@@ -151,13 +151,13 @@ static int dp83869_config_port_mirroring(struct phy_device *phydev)
struct dp83869_private *dp83869 = phydev->priv;
if (dp83869->port_mirroring == DP83869_PORT_MIRRORING_EN)
- phy_set_bits_mmd(phydev, DP83869_DEVADDR, DP83869_GEN_CFG3,
- DP83869_CFG3_PORT_MIRROR_EN);
+ return phy_set_bits_mmd(phydev, DP83869_DEVADDR,
+ DP83869_GEN_CFG3,
+ DP83869_CFG3_PORT_MIRROR_EN);
else
- phy_clear_bits_mmd(phydev, DP83869_DEVADDR, DP83869_GEN_CFG3,
- DP83869_CFG3_PORT_MIRROR_EN);
-
- return 0;
+ return phy_clear_bits_mmd(phydev, DP83869_DEVADDR,
+ DP83869_GEN_CFG3,
+ DP83869_CFG3_PORT_MIRROR_EN);
}
#ifdef CONFIG_OF_MDIO
@@ -204,7 +204,7 @@ static int dp83869_of_init(struct phy_device *phydev)
&dp83869->tx_fifo_depth))
dp83869->tx_fifo_depth = DP83869_PHYCR_FIFO_DEPTH_4_B_NIB;
- return 0;
+ return ret;
}
#else
static int dp83869_of_init(struct phy_device *phydev)
@@ -216,7 +216,7 @@ static int dp83869_of_init(struct phy_device *phydev)
static int dp83869_configure_rgmii(struct phy_device *phydev,
struct dp83869_private *dp83869)
{
- int ret, val;
+ int ret = 0, val;
if (phy_interface_is_rgmii(phydev)) {
val = phy_read(phydev, MII_DP83869_PHYCTRL);
@@ -233,13 +233,13 @@ static int dp83869_configure_rgmii(struct phy_device *phydev,
}
if (dp83869->io_impedance >= 0)
- phy_modify_mmd(phydev, DP83869_DEVADDR,
- DP83869_IO_MUX_CFG,
- DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL,
- dp83869->io_impedance &
- DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL);
+ ret = phy_modify_mmd(phydev, DP83869_DEVADDR,
+ DP83869_IO_MUX_CFG,
+ DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL,
+ dp83869->io_impedance &
+ DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL);
- return 0;
+ return ret;
}
static int dp83869_configure_mode(struct phy_device *phydev,
@@ -284,9 +284,11 @@ static int dp83869_configure_mode(struct phy_device *phydev,
return ret;
break;
case DP83869_RGMII_SGMII_BRIDGE:
- phy_modify_mmd(phydev, DP83869_DEVADDR, DP83869_OP_MODE,
- DP83869_SGMII_RGMII_BRIDGE,
- DP83869_SGMII_RGMII_BRIDGE);
+ ret = phy_modify_mmd(phydev, DP83869_DEVADDR, DP83869_OP_MODE,
+ DP83869_SGMII_RGMII_BRIDGE,
+ DP83869_SGMII_RGMII_BRIDGE);
+ if (ret)
+ return ret;
ret = phy_write_mmd(phydev, DP83869_DEVADDR,
DP83869_FX_CTRL, DP83869_FX_CTRL_DEFAULT);
@@ -334,7 +336,7 @@ static int dp83869_configure_mode(struct phy_device *phydev,
return -EINVAL;
};
- return 0;
+ return ret;
}
static int dp83869_config_init(struct phy_device *phydev)
@@ -358,12 +360,13 @@ static int dp83869_config_init(struct phy_device *phydev)
/* Clock output selection if muxing property is set */
if (dp83869->clk_output_sel != DP83869_CLK_O_SEL_REF_CLK)
- phy_modify_mmd(phydev, DP83869_DEVADDR, DP83869_IO_MUX_CFG,
- DP83869_IO_MUX_CFG_CLK_O_SEL_MASK,
- dp83869->clk_output_sel <<
- DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT);
+ ret = phy_modify_mmd(phydev,
+ DP83869_DEVADDR, DP83869_IO_MUX_CFG,
+ DP83869_IO_MUX_CFG_CLK_O_SEL_MASK,
+ dp83869->clk_output_sel <<
+ DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT);
- return 0;
+ return ret;
}
static int dp83869_probe(struct phy_device *phydev)
Fix the return paths for all I/O operations to ensure that the I/O completed successfully. Then pass the return to the caller for further processing Reported-by: Andrew Lunn <andrew@lunn.ch> Fixes: 01db923e8377 ("net: phy: dp83869: Add TI dp83869 phy") Signed-off-by: Dan Murphy <dmurphy@ti.com> --- drivers/net/phy/dp83869.c | 49 +++++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 23 deletions(-) -- 2.23.0