@@ -41,19 +41,21 @@ properties:
clocks:
minItems: 1
- maxItems: 3
+ maxItems: 4
items:
- description: Board XO source
- description: Board active XO source
- description: Sleep clock source
+ - description: Second XO source
clock-names:
minItems: 1
- maxItems: 3
+ maxItems: 4
items:
- const: bi_tcxo
- const: bi_tcxo_ao
- const: sleep_clk
+ - const: cxo2
'#clock-cells':
const: 1
@@ -3046,7 +3046,10 @@ static struct clk_branch gcc_usb3_clkref_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_usb3_clkref_clk",
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "cxo2",
+ .name = "xo",
+ },
.num_parents = 1,
.ops = &clk_branch2_ops,
},
@@ -3060,7 +3063,10 @@ static struct clk_branch gcc_hdmi_clkref_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_hdmi_clkref_clk",
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "cxo2",
+ .name = "xo",
+ },
.num_parents = 1,
.ops = &clk_branch2_ops,
},
@@ -3074,7 +3080,10 @@ static struct clk_branch gcc_edp_clkref_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_edp_clkref_clk",
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "cxo2",
+ .name = "xo",
+ },
.num_parents = 1,
.ops = &clk_branch2_ops,
},
@@ -3088,7 +3097,10 @@ static struct clk_branch gcc_ufs_clkref_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_ufs_clkref_clk",
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "cxo2",
+ .name = "xo",
+ },
.num_parents = 1,
.ops = &clk_branch2_ops,
},
@@ -3102,7 +3114,10 @@ static struct clk_branch gcc_pcie_clkref_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_pcie_clkref_clk",
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "cxo2",
+ .name = "xo",
+ },
.num_parents = 1,
.ops = &clk_branch2_ops,
},
@@ -3116,7 +3131,10 @@ static struct clk_branch gcc_rx2_usb2_clkref_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_rx2_usb2_clkref_clk",
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "cxo2",
+ .name = "xo",
+ },
.num_parents = 1,
.ops = &clk_branch2_ops,
},
@@ -3130,7 +3148,10 @@ static struct clk_branch gcc_rx1_usb2_clkref_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_rx1_usb2_clkref_clk",
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "cxo2",
+ .name = "xo",
+ },
.num_parents = 1,
.ops = &clk_branch2_ops,
},
The CLKREF clocks are all fed by the clock signal on the CXO2 pad on the SoC. Update the definition of these clocks to allow this to be wired up to the appropriate clock source. Retain "xo" as the global named parent to make the change a nop in the event that DT doesn't carry the necessary clocks definition. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- .../devicetree/bindings/clock/qcom,gcc.yaml | 6 ++-- drivers/clk/qcom/gcc-msm8996.c | 35 +++++++++++++++---- 2 files changed, 32 insertions(+), 9 deletions(-) -- 2.24.0