ index = of_property_match_string(dev->of_node, "dma-names", name);
+ if (index < 0)
+ return index;
+
+ if (of_parse_phandle_with_args(dev->of_node, "dmas", "#dma-cells",
+ index, &dma_spec))
+ return -ENOENT;
+
+ thread_id = dma_spec.args[0];
+
+ dst_ep_config = psil_get_ep_config(thread_id);
+ if (IS_ERR(dst_ep_config)) {
+ pr_err("PSIL: thread ID 0x%04x not defined in map\n",
+ thread_id);
+ of_node_put(dma_spec.np);
+ return PTR_ERR(dst_ep_config);
+ }
+
+ memcpy(dst_ep_config, ep_config, sizeof(*dst_ep_config));
+
+ of_node_put(dma_spec.np);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(psil_set_new_ep_config);
new file mode 100644
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#ifndef K3_PSIL_H_
+#define K3_PSIL_H_
+
+#include <linux/types.h>
+
+#define K3_PSIL_DST_THREAD_ID_OFFSET 0x8000
+
+struct device;
+
+/**
+ * enum udma_tp_level - Channel Throughput Levels
+ * @UDMA_TP_NORMAL: Normal channel
+ * @UDMA_TP_HIGH: High Throughput channel
+ * @UDMA_TP_ULTRAHIGH: Ultra High Throughput channel
+ */
+enum udma_tp_level {
+ UDMA_TP_NORMAL = 0,
+ UDMA_TP_HIGH,
+ UDMA_TP_ULTRAHIGH,
+ UDMA_TP_LAST,
+};
+
+/**
+ * enum psil_endpoint_type - PSI-L Endpoint type
+ * @PSIL_EP_NATIVE: Normal channel
+ * @PSIL_EP_PDMA_XY: XY mode PDMA
+ * @PSIL_EP_PDMA_MCAN: MCAN mode PDMA
+ * @PSIL_EP_PDMA_AASRC: AASRC mode PDMA
+ */
+enum psil_endpoint_type {
+ PSIL_EP_NATIVE = 0,
+ PSIL_EP_PDMA_XY,
+ PSIL_EP_PDMA_MCAN,
+ PSIL_EP_PDMA_AASRC,
+};
+
+/**
+ * struct psil_endpoint_config - PSI-L Endpoint configuration
+ * @ep_type: PSI-L endpoint type
+ * @pkt_mode: If set, the channel must be in Packet mode, otherwise in
+ * TR mode
+ * @notdpkt: TDCM must be suppressed on the TX channel
+ * @needs_epib: Endpoint needs EPIB
+ * @psd_size: If set, PSdata is used by the endpoint
+ * @channel_tpl: Desired throughput level for the channel
+ * @pdma_acc32: ACC32 must be enabled on the PDMA side
+ * @pdma_burst: BURST must be enabled on the PDMA side
+ */
+struct psil_endpoint_config {
+ enum psil_endpoint_type ep_type;
+
+ unsigned pkt_mode:1;
+ unsigned notdpkt:1;
+ unsigned needs_epib:1;
+ u32 psd_size;
+ enum udma_tp_level channel_tpl;
+
+ /* PDMA properties, valid for PSIL_EP_PDMA_* */
+ unsigned pdma_acc32:1;
+ unsigned pdma_burst:1;
+};
+
+int psil_set_new_ep_config(struct device *dev, const char *name,
+ struct psil_endpoint_config *ep_config);
+
+#endif /* K3_PSIL_H_ */