diff mbox series

[4.19,125/422] ARM: dts: exynos: Disable pull control for S5M8767 PMIC

Message ID 20191119051407.074252868@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH Nov. 19, 2019, 5:15 a.m. UTC 
From: Marek Szyprowski <m.szyprowski@samsung.com>


[ Upstream commit ef2ecab9af5feae97c47b7f61cdd96f7f49b2c23 ]

S5M8767 PMIC interrupt line on Exynos5250-based Arndale board has
external pull-up resistors, so disable any pull control for it in
in controller node. This fixes support for S5M8767 interrupts and
enables operation of wakeup from S5M8767 RTC alarm.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Signed-off-by: Sasha Levin <sashal@kernel.org>

---
 arch/arm/boot/dts/exynos5250-arndale.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

-- 
2.20.1
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 9c8ab4b7fb2cf..4ab1f1c66c27f 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -170,6 +170,8 @@ 
 		reg = <0x66>;
 		interrupt-parent = <&gpx3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s5m8767_irq>;
 
 		vinb1-supply = <&main_dc_reg>;
 		vinb2-supply = <&main_dc_reg>;
@@ -530,6 +532,13 @@ 
 	cap-sd-highspeed;
 };
 
+&pinctrl_0 {
+	s5m8767_irq: s5m8767-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
 &rtc {
 	status = "okay";
 };