| Message ID | 1372738648-21028-1-git-send-email-inderpal.singh@linaro.org |
|---|---|
| State | New |
| Headers | show |
On Tue, Jul 2, 2013 at 1:17 PM, Inderpal Singh <inderpal.singh@linaro.org>wrote: > Update the Makefiles so that all boards can use the same spl generation > tool > > Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> > Acked-by: Simon Glass <sjg@chromium.org> > --- > This is needed for the Arndale board support patch just sent > after sending this one. > > Makefile | 2 +- > include/configs/exynos5250-dt.h | 2 +- > tools/Makefile | 4 ++-- > 3 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/Makefile b/Makefile > index af4c3c0..d8c5d3f 100644 > --- a/Makefile > +++ b/Makefile > @@ -821,7 +821,7 @@ clean: > $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ > $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ > $(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \ > - $(obj)tools/mk{smdk5250,}spl \ > + $(obj)tools/mk{$(BOARD),}spl \ > $(obj)tools/mxsboot \ > $(obj)tools/ncb $(obj)tools/ubsha1 \ > $(obj)tools/kernel-doc/docproc > diff --git a/include/configs/exynos5250-dt.h > b/include/configs/exynos5250-dt.h > index 1c9eca2..a782880 100644 > --- a/include/configs/exynos5250-dt.h > +++ b/include/configs/exynos5250-dt.h > @@ -29,7 +29,7 @@ > #define CONFIG_SAMSUNG /* in a SAMSUNG core */ > #define CONFIG_S5P /* S5P Family */ > #define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ > -#define CONFIG_SMDK5250 /* which is in a SMDK5250 > */ > +#define CONFIG_EXYNOS5250 > > #include <asm/arch/cpu.h> /* get chip and board defs */ > > diff --git a/tools/Makefile b/tools/Makefile > index 4630f03..5eb14c5 100644 > --- a/tools/Makefile > +++ b/tools/Makefile > @@ -68,7 +68,7 @@ BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX) > BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX) > BIN_FILES-y += mkenvimage$(SFX) > BIN_FILES-y += mkimage$(SFX) > -BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX) > +BIN_FILES-$(CONFIG_EXYNOS5250) += mk$(BOARD)spl$(SFX) > BIN_FILES-$(CONFIG_MX23) += mxsboot$(SFX) > BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX) > BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX) > @@ -100,7 +100,7 @@ NOPED_OBJ_FILES-y += image-host.o > NOPED_OBJ_FILES-y += omapimage.o > NOPED_OBJ_FILES-y += mkenvimage.o > NOPED_OBJ_FILES-y += mkimage.o > -OBJ_FILES-$(CONFIG_SMDK5250) += mkexynosspl.o > +OBJ_FILES-$(CONFIG_EXYNOS5250) += mkexynosspl.o > OBJ_FILES-$(CONFIG_MX23) += mxsboot.o > OBJ_FILES-$(CONFIG_MX28) += mxsboot.o > OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o > -- > 1.7.9.5 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot >
Adding Minkyu, On 2 July 2013 13:10, Simon Glass <sjg@chromium.org> wrote: > > On Tue, Jul 2, 2013 at 1:17 PM, Inderpal Singh <inderpal.singh@linaro.org>wrote: > >> Update the Makefiles so that all boards can use the same spl generation >> tool >> >> Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> >> > > Acked-by: Simon Glass <sjg@chromium.org> > Can it be merged ? Let me know if there is any issue. Thanks, inder > > >> --- >> This is needed for the Arndale board support patch just sent >> after sending this one. >> >> Makefile | 2 +- >> include/configs/exynos5250-dt.h | 2 +- >> tools/Makefile | 4 ++-- >> 3 files changed, 4 insertions(+), 4 deletions(-) >> >> diff --git a/Makefile b/Makefile >> index af4c3c0..d8c5d3f 100644 >> --- a/Makefile >> +++ b/Makefile >> @@ -821,7 +821,7 @@ clean: >> $(obj)tools/gdb/{astest,gdbcont,gdbsend} >> \ >> $(obj)tools/gen_eth_addr $(obj)tools/img2srec >> \ >> $(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk >> \ >> - $(obj)tools/mk{smdk5250,}spl >> \ >> + $(obj)tools/mk{$(BOARD),}spl >> \ >> $(obj)tools/mxsboot >> \ >> $(obj)tools/ncb $(obj)tools/ubsha1 >> \ >> $(obj)tools/kernel-doc/docproc >> diff --git a/include/configs/exynos5250-dt.h >> b/include/configs/exynos5250-dt.h >> index 1c9eca2..a782880 100644 >> --- a/include/configs/exynos5250-dt.h >> +++ b/include/configs/exynos5250-dt.h >> @@ -29,7 +29,7 @@ >> #define CONFIG_SAMSUNG /* in a SAMSUNG core */ >> #define CONFIG_S5P /* S5P Family */ >> #define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ >> -#define CONFIG_SMDK5250 /* which is in a SMDK5250 >> */ >> +#define CONFIG_EXYNOS5250 >> >> #include <asm/arch/cpu.h> /* get chip and board defs */ >> >> diff --git a/tools/Makefile b/tools/Makefile >> index 4630f03..5eb14c5 100644 >> --- a/tools/Makefile >> +++ b/tools/Makefile >> @@ -68,7 +68,7 @@ BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX) >> BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX) >> BIN_FILES-y += mkenvimage$(SFX) >> BIN_FILES-y += mkimage$(SFX) >> -BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX) >> +BIN_FILES-$(CONFIG_EXYNOS5250) += mk$(BOARD)spl$(SFX) >> BIN_FILES-$(CONFIG_MX23) += mxsboot$(SFX) >> BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX) >> BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX) >> @@ -100,7 +100,7 @@ NOPED_OBJ_FILES-y += image-host.o >> NOPED_OBJ_FILES-y += omapimage.o >> NOPED_OBJ_FILES-y += mkenvimage.o >> NOPED_OBJ_FILES-y += mkimage.o >> -OBJ_FILES-$(CONFIG_SMDK5250) += mkexynosspl.o >> +OBJ_FILES-$(CONFIG_EXYNOS5250) += mkexynosspl.o >> OBJ_FILES-$(CONFIG_MX23) += mxsboot.o >> OBJ_FILES-$(CONFIG_MX28) += mxsboot.o >> OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o >> -- >> 1.7.9.5 >> >> _______________________________________________ >> U-Boot mailing list >> U-Boot@lists.denx.de >> http://lists.denx.de/mailman/listinfo/u-boot >> > >
diff --git a/Makefile b/Makefile index af4c3c0..d8c5d3f 100644 --- a/Makefile +++ b/Makefile @@ -821,7 +821,7 @@ clean: $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ $(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \ - $(obj)tools/mk{smdk5250,}spl \ + $(obj)tools/mk{$(BOARD),}spl \ $(obj)tools/mxsboot \ $(obj)tools/ncb $(obj)tools/ubsha1 \ $(obj)tools/kernel-doc/docproc diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index 1c9eca2..a782880 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -29,7 +29,7 @@ #define CONFIG_SAMSUNG /* in a SAMSUNG core */ #define CONFIG_S5P /* S5P Family */ #define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ -#define CONFIG_SMDK5250 /* which is in a SMDK5250 */ +#define CONFIG_EXYNOS5250 #include <asm/arch/cpu.h> /* get chip and board defs */ diff --git a/tools/Makefile b/tools/Makefile index 4630f03..5eb14c5 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -68,7 +68,7 @@ BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX) BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX) BIN_FILES-y += mkenvimage$(SFX) BIN_FILES-y += mkimage$(SFX) -BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX) +BIN_FILES-$(CONFIG_EXYNOS5250) += mk$(BOARD)spl$(SFX) BIN_FILES-$(CONFIG_MX23) += mxsboot$(SFX) BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX) BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX) @@ -100,7 +100,7 @@ NOPED_OBJ_FILES-y += image-host.o NOPED_OBJ_FILES-y += omapimage.o NOPED_OBJ_FILES-y += mkenvimage.o NOPED_OBJ_FILES-y += mkimage.o -OBJ_FILES-$(CONFIG_SMDK5250) += mkexynosspl.o +OBJ_FILES-$(CONFIG_EXYNOS5250) += mkexynosspl.o OBJ_FILES-$(CONFIG_MX23) += mxsboot.o OBJ_FILES-$(CONFIG_MX28) += mxsboot.o OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o
Update the Makefiles so that all boards can use the same spl generation tool Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> --- This is needed for the Arndale board support patch just sent after sending this one. Makefile | 2 +- include/configs/exynos5250-dt.h | 2 +- tools/Makefile | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-)